[PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

Pali Rohár pali at kernel.org
Sun May 1 16:52:31 CEST 2022


On Friday 08 April 2022 11:00:24 Pali Rohár wrote:
> On Wednesday 06 April 2022 21:31:18 Marek Behún wrote:
> > On Wed,  6 Apr 2022 11:39:34 +0200
> > Pali Rohár <pali at kernel.org> wrote:
> > 
> > > U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
> > > so always enable macros for booting from these devices.
> > 
> > This is not true. Attaching config where scsi is disabled.
> > 
> > If we want to enforce MMC, SCSI and USB, we should add
> >   select MMC
> > and others to Kconfig under TURRIS_OMNIA. But do we want to enfore
> > these?
> > 
> > Marek
> 
> IIRC macro BOOT_TARGET_DEVICES just defines default values for ENV. So
> in default ENV would be macros for booting from SCSI, MMC and USB
> targets. Which means that if you call saveenv on U-Boot compiled with
> all these options and then replace U-Boot with the one without e.g. MMC
> support, it does not replace env variables for MMC booting.
> 
> Anyway, does not defining e.g. SCSI booting env variables on U-Boot
> without SCSI support result in the same state as defining SCSI booting
> env variables on U-Boot with SCSI support with disconnected SCSI
> controllers or disks? In both cases there would be no SCSI suitable boot
> device.

So, any issues with it?


More information about the U-Boot mailing list