May 2022 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun May 1 01:28:02 CEST 2022
Ending: Tue May 31 21:45:18 CEST 2022
Messages: 2436

• [PATCH u-boot-marvell 01/19] net: mvneta: Get rid of platdata   Ramon Fried
  • [PATCH u-boot-marvell 01/19] net: mvneta: Get rid of platdata   Stefan Roese
• [PATCH u-boot-marvell 06/19] net: mdio-uclass: add dm_phy_find_by_ofnode() helper   Ramon Fried
  • [PATCH u-boot-marvell 06/19] net: mdio-uclass: add dm_phy_find_by_ofnode() helper   Stefan Roese
• [PATCH u-boot-marvell 02/19] net: mvneta: Fix 10Mbps speed   Ramon Fried
  • [PATCH u-boot-marvell 02/19] net: mvneta: Fix 10Mbps speed   Stefan Roese
• [PATCH u-boot-marvell 03/19] net: mvneta: Use DM MDIO API for connecting PHY   Ramon Fried
  • [PATCH u-boot-marvell 03/19] net: mvneta: Use DM MDIO API for connecting PHY   Stefan Roese
• [PATCH u-boot-marvell 04/19] net: mvneta: Remember fixed link instead of PHY address in priv data   Ramon Fried
  • [PATCH u-boot-marvell 04/19] net: mvneta: Remember fixed link instead of PHY address in priv data   Stefan Roese
• [PATCH u-boot-marvell 08/19] net: mvneta: Don't register MDIO bus   Ramon Fried
  • [PATCH u-boot-marvell 08/19] net: mvneta: Don't register MDIO bus   Stefan Roese
• [PATCH u-boot-marvell 09/19] net: mvneta: Fix unused variable warning if DM_GPIO is disabled   Ramon Fried
  • [PATCH u-boot-marvell 09/19] net: mvneta: Fix unused variable warning if DM_GPIO is disabled   Stefan Roese
• [PATCH u-boot-marvell 10/19] net: mvneta: Drop one indentation level in mvneta_adjust_link()   Ramon Fried
  • [PATCH u-boot-marvell 10/19] net: mvneta: Drop one indentation level in mvneta_adjust_link()   Stefan Roese
• [PATCH u-boot-marvell 11/19] net: mvneta: Use bool instead of int for boolean variable   Ramon Fried
  • [PATCH u-boot-marvell 11/19] net: mvneta: Use bool instead of int for boolean variable   Stefan Roese
• [PATCH u-boot-marvell 12/19] net: mvneta: Drop unnecessary space   Ramon Fried
  • [PATCH u-boot-marvell 12/19] net: mvneta: Drop unnecessary space   Stefan Roese
• [PATCH u-boot-marvell 13/19] net: mvneta: Don't check for CONFIG_PHYLIB   Ramon Fried
  • [PATCH u-boot-marvell 13/19] net: mvneta: Don't check for CONFIG_PHYLIB   Stefan Roese
• [PATCH u-boot-marvell 14/19] net: mvneta: Rename CONFIG_NR_CPUS to MVNETA_NR_CPUS   Ramon Fried
  • [PATCH u-boot-marvell 14/19] net: mvneta: Rename CONFIG_NR_CPUS to MVNETA_NR_CPUS   Stefan Roese
• [PATCH u-boot-marvell 15/19] net: mvneta: Convert to use PHY_FIXED for fixed-link   Ramon Fried
  • [PATCH u-boot-marvell 15/19] net: mvneta: Convert to use PHY_FIXED for fixed-link   Stefan Roese
• [PATCH u-boot-marvell 16/19] net: mvneta: Write PHY address just before enabling HW polling   Ramon Fried
  • [PATCH u-boot-marvell 16/19] net: mvneta: Write PHY address just before enabling HW polling   Stefan Roese
• [PATCH u-boot-marvell 17/19] net: mvneta: Drop fixed_link member from private struct   Ramon Fried
  • [PATCH u-boot-marvell 17/19] net: mvneta: Drop fixed_link member from private struct   Stefan Roese
• [PATCH u-boot-marvell 18/19] net: mvneta: Disable fixed PHY code if PHY_FIXED is not compiled in   Ramon Fried
  • [PATCH u-boot-marvell 18/19] net: mvneta: Disable fixed PHY code if PHY_FIXED is not compiled in   Stefan Roese
• [PATCH u-boot-marvell 19/19] net: mvneta: Drop unneeded macro   Ramon Fried
  • [PATCH u-boot-marvell 19/19] net: mvneta: Drop unneeded macro   Stefan Roese
• [PATCH] net: e1000: Depend on CONFIG_PCI   Ramon Fried
  • [PATCH] net: e1000: Depend on CONFIG_PCI   Tom Rini
• [PATCH] net: dm9000: Correctly handle empty FIFO   Ramon Fried
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
  • [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Mark Kettenis
  • [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Tom Rini
  • [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Samuel Holland
    • [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
  • [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 1/2] clk: sunxi: Add additional RTC compatible strings   Samuel Holland
  • [PATCH 2/2] clk: sunxi: Add support for the D1 CCU   Samuel Holland
    • [PATCH 2/2] clk: sunxi: Add support for the D1 CCU   Andre Przywara
  • [PATCH 1/2] clk: sunxi: Add additional RTC compatible strings   Andre Przywara
• [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Nazzareno Trimarchi
  • [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Han Xu
    • [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Nazzareno Trimarchi
      • [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Nazzareno Trimarchi
  • [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Han Xu
    • [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Nazzareno Trimarchi
• [PATCH 1/1] efi_selftest: buildefi_selftest_unaligned.c   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: clean up unaligned unit test   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: error handling in efi_selftest_tcg2   Heinrich Schuchardt
• [PATCH 2/3] imx: imx8mq: default select CLK_IMX8MQ   Peng Fan (OSS)
• [RFC 2/3] serial: mxc: Enable getting and enabling clocks with CCF Composite   Peng Fan (OSS)
  • [RFC 2/3] serial: mxc: Enable getting and enabling clocks with CCF Composite   Adam Ford
• [PATCH] board: freescale: p1_p2_rdb_pc: Enable TDM function only for P1010   Pali Rohár
• [PATCH 1/3] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop   Pali Rohár
  • [PATCH 3/3] board: freescale: p1_p2_rdb_pc: Implement board_reset()   Pali Rohár
• [PATCH 2/3] board: freescale: p1_p2_rdb_pc: Add workaround for non-working watchdog   Pali Rohár
• [PATCH 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+   Josua Mayer
  • [PATCH 1/5] phy: adin: remove broken support for adi, phy-mode-override   Josua Mayer
    • [PATCH 1/5] phy: adin: remove broken support for adi,phy-mode-override   Nate Drude
      • [PATCH 1/5] phy: adin: remove broken support for adi,phy-mode-override   Josua Mayer
      • [PATCH 1/5] phy: adin: remove broken support for adi,phy-mode-override   Nate Drude
