[PATCH v2 10/23] sunxi: Remove non-DM GMAC pin setup

[Samuel Holland]

This is now handled automatically by the pinctrl driver.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

(no changes since v1)

 arch/arm/include/asm/arch-sunxi/gpio.h |  2 -
 board/sunxi/gmac.c                     | 55 --------------------------
 2 files changed, 57 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index e93c9e84c9..2aa6bbb178 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -135,8 +135,6 @@ enum sunxi_gpio_number {
 #define SUNXI_GPIO_OUTPUT	1
 #define SUNXI_GPIO_DISABLE	7
 
-#define SUN6I_GPA_GMAC		2
-#define SUN7I_GPA_GMAC		5
 #define SUN8I_H3_GPA_UART0	2
 
 #define SUN4I_GPB_PWM		2
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index 1fa54ed72d..2a885305eb 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -1,13 +1,11 @@
 #include <common.h>
 #include <netdev.h>
 #include <miiphy.h>
-#include <asm/gpio.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 
 void eth_init_board(void)
 {
-	int pin;
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 
@@ -21,57 +19,4 @@ void eth_init_board(void)
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
 		CCM_GMAC_CTRL_GPIT_MII);
 #endif
-
-#ifndef CONFIG_MACH_SUN6I
-	/* Configure pin mux settings for GMAC */
-#ifdef CONFIG_SUN7I_GMAC_FORCE_TXERR
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) {
-#else
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
-#endif
-#ifdef CONFIG_RGMII
-		/* skip unused pins in RGMII mode */
-		if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14))
-			continue;
-#endif
-		sunxi_gpio_set_cfgpin(pin, SUN7I_GPA_GMAC);
-		sunxi_gpio_set_drv(pin, 3);
-	}
-#elif defined CONFIG_RGMII
-	/* Configure sun6i RGMII mode pin mux settings */
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) {
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-		sunxi_gpio_set_drv(pin, 3);
-	}
-	for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-		sunxi_gpio_set_drv(pin, 3);
-	}
-	for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(20); pin++) {
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-		sunxi_gpio_set_drv(pin, 3);
-	}
-	for (pin = SUNXI_GPA(25); pin <= SUNXI_GPA(27); pin++) {
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-		sunxi_gpio_set_drv(pin, 3);
-	}
-#elif defined CONFIG_GMII
-	/* Configure sun6i GMII mode pin mux settings */
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(27); pin++) {
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-		sunxi_gpio_set_drv(pin, 2);
-	}
-#else
-	/* Configure sun6i MII mode pin mux settings */
-	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++)
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-	for (pin = SUNXI_GPA(8); pin <= SUNXI_GPA(9); pin++)
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-	for (pin = SUNXI_GPA(11); pin <= SUNXI_GPA(14); pin++)
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-	for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(24); pin++)
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-	for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
-		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
-#endif
 }
-- 
2.33.1