      • [PATCH 1/5] phy: adin: remove broken support for adi,phy-mode-override   Josua Mayer
      • [PATCH 1/5] phy: adin: remove broken support for adi,phy-mode-override   Josua Mayer
  • [PATCH 2/5] phy: adin: add support for clock output   Josua Mayer
  • [PATCH 3/5] ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses   Josua Mayer
  • [PATCH 4/5] mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS   Josua Mayer
  • [PATCH 5/5] mx6cuboxi: enable driver for adin1300 phy   Josua Mayer
  • [PATCH 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+   Josua Mayer
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Tom Rini
  • [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH 0/6] board: freescale: p1_p2_rdb_pc: Fix sizes of LBC peripherals   Pali Rohár
  • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Pali Rohár
    • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Tom Rini
      • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Pali Rohár
      • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Tom Rini
      • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Pali Rohár
      • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Tom Rini
      • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Tom Rini
      • [PATCH 1/6] Revert "Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig"   Pali Rohár
  • [PATCH 2/6] Revert "p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIM"   Pali Rohár
    • [PATCH 2/6] Revert "p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIM"   Tom Rini
      • [PATCH 2/6] Revert "p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIM"   Pali Rohár
  • [PATCH 3/6] mpc85xx: Replace magic values in BR/OR PRELIM config options by proper C macros   Pali Rohár
  • [PATCH 4/6] board: freescale: p1_p2_rdb_pc: Fix size of CPLD mapping   Pali Rohár
  • [PATCH 5/6] board: freescale: p1_p2_rdb_pc: Fix size of FLASH NOR mapping   Pali Rohár
  • [PATCH 6/6] board: freescale: p1_p2_rdb_pc: Fix size of NAND mapping   Pali Rohár
• [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets   Pali Rohár
  • [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets   Marek Behún
  • [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets   Stefan Roese
• [PATCH u-boot-marvell 0/8] Turris Omnia: Add support for configuring mSATA and WWAN slots via env variables   Pali Rohár
  • [PATCH u-boot-marvell 0/8] Turris Omnia: Add support for configuring mSATA and WWAN slots via env variables   Stefan Roese
• [PATCH] pci: Do not enable PCIe ASMedia ASM2824 workaround by default   Pali Rohár
  • [PATCH] pci: Do not enable PCIe ASMedia ASM2824 workaround by default   Maciej W. Rozycki
    • [PATCH] pci: Do not enable PCIe ASMedia ASM2824 workaround by default   Maciej W. Rozycki
• [PATCH v5 03/17] menu: always show the menu regardless of the number of entry   Heinrich Schuchardt
• [PATCH] powerpc: fsl_law: Add definition for first PCIe target interface   Pali Rohár
• Pull request for efi-2022-07-rc2   Tom Rini
• [PATCH 1/2] ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM   Marek Vasut
  • [PATCH 2/2] ARM: stm32: Use CONFIG_TFTP_TSIZE on DHSOM   Marek Vasut
    • [PATCH 2/2] ARM: stm32: Use CONFIG_TFTP_TSIZE on DHSOM   Ramon Fried
    • [PATCH 2/2] ARM: stm32: Use CONFIG_TFTP_TSIZE on DHSOM   Patrick DELAUNAY
    • [PATCH 2/2] ARM: stm32: Use CONFIG_TFTP_TSIZE on DHSOM   Patrice CHOTARD
  • [PATCH 1/2] ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM   Ramon Fried
  • [PATCH 1/2] ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM   Patrick DELAUNAY
    • [PATCH 1/2] ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM   Patrice CHOTARD
• [PATCH] net: Fix discuss discard typo   Marek Vasut
• [PATCH] powerpc: mmu: Fix FSL_BOOKE_MAS2() macro   Pali Rohár
• [PATCH v5 05/17] efi_loader: export efi_locate_device_handle()   Heinrich Schuchardt
  • [PATCH v5 05/17] efi_loader: export efi_locate_device_handle()   Ilias Apalodimas
• [PATCH v5 08/17] bootmenu: update bootmenu_entry structure   Heinrich Schuchardt
  • [PATCH v5 08/17] bootmenu: update bootmenu_entry structure   Masahisa Kojima
• [PATCH 1/1] cmd: simplify bootmenu   Heinrich Schuchardt
• [PATCH v5 09/17] bootmenu: add UEFI boot entry into bootmenu   Heinrich Schuchardt
  • [PATCH v5 09/17] bootmenu: add UEFI boot entry into bootmenu   Masahisa Kojima
• [PATCH v5 10/17] bootmenu: add distro boot entry   Heinrich Schuchardt
  • [PATCH v5 10/17] bootmenu: add distro boot entry   Takahiro Akashi
    • [PATCH v5 10/17] bootmenu: add distro boot entry   Heinrich Schuchardt
      • [PATCH v5 10/17] bootmenu: add distro boot entry   Mark Kettenis
• [PATCH] ARM: mvebu: x530: set MPP55 to gpio   Chris Packham
  • [PATCH] ARM: mvebu: x530: set MPP55 to gpio   Stefan Roese
  • [PATCH] ARM: mvebu: x530: set MPP55 to gpio   Stefan Roese
• [PATCH 1/2] misc: i2c_eeprom: add support for microchip 24aa025e48   Heiko Schocher
  • [PATCH 1/2] misc: i2c_eeprom: add support for microchip 24aa025e48   Michael Walle
    • [PATCH 1/2] misc: i2c_eeprom: add support for microchip 24aa025e48   Eugen.Hristev at microchip.com
      • [PATCH 1/2] misc: i2c_eeprom: add support for microchip 24aa025e48   Heiko Schocher
• [PATCH 1/1] lib: fix selection of CONFIG_CHARSET   Heinrich Schuchardt
• [PATCH] arm: mvebu: clearfog_defconfig: enable setexpr command   Stefan Roese
  • [PATCH] arm: mvebu: clearfog_defconfig: enable setexpr command   Stefan Roese
• [PATCH] arm: mvebu: turris_omnia: Fix SYS_RSTOUT_* macro names   Stefan Roese
  • [PATCH] arm: mvebu: turris_omnia: Fix SYS_RSTOUT_* macro names   Stefan Roese
• [PATCH u-boot-marvell 00/19] some mvneta changes, cleanups, fixes   Stefan Roese
  • [PATCH u-boot-marvell 00/19] some mvneta changes, cleanups, fixes   Stefan Roese
• [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV   Stefan Roese
  • [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV   Stefan Roese
• [PATCH] i.MX6SX: crypto/fsl: fix entropy delay value   Gaurav Jain
  • [PATCH] i.MX6SX: crypto/fsl: fix entropy delay value   sbabic at denx.de
• [PATCH 07/15] imx: imx8m[m/p]_phycore: Enable DM_SERIAL   Teresa Remmet
• [PATCH u-boot-marvell 05/19] arm: mvebu: Espressobin: Use DM registered MDIO to configure switch   Stefan Roese
• [PATCH u-boot-marvell 07/19] arm: mvebu: turris_mox: Use DM registered MDIO   Stefan Roese
• [PATCH v1] arm: dts: rockchip: rk3288: bulk convert gpios to their constant counterparts   Johan Jonker
  • [PATCH v1] arm: dts: rockchip: rk3288: bulk convert gpios to their constant counterparts   Kever Yang
• [PATCH v1] arm: dts: rockchip: rk3288: rename mmc nodenames   Johan Jonker
  • [PATCH v1] arm: dts: rockchip: rk3288: rename mmc nodenames   Kever Yang
• [PATCH v1] arm: dts: rockchip: rk3288: sort mipi hdmi lvds and dp nodes   Johan Jonker
  • [PATCH v1] arm: dts: rockchip: rk3288: sort mipi hdmi lvds and dp nodes   Kever Yang
• SquashFS not compiling due to missing __udivmoddi4 (x86)   Sean Nyekjaer
  • SquashFS not compiling due to missing __udivmoddi4 (x86)   Tom Rini
• [PATCH v1] arm: dts: rockchip: rk3288: move dma-controller nodes   Johan Jonker
  • [PATCH v1] arm: dts: rockchip: rk3288: move dma-controller nodes   Kever Yang
• [PATCH] configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE   Peng Fan (OSS)
• [PATCH V2] configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE   Peng Fan (OSS)
  • [PATCH V2] configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE   Marcel Ziswiler
• [PATCH 00/12] split tlv_eeprom command into a separate library   Josua Mayer
  • [PATCH 01/12] cmd: tlv_eeprom: remove use of global variable current_dev   Josua Mayer
    • [PATCH 01/12] cmd: tlv_eeprom: remove use of global variable current_dev   Stefan Roese
      • [PATCH 01/12] cmd: tlv_eeprom: remove use of global variable current_dev   Josua Mayer
  • [PATCH 02/12] cmd: tlv_eeprom: remove use of global variable has_been_read   Josua Mayer
    • [PATCH 02/12] cmd: tlv_eeprom: remove use of global variable has_been_read   Stefan Roese
  • [PATCH 03/12] cmd: tlv_eeprom: do_tlv_eeprom: stop using non-api read_eeprom function   Josua Mayer
    • [PATCH 03/12] cmd: tlv_eeprom: do_tlv_eeprom: stop using non-api read_eeprom function   Stefan Roese
  • [PATCH 04/12] cmd: tlv_eeprom: convert functions used by command to api functions   Josua Mayer
    • [PATCH 04/12] cmd: tlv_eeprom: convert functions used by command to api functions   Stefan Roese
      • [PATCH 04/12] cmd: tlv_eeprom: convert functions used by command to api functions   Josua Mayer
      • [PATCH 04/12] cmd: tlv_eeprom: convert functions used by command to api functions   Stefan Roese
      • [PATCH 04/12] cmd: tlv_eeprom: convert functions used by command to api functions   Josua Mayer
      • [PATCH 04/12] cmd: tlv_eeprom: convert functions used by command to api functions   Stefan Roese
  • [PATCH 05/12] cmd: tlv_eeprom: remove empty function implementations from header   Josua Mayer
  • [PATCH 06/12] cmd: tlv_eeprom: move missing declarations and defines to header   Josua Mayer
  • [PATCH 07/12] cmd: tlv_eeprom: hide access to static tlv_devices array behind accessor   Josua Mayer
  • [PATCH 08/12] cmd: tlv_eeprom: clean up two defines for one thing   Josua Mayer
  • [PATCH 09/12] cmd: tlv_eeprom: add my copyright   Josua Mayer
  • [PATCH 10/12] cmd: tlv_eeprom: split off tlv library from command   Josua Mayer
  • [PATCH 11/12] arm: mvebu: clearfog: enable tlv library for spl in favour of eeprom cmd   Josua Mayer
  • [PATCH 12/12] lib: tlv_eeprom: add function for reading one entry into a C string   Josua Mayer
• [PATCH] board_r: use IS_ENABLED(CONFIG_NEEDS_MANUAL_RELOC) in board_init_r()   Ovidiu Panait
  • [PATCH] board_r: use IS_ENABLED(CONFIG_NEEDS_MANUAL_RELOC) in board_init_r()   Tom Rini
• [PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message   Stefan Roese
• [PATCH 4/5] arm: mvebu: turris_omnia: Add NVMe to boot targets   Stefan Roese
• [PATCH 5/5] arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets   Stefan Roese
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Stefan Roese
• [PATCH] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
  • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
• [PATCH v2 00/52] mips: octeon: Add ethernet support   Stefan Roese
  • [PATCH v2 00/52] mips: octeon: Add ethernet support   Daniel Schwierzeck
  • [PATCH v2 00/52] mips: octeon: Add ethernet support   Stefan Roese
• [PATCH v2 03/12] sandbox: Migrate getopt section to linker list   Andrew Scull
  • [PATCH v2 03/12] sandbox: Migrate getopt section to linker list   Tom Rini
    • [PATCH v2 03/12] sandbox: Migrate getopt section to linker list   Andrew Scull
      • [PATCH v2 03/12] sandbox: Migrate getopt section to linker list   Andrew Scull
• [PATCH] board: freescale: p1_p2_rdb_pc: Allow to compile without CONFIG_BOARDNAME   Pali Rohár
• [PATCH] mtd: rawnand: fsl_elbc: Fix DM support in DTS code path   Pali Rohár
• [PATCH] powerpc: mpc85xx: Set default SYS_IMMR value for P1/P2 CPUs   Pali Rohár
• [PATCH 0/2] powerpc: mpc85xx: Fix NOR booting   Pali Rohár
  • [PATCH 1/2] powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting   Pali Rohár
    • [PATCH 1/2] powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting   Tom Rini
      • [PATCH 1/2] powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting   Pali Rohár
  • [PATCH 2/2] powerpc: mpc85xx: Fix CONFIG_OF_EMBED support for NOR booting   Pali Rohár
    • [PATCH 2/2] powerpc: mpc85xx: Fix CONFIG_OF_EMBED support for NOR booting   Tom Rini
  • [PATCH 0/2] powerpc: mpc85xx: Fix NOR booting   Pali Rohár
• [PATCH] watchdog: Add MAX6370 watchdog timer driver   Pali Rohár
  • [PATCH] watchdog: Add MAX6370 watchdog timer driver   Stefan Roese
    • [PATCH] watchdog: Add MAX6370 watchdog timer driver   Pali Rohár
      • [PATCH] watchdog: Add MAX6370 watchdog timer driver   Pali Rohár
      • [PATCH] watchdog: Add MAX6370 watchdog timer driver   Stefan Roese
  • [PATCH] watchdog: Add MAX6370 watchdog timer driver   Stefan Roese
• [PATCH 02/15] imx: imx8m[m/n/p]_venice: Enable SPL_DM_SERIAL   Tim Harvey
  • [PATCH 02/15] imx: imx8m[m/n/p]_venice: Enable SPL_DM_SERIAL   Peng Fan (OSS)
• [PATCH 08/15] imx: imx8mn_var_som: enable DM_SERIAL   Ariel D'Alessandro
• [RFC PATCH] efi_loader: add sha384/512 on certificate revocation   Stuart Yoder
• [PATCH] pwm: aspeed: Select SYSCON to get parent detail.   ChiaWei Wang
• [PATCH V2] imx: drop CONFIG_MXC_UART_BASE   Peng Fan (OSS)
  • [PATCH V2] imx: drop CONFIG_MXC_UART_BASE   Soeren Moch
• [PATCH 11/15] imx: imx8mn_bsh_smm_s2: drop CONFIG_MXC_UART_BASE   Peng Fan (OSS)
• [PATCH] efi_loader: Select EVENT as well   Jan Kiszka
  • [PATCH] efi_loader: Select EVENT as well   Heinrich Schuchardt
• [PATCH v6] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
  • [PATCH v6] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Sean Anderson
    • [PATCH v6] pinctrl: nuvoton: Add NPCM8xx pinctrl driver   Stanley Chu
• [PATCH 10/15] imx: kontron-sl-mx8mm: enable DM_SERIAL   Frieder Schrempf
• [PATCH] mmc: zynq_sdhci: Add weak function prototype   Michal Simek
  • [PATCH] mmc: zynq_sdhci: Add weak function prototype   Jaehoon Chung
• [PATCH] Revert "arm64: xilinx: Set CONFIG_ZYNQMP_FIRMWARE config for mini emmc"   Michal Simek
• [PATCH] xilinx: Handle board_get_usable_ram_top(0) properly   Michal Simek
• [PATCH v7 2/7] fpga: add fit_fpga_load function   Michal Simek
  • [PATCH v7 2/7] fpga: add fit_fpga_load function   Adrian Fiergolski
    • [PATCH v7 2/7] fpga: add fit_fpga_load function   Oleksandr Suvorov
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Adrian Fiergolski
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Oleksandr Suvorov
    • [PATCH v7 2/7] fpga: add fit_fpga_load function   Oleksandr Suvorov
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Adrian Fiergolski
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Oleksandr Suvorov
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Adrian Fiergolski
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Michal Simek
      • [PATCH v7 2/7] fpga: add fit_fpga_load function   Oleksandr Suvorov
• [PATCH v7 4/7] fpga: xilinx: add missed identifier names   Michal Simek
• [PATCH v7 5/7] fpga: xilinx: pass xilinx_desc pointer address into load() ops   Michal Simek
• [PATCH v7 6/7] fpga: zynqmp: support loading authenticated images   Michal Simek
  • [PATCH v7 6/7] fpga: zynqmp: support loading authenticated images   Oleksandr Suvorov
• [PATCH v7 0/7] fpga: zynqmp: Adding support of loading authenticated images   Michal Simek
• [RFC] Data structure for information handoff between firmware boot stages   Simon Glass
  • [RFC] Data structure for information handoff between firmware boot stages   Jose Marinho
    • [RFC] Data structure for information handoff between firmware boot stages   Simon Glass
      • [RFC] Data structure for information handoff between firmware boot stages   Jose Marinho
• [PATCH v2] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [PATCH v1] imx: imx8qm-rom7720: switch to binman   Oliver Graute
• [PATCH 1/2] ARM: tegra: XUSB padctl: Add new lines for errors   Peter Robinson
  • [PATCH 2/2] pci: tegra: Update error prints with new lines   Peter Robinson
• [PATCH] arm: tegra: Update some DT compatibles   Peter Robinson
• [PATCH v3 08/13] misc: Add support for nvmem cells   Simon Glass
  • [PATCH v3 08/13] misc: Add support for nvmem cells   Sean Anderson
• [PATCH 1/2] pmic: pca9450: add DM_I2C dependencies in Kconfig   Rasmus Villemoes
  • [PATCH 1/2] pmic: pca9450: add DM_I2C dependencies in Kconfig   Jaehoon Chung
• [PATCH 2/2] pmic: pca9450: drop pointless .data entries   Rasmus Villemoes
  • [PATCH 2/2] pmic: pca9450: drop pointless .data entries   Jaehoon Chung
• [PATCH] arm: mvebu: Espressobin: Add NVMe to boot targets   Pali Rohár
  • [PATCH] arm: mvebu: Espressobin: Add NVMe to boot targets   Stefan Roese
  • [PATCH] arm: mvebu: Espressobin: Add NVMe to boot targets   Stefan Roese
    • [PATCH] arm: mvebu: Espressobin: Add NVMe to boot targets   Pali Rohár
• [PATCH] cmd: mvebu: Hide bubt specific options when bubt is disabled   Pali Rohár
  • [PATCH] cmd: mvebu: Hide bubt specific options when bubt is disabled   Stefan Roese
  • [PATCH] cmd: mvebu: Hide bubt specific options when bubt is disabled   Stefan Roese
• [PATCH] Convert CONFIG_MTD_CONCAT to Kconfig   Chris Packham
  • [PATCH] Convert CONFIG_MTD_CONCAT to Kconfig   Tom Rini
  • [PATCH] Convert CONFIG_MTD_CONCAT to Kconfig   Stefan Roese
  • [PATCH] Convert CONFIG_MTD_CONCAT to Kconfig   Tom Rini
• Help porting U-Boot to samsung-espresso3g   Mighty M
• [PATCH v3] imx: imx8qm: cgtqmx8: switch to binman   Oliver Graute
• [PATCH] mtd: spi-nor-ids: add Macronix flash entry   Jagan Teki
• [PATCH v1] imx: enable ahab on imx8qm-rom7720   Oliver Graute
• [PATCH 1/4] configs: imx8m: use common imx8m.h for i.MX8MM   Peng Fan (OSS)
  • [PATCH 2/4] configs: imx8m: use common imx8m.h for i.MX8MN   Peng Fan (OSS)
    • [PATCH 2/4] configs: imx8m: use common imx8m.h for i.MX8MN   Tim Harvey
      • [PATCH 2/4] configs: imx8m: use common imx8m.h for i.MX8MN   Ariel D'Alessandro
      • [PATCH 2/4] configs: imx8m: use common imx8m.h for i.MX8MN   Ariel D'Alessandro
  • [PATCH 3/4] configs: imx8m: use common imx8m.h for i.MX8MP   Peng Fan (OSS)
    • [PATCH 3/4] configs: imx8m: use common imx8m.h for i.MX8MP   Tim Harvey
  • [PATCH 4/4] configs: imx8m: use common imx8m.h for i.MX8MQ   Peng Fan (OSS)
  • [PATCH 1/4] configs: imx8m: use common imx8m.h for i.MX8MM   Tim Harvey
• [PATCH v2] spi: npcm-fiu: add NPCM7xx FIU controller driver   Jagan Teki
  • [PATCH v2] spi: npcm-fiu: add NPCM7xx FIU controller driver   Jim Liu
  • [PATCH v2] spi: npcm-fiu: add NPCM7xx FIU controller driver   Jagan Teki
• [PATCH 00/17] imx: imx8m: clean up wdog code   Peng Fan (OSS)
  • [PATCH 01/17] imx: imx8mn_evk: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 02/17] imx: imx8mm_evk: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 03/17] imx: imx8mp_evk: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 04/17] imx: imx8mm_beacon: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 05/17] imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 06/17] imx: imx8mm-data-modul-edm-sbc: enable pinctrl_wdog in SPL   Peng Fan (OSS)
    • [PATCH 06/17] imx: imx8mm-data-modul-edm-sbc: enable pinctrl_wdog in SPL   Marek Vasut
      • [PATCH 06/17] imx: imx8mm-data-modul-edm-sbc: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 07/17] imx: engicam-imx8mm: drop unused macro   Peng Fan (OSS)
    • [PATCH 07/17] imx: engicam-imx8mm: drop unused macro   Michael Nazzareno Trimarchi
  • [PATCH 08/17] imx: imx8mm-mx8menlo: drop unneeded watchdog settings   Peng Fan (OSS)
  • [PATCH 09/17] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL   Peng Fan (OSS)
    • [PATCH 09/17] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL   Tim Harvey
  • [PATCH 10/17] imx: imx8mn-beacon: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 11/17] imx: imx8mn_smm_s2: clean up board watchdog code   Peng Fan (OSS)
    • [PATCH 11/17] imx: imx8mn_smm_s2: clean up board watchdog code   Ariel D'Alessandro
  • [PATCH 12/17] imx: imx8mn_var_som: clean up board watchdog code   Peng Fan (OSS)
    • [PATCH 12/17] imx: imx8mn_var_som: clean up board watchdog code   Ariel D'Alessandro
  • [PATCH 13/17] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL   Peng Fan (OSS)
  • [PATCH 14/17] imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 15/17] imx: phycore_imx8mm/p: clean up board watchdog code   Peng Fan (OSS)
    • [PATCH 15/17] imx: phycore_imx8mm/p: clean up board watchdog code   Teresa Remmet
  • [PATCH 16/17] imx: verdin-imx8mm/p: cleanup board watchdog code   Peng Fan (OSS)
  • [PATCH 17/17] imx: toradex/verdin-imx8mm/p: cleanup board watchdog code   Peng Fan (OSS)
• [PATCH v2 0/2] sf: dataflash: add support for AT45DB641E   Jagan Teki
• [PATCH] CI: Azure: Rework how we update MSYS2   Tom Rini
  • [PATCH] CI: Azure: Rework how we update MSYS2   Tom Rini
    • [PATCH] CI: Azure: Rework how we update MSYS2   Tom Rini
• [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver   Jagan Teki
  • [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
    • [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver   Jagan Teki
      • [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
• [PATCH] common/console.c: use CONFIG_VAL() with PRE_CON_BUF_* variables   Rasmus Villemoes
  • [PATCH] common/console.c: prevent pre-console buffer contents from being added to itself   Rasmus Villemoes
  • [PATCH] common/console.c: use CONFIG_VAL() with PRE_CON_BUF_* variables   Tom Rini
• [PATCH v8 01/13] doc: Convert SPL documentation to ReST   Tom Rini
• [PATCH V2] nvmem: add driver handling U-Boot environment variables   Rafał Miłecki
  • [PATCH V2] nvmem: add driver handling U-Boot environment variables   Ahmad Fatoum
    • [PATCH V2] nvmem: add driver handling U-Boot environment variables   Rafał Miłecki
      • [PATCH V2] nvmem: add driver handling U-Boot environment variables   Ahmad Fatoum
• [PATCH] rockchip: rk3328: nanopi-r2s: Use the sdcard for the env   Emmanuel Vadot
  • [PATCH] rockchip: rk3328: nanopi-r2s: Use the sdcard for the env   Kever Yang
• [PATCH] imx8mn_evk: Add the missing spl.bin entry   Fabio Estevam
  • [PATCH] imx8mn_evk: Add the missing spl.bin entry   Tim Harvey
  • [PATCH] imx8mn_evk: Add the missing spl.bin entry   Arti Zirk
  • [PATCH] imx8mn_evk: Add the missing spl.bin entry   Alper Nebi Yasak
• [PATCH 1/1] dm: fix DM_EVENT dependencies   Heinrich Schuchardt
  • [PATCH 1/1] dm: fix DM_EVENT dependencies   Tom Rini
    • [PATCH 1/1] dm: fix DM_EVENT dependencies   Heinrich Schuchardt
      • [PATCH 1/1] dm: fix DM_EVENT dependencies   Tom Rini
• [PATCH 0/7] sunxi: F1C100s: enable MMC and SPI in U-Boot proper   Andre Przywara
  • [PATCH 1/7] clk: sunxi: implement clock driver for suniv f1c100s   Andre Przywara
    • [PATCH 1/7] clk: sunxi: implement clock driver for suniv f1c100s   Andre Przywara
  • [PATCH 2/7] spi: sunxi: refactor SPI speed/mode programming   Andre Przywara
  • [PATCH 3/7] spi: sunxi: improve SPI clock calculation   Andre Przywara
  • [PATCH 4/7] spi: sunxi: Add support for F1C100s SPI controller   Andre Przywara
  • [PATCH 5/7] sunxi: F1C100s: update DT files from Linux   Andre Przywara
    • [PATCH 5/7] sunxi: F1C100s: update DT files from Linux   Jesse Taube
    • [PATCH 5/7] sunxi: F1C100s: update DT files from Linux   Andre Przywara
  • [PATCH 6/7] Revert "sunxi: f1c100s: Drop SYSRESET to enable reset functionality"   Andre Przywara
    • [PATCH 6/7] Revert "sunxi: f1c100s: Drop SYSRESET to enable reset functionality"   Andre Przywara
  • [PATCH 7/7] sunxi: licheepi_nano: enable SPI flash   Andre Przywara
• [PATCH v3 01/18] virtio: pci: Allow exclusion of legacy driver   Tom Rini
• [PATCH 1/1] cmd: mmc: don't assign unused values   Minkyu Kang
  • [PATCH 1/1] cmd: mmc: don't assign unused values   Tom Rini
• Pull request: u-boot-spi/master   Jagan Teki
  • Pull request: u-boot-spi/master   Tom Rini
• [PATCH] arm64: zynqmp: Fix split mode reset functionality   Michal Simek
  • [PATCH] arm64: zynqmp: Fix split mode reset functionality   Michal Simek
• [RFC PATCH 2/8] rockchip: Add binman definitions for final images   Andrew Abbott
  • [RFC PATCH 2/8] rockchip: Add binman definitions for final images   Alper Nebi Yasak
• [PATCH 1/3] ARM: dts: am335x: guardian: switch to AM33XX_PADCONF   Gireesh.Hiremath at in.bosch.com
  • [PATCH 2/3] configs: am335x_guardian: Enable DM_I2C   Gireesh.Hiremath at in.bosch.com
    • [PATCH 2/3] configs: am335x_guardian: Enable DM_I2C   Tom Rini
    • [PATCH 2/3] configs: am335x_guardian: Enable DM_I2C   Tom Rini
  • [PATCH 3/3] am335x, guardian: Drop non DM_I2C code   Gireesh.Hiremath at in.bosch.com
    • [PATCH 3/3] am335x, guardian: Drop non DM_I2C code   Tom Rini
    • [PATCH 3/3] am335x, guardian: Drop non DM_I2C code   Tom Rini
  • [PATCH 1/3] ARM: dts: am335x: guardian: switch to AM33XX_PADCONF   Tom Rini
  • [PATCH 1/3] ARM: dts: am335x: guardian: switch to AM33XX_PADCONF   Tom Rini
• i.MX8MP usb status   Peng Fan
  • i.MX8MP usb status   Marek Vasut
    • i.MX8MP usb status   Peng Fan (OSS)
      • i.MX8MP usb status   Marek Vasut
      • i.MX8MP usb status   Tim Harvey
      • i.MX8MP usb status   Marcel Ziswiler
      • i.MX8MP usb status   Fabio Estevam
      • i.MX8MP usb status   Tommaso Merciai
      • i.MX8MP usb status   Mircea Ciocan
      • i.MX8MP usb status   Tim Harvey
      • i.MX8MP usb status   Fabio Estevam
      • i.MX8MP usb status   Tommaso Merciai
    • i.MX8MP usb status   Tim Harvey
      • i.MX8MP usb status   Tim Harvey
      • i.MX8MP usb status   Marek Vasut
      • i.MX8MP usb status   Tim Harvey
• [PATCH] ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI   Marek Vasut
  • [PATCH] ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI   Patrice CHOTARD
  • [PATCH] ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI   Patrick DELAUNAY
    • [PATCH] ARM: dts: stm32: Move DHCOR BUCK3 VDD 2V9 adjustment to 1V8 DTSI   Patrice CHOTARD
• Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Rafał Miłecki
• [PATCH v2 1/2] cmd: bcb: introduce optional interface parameter to bcb   Igor Opaniuk
• Pull request for efi-2022-07-rc2-2   Heinrich Schuchardt
  • Pull request for efi-2022-07-rc2-2   Tom Rini
• [PATCH v2 2/2] cmd: avb: introduce optional interface parameter to avb init   Igor Opaniuk
• [PATCH 1/4] spl: Rename Kconfig SPL_LEGACY_IMAGE_SUPPORT to SPL_LEGACY_IMAGE_FORMAT   Andrew Davis
  • [PATCH 2/4] spl: Force disable non-FIT loading for TI secure devices   Andrew Davis
    • [PATCH 2/4] spl: Force disable non-FIT loading for TI secure devices   Tom Rini
    • [PATCH 2/4] spl: Force disable non-FIT loading for TI secure devices   Tom Rini
  • [PATCH 4/4] boot: Kconfig: Enable FIT processing by default on TI secure devices   Andrew Davis
    • [PATCH 4/4] boot: Kconfig: Enable FIT processing by default on TI secure devices   Tom Rini
    • [PATCH 4/4] boot: Kconfig: Enable FIT processing by default on TI secure devices   Tom Rini
  • [PATCH 1/4] spl: Rename Kconfig SPL_LEGACY_IMAGE_SUPPORT to SPL_LEGACY_IMAGE_FORMAT   Tom Rini
  • [PATCH 1/4] spl: Rename Kconfig SPL_LEGACY_IMAGE_SUPPORT to SPL_LEGACY_IMAGE_FORMAT   Tom Rini
• [PATCH 3/4] boot: Kconfig: Disable non-FIT loading for TI secure devices   Andrew Davis
  • [PATCH 3/4] boot: Kconfig: Disable non-FIT loading for TI secure devices   Tom Rini
  • [PATCH 3/4] boot: Kconfig: Disable non-FIT loading for TI secure devices   Tom Rini
• [PATCH v2 3/9] spl: Convert fat to spl_load   Tom Rini
  • [PATCH v2 3/9] spl: Convert fat to spl_load   Sean Anderson
    • [PATCH v2 3/9] spl: Convert fat to spl_load   Tom Rini
      • [PATCH v2 3/9] spl: Convert fat to spl_load   Sean Anderson
      • [PATCH v2 3/9] spl: Convert fat to spl_load   Tom Rini
      • [PATCH v2 3/9] spl: Convert fat to spl_load   Sean Anderson
      • [PATCH v2 3/9] spl: Convert fat to spl_load   Tom Rini
• [PATCH v3 14/15] net: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH] arm: mvebu: Remove unused ARMADA_64BIT   Chris Packham
  • [PATCH] arm: mvebu: Remove unused ARMADA_64BIT   Stefan Roese
  • [PATCH] arm: mvebu: Remove unused ARMADA_64BIT   Stefan Roese
• [PATCH V2 00/14] imx8m: convert to DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 01/14] imx: imx8mp_rsb3720a1: convert to DM_SERIAL   Peng Fan (OSS)
    • [PATCH V2 01/14] imx: imx8mp_rsb3720a1: convert to DM_SERIAL   sbabic at denx.de
  • [PATCH V2 02/14] imx: imx8m[m/n/p]_venice: Enable SPL_DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 03/14] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Peng Fan (OSS)
    • [PATCH V2 03/14] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Marcel Ziswiler
    • [PATCH V2 03/14] imx: imx8mm_mx8menlo: Enable DM_SERIAL   sbabic at denx.de
  • [PATCH V2 04/14] imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 05/14] imx: imx8mm-cl-iot-gate: Enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 06/14] imx: imx8mm_icore: Enable SPL_DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 07/14] imx: imx8m[m/p]_phycore: Enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 08/14] imx: imx8mn_var_som: enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 09/14] imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL   Peng Fan (OSS)
    • [PATCH V2 09/14] imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL   sbabic at denx.de
  • [PATCH V2 10/14] imx: kontron-sl-mx8mm: enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH V2 11/14] imx: dts: move common changes to imx8mq-u-boot.dtsi   Peng Fan (OSS)
    • [PATCH V2 11/14] imx: dts: move common changes to imx8mq-u-boot.dtsi   sbabic at denx.de
  • [PATCH V2 12/14] imx: imx8mq-cm: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
    • [PATCH V2 12/14] imx: imx8mq-cm: enable CONFIG_DM_SERIAL   sbabic at denx.de
  • [PATCH V2 13/14] imx: imx8mq-pico: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
    • [PATCH V2 13/14] imx: imx8mq-pico: enable CONFIG_DM_SERIAL   sbabic at denx.de
  • [PATCH V2 14/14] imx: imx8mq-phanbell: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
    • [PATCH V2 14/14] imx: imx8mq-phanbell: enable CONFIG_DM_SERIAL   sbabic at denx.de
• [PATCH] arm64: zynqmp: zynqmp-zcu102-revA: Fix DP PLL configuration   Michal Simek
  • [PATCH] arm64: zynqmp: zynqmp-zcu102-revA: Fix DP PLL configuration   Michal Simek
• [PATCH] arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration   Michal Simek
  • [PATCH] arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration   Michal Simek
• [PATCH V2 0/4] imx: imx8m: simplify code with a common header file   Peng Fan (OSS)
  • [PATCH V2 1/4] configs: imx8m: use common imx8m.h for i.MX8MM   Peng Fan (OSS)
  • [PATCH V2 2/4] configs: imx8m: use common imx8m.h for i.MX8MN   Peng Fan (OSS)
  • [PATCH V2 3/4] configs: imx8m: use common imx8m.h for i.MX8MP   Peng Fan (OSS)
  • [PATCH V2 4/4] configs: imx8m: use common imx8m.h for i.MX8MQ   Peng Fan (OSS)
• [PATCH] fs/squashfs: use do_div function for math   Sean Nyekjaer
  • [PATCH] fs/squashfs: use do_div function for math   Tom Rini
    • [PATCH] fs/squashfs: use do_div function for math   Miquel Raynal
      • [PATCH] fs/squashfs: use do_div function for math   Pali Rohár
      • [PATCH] fs/squashfs: use do_div function for math   Pali Rohár
      • [PATCH] fs/squashfs: use do_div function for math   Sean Nyekjaer
      • [PATCH] fs/squashfs: use do_div function for math   Tom Rini
      • [PATCH] fs/squashfs: use do_div function for math   Pali Rohár
      • [PATCH] fs/squashfs: use do_div function for math   Sean Nyekjaer
      • [PATCH] fs/squashfs: use do_div function for math   Michael Nazzareno Trimarchi
      • [PATCH] fs/squashfs: use do_div function for math   Pali Rohár
• [PATCH V2 00/16] imx: imx8m: clean up wdog code   Peng Fan (OSS)
  • [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL   Peng Fan (OSS)
    • [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL   sbabic at denx.de
  • [PATCH V2 02/16] imx: imx8mm_evk: enable pinctrl_wdog in SPL   Peng Fan (OSS)
    • [PATCH V2 02/16] imx: imx8mm_evk: enable pinctrl_wdog in SPL   sbabic at denx.de
  • [PATCH V2 04/16] imx: imx8mm_beacon: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH V2 05/16] imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH V2 06/16] imx: engicam-imx8mm: drop unused macro   Peng Fan (OSS)
  • [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings   Peng Fan (OSS)
    • [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings   Marek Vasut
    • [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings   sbabic at denx.de
  • [PATCH V2 08/16] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH V2 09/16] imx: imx8mn-beacon: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code   Peng Fan (OSS)
    • [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code   sbabic at denx.de
  • [PATCH V2 11/16] imx: imx8mn_var_som: clean up board watchdog code   Peng Fan (OSS)
  • [PATCH V2 12/16] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL   Peng Fan (OSS)
  • [PATCH V2 13/16] imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH V2 14/16] imx: phycore_imx8mm/p: clean up board watchdog code   Peng Fan (OSS)
  • [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup board watchdog code   Peng Fan (OSS)
    • [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup board watchdog code   Marcel Ziswiler
    • [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup board watchdog code   sbabic at denx.de
  • [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: cleanup board watchdog code   Peng Fan (OSS)
    • [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: cleanup board watchdog code   sbabic at denx.de
• [PATCH V2 03/16] imx: imx8mp_evk: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH V2 03/16] imx: imx8mp_evk: enable pinctrl_wdog in SPL   sbabic at denx.de
• [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Mark Kettenis
  • [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Heinrich Schuchardt
    • [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Heinrich Schuchardt
      • [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Mark Kettenis
  • [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Mark Kettenis
    • [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   AKASHI Takahiro
      • Re: [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Heinrich Schuchardt
• [PATCH] ARM: stm32: Use CONFIG_TFTP_TSIZE on STMicroelectronics boards   Patrick Delaunay
  • [PATCH] ARM: stm32: Use CONFIG_TFTP_TSIZE on STMicroelectronics boards   Patrice CHOTARD
  • [PATCH] ARM: stm32: Use CONFIG_TFTP_TSIZE on STMicroelectronics boards   Patrice CHOTARD
• [PATCH 1/2] usb: host: ehci-generic: Make usage of clock/reset bulk() API   Patrice Chotard
  • [PATCH 2/2] usb: host: ehci-generic: Remove DM_REGULATOR flag   Patrice Chotard
    • [PATCH 2/2] usb: host: ehci-generic: Remove DM_REGULATOR flag   Marek Vasut
      • [PATCH 2/2] usb: host: ehci-generic: Remove DM_REGULATOR flag   Patrice CHOTARD
      • [PATCH 2/2] usb: host: ehci-generic: Remove DM_REGULATOR flag   Marek Vasut
  • [PATCH 1/2] usb: host: ehci-generic: Make usage of clock/reset bulk() API   Marek Vasut
    • [PATCH 1/2] usb: host: ehci-generic: Make usage of clock/reset bulk() API   Patrice CHOTARD
• [PATCH] Makefile: Avoid non-portable GNU sed extension   Mark Kettenis
  • [PATCH] Makefile: Avoid non-portable GNU sed extension   Heinrich Schuchardt
    • [PATCH] Makefile: Avoid non-portable GNU sed extension   Mark Kettenis
      • [PATCH] Makefile: Avoid non-portable GNU sed extension   Heinrich Schuchardt
• [PATCH 0/3] Clarify standalone application support   Paul Barker
  • [PATCH 1/3] Licenses: Clarify exceptions for standalone apps   Paul Barker
    • [PATCH 1/3] Licenses: Clarify exceptions for standalone apps   Tom Rini
  • [PATCH 2/3] examples: hello_world: Drop inclusion of common header   Paul Barker
    • [PATCH 2/3] examples: hello_world: Drop inclusion of common header   Tom Rini
  • [PATCH 3/3] exports: Fix export of SPI access functions   Paul Barker
    • [PATCH 3/3] exports: Fix export of SPI access functions   Tom Rini
• [PATCH 4/7] sunxi: use boot source for determining environment location   Chris Morgan
• [PATCH] w1: w1-gpio: Loosen timings to improve cold boot reliability   Chris Morgan
• [PATCH v4 00/16] Add support for NVMEM API   Sean Anderson
  • [PATCH v4 01/16] sandbox: net: Add aliases for ethernet devices   Sean Anderson
  • [PATCH v4 02/16] sandbox: net: Add mac address for eth8 to environment   Sean Anderson
  • [PATCH v4 03/16] test: eth: Add test for ethernet addresses   Sean Anderson
  • [PATCH v4 04/16] sandbox: net: Remove fake-host-hwaddr   Sean Anderson
  • [PATCH v4 05/16] sandbox: Remove eth2addr from environment   Sean Anderson
  • [PATCH v4 06/16] sandbox: Move some mac addresses to device tree   Sean Anderson
  • [PATCH v4 07/16] net: dsa: Fix segmentation fault if master fails to probe   Sean Anderson
    • [PATCH v4 07/16] net: dsa: Fix segmentation fault if master fails to probe   Vladimir Oltean
  • [PATCH v4 08/16] misc: i2c_eeprom: Make i2c_eeprom_write use a const buf   Sean Anderson
  • [PATCH v4 09/16] misc: i2c_eeprom: Add fallbacks   Sean Anderson
  • [PATCH v4 10/16] misc: Add support for nvmem cells   Sean Anderson
  • [PATCH v4 11/16] sandbox: Enable NVMEM   Sean Anderson
  • [PATCH v4 12/16] net: Add support for reading mac addresses from nvmem cells   Sean Anderson
  • [PATCH v4 13/16] test: Load mac address with i2c eeprom   Sean Anderson
  • [PATCH v4 14/16] test: Load mac address using RTC   Sean Anderson
  • [PATCH v4 15/16] test: Load mac address using misc device   Sean Anderson
  • [PATCH v4 16/16] [RFC] misc: nvmem: Convert to using udevices   Sean Anderson
• [PATCH] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Adam Ford
  • [PATCH] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Tim Harvey
  • [PATCH] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Francesco Dolcini
    • [PATCH] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Adam Ford
• [PATCH v3 1/4] arm: nuvoton: Add support for Nuvoton NPCM750 BMC   Tom Rini
• [PATCH v3 2/4] clk: nuvoton: Add support for NPCM750   Tom Rini
• [PATCH v3 3/4] serial: npcm: Add support for Nuvoton NPCM SoCs   Tom Rini
• [PATCH v3 4/4] timer: npcm: Add NPCM timer support   Tom Rini
• [PATCH v1 1/1] gpio: npcm: Add support for Nuvoton NPCM SoCs   Tom Rini
• [PATCH v4 1/3] pinctrl: mediatek: rewrite mtk_pinconf_set and related functions   Tom Rini
• [PATCH v4 2/3] pinctrl: mediatek: introduce multiple memory bases support   Tom Rini
• [PATCH v4 3/3] pinctrl: mediatek: add support for different types of IO pins   Tom Rini
• [PATCH 1/2] test/py: Add a way to start sandbox without a device tree   Tom Rini
• [PATCH 2/2] sandbox: Avoid binman error when run without device tree   Tom Rini
• [PATCH] board: synquacer: developerbox: Remove Masami from MAINTAINERS   Tom Rini
• [PATCH v2] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Tom Rini
• [PATCH] include: configs: am**x/j721e/j721s2_evm.h: Move the stack pointer init address in arm64   Tom Rini
• [PATCH 1/1] tools: mkimage: set OPENSSL_API_COMPAT   Tom Rini
• [PATCH v3 0/9] spl: Use common function for loading/parsing images   Sean Anderson
  • [PATCH v3 1/9] spl: Add generic spl_load function   Sean Anderson
  • [PATCH v3 2/9] spl: Convert ext to use spl_load   Sean Anderson
  • [PATCH v3 3/9] spl: Convert fat to spl_load   Sean Anderson
    • [PATCH v3 3/9] spl: Convert fat to spl_load   Tom Rini
  • [PATCH v3 4/9] spl: Convert mmc to spl_load   Sean Anderson
    • [PATCH v3 4/9] spl: Convert mmc to spl_load   Tom Rini
  • [PATCH v3 5/9] spl: Convert net to spl_load   Sean Anderson
    • [PATCH v3 5/9] spl: Convert net to spl_load   Tom Rini
  • [PATCH v3 6/9] spl: Convert nor to spl_load   Sean Anderson
  • [PATCH v3 7/9] spl: Convert semihosting to spl_load   Sean Anderson
  • [PATCH v3 8/9] spl: Convert spi to spl_load   Sean Anderson
    • [PATCH v3 8/9] spl: Convert spi to spl_load   Tom Rini
      • [PATCH v3 8/9] spl: Convert spi to spl_load   Sean Anderson
  • [PATCH v3 9/9] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image   Sean Anderson
• [PATCH] RFC: net: fec: get rid of CONFIG_FEC_MXC_MDIO_BASE   Tim Harvey
  • [PATCH] RFC: net: fec: get rid of CONFIG_FEC_MXC_MDIO_BASE   Oleh Kravchenko
    • [PATCH] RFC: net: fec: get rid of CONFIG_FEC_MXC_MDIO_BASE   Tim Harvey
      • [PATCH] RFC: net: fec: get rid of CONFIG_FEC_MXC_MDIO_BASE   Anatolij Gustschin
  • [PATCH] RFC: net: fec: get rid of CONFIG_FEC_MXC_MDIO_BASE   Ramon Fried
• [PATCH] tools/imagetool: Fix segfault when tparams->verify_header is NULL   Tom Rini
• [PATCH] serial: smh: Check return value of strndup   Tom Rini
• [PATCH] lib/date: Make rtc_mktime and mktime64 Y2038-ready   Tom Rini
  • [PATCH] lib/date: Make rtc_mktime and mktime64 Y2038-ready   Tom Rini
• [PATCH 1/1] cmd: fix long text for fdt command   Tom Rini
• [PATCH 1/1] cmd: simplify do_adc_single()   Tom Rini
• [PATCH 1/1] cmd: onenand: fix printf codes   Tom Rini
• [PATCH v1] rtc: rv8803: fix off-by-one in month counting   Tom Rini
• [PATCH] tools: mkimage: Avoid ENODATA in host tools   Tom Rini
• [PATCH 1/1] clk: scmi: fix scmi_clk_get_attibute()   Tom Rini
• [PATCH] reset: Return 0 if ops unimplemented and remove empty functions   Tom Rini
• [PATCH] misc: fs_loader: Fix compile warnings when CONFIG_CMD_UBIFS is enabled   Tom Rini
• [PATCH 0/2] sunxi: clk: fix unhandled clocks warnings   Andre Przywara
  • [PATCH 1/2] clk: sunxi: add PIO bus gate clocks   Andre Przywara
    • [PATCH 1/2] clk: sunxi: add PIO bus gate clocks   Samuel Holland
    • [PATCH 1/2] clk: sunxi: add PIO bus gate clocks   Andre Przywara
  • [PATCH 2/2] clk: sunxi: add and use dummy gate clocks   Andre Przywara
    • [PATCH 2/2] clk: sunxi: add and use dummy gate clocks   Samuel Holland
    • [PATCH 2/2] clk: sunxi: add and use dummy gate clocks   Andre Przywara
• [PATCH] sunxi: board: Fix UART PortF pinmux setup   Andre Przywara
  • [PATCH] sunxi: board: Fix UART PortF pinmux setup   Samuel Holland
  • [PATCH] sunxi: board: Fix UART PortF pinmux setup   Andre Przywara
• [PATCH 01/12] dt-bindings: sunxi: Update clock/reset binding headers   Andre Przywara
• [PATCH 02/12] ARM: dts: sunxi: Remove unused devicetree headers   Andre Przywara
• [PATCH 03/12] ARM: dts: sun4i: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 04/12] ARM: dts: sun7i: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH RFC v2 00/11] Integration of sysfw, tispl and tiboot3   Neha Malcom Francis
  • [PATCH RFC v2 01/11] j721e_evm: schema: yaml: Add general schema and J721E board config files   Neha Malcom Francis
  • [PATCH RFC v2 02/11] ti: tools: config: Add board config class to generate config binaries   Neha Malcom Francis
  • [PATCH RFC v2 03/11] ti: etype: sysfw: Add entry type for sysfw   Neha Malcom Francis
    • [PATCH RFC v2 03/11] ti: etype: sysfw: Add entry type for sysfw   Roger Quadros
  • [PATCH RFC v2 04/11] ti: etype: dm: Add entry type for TI DM   Neha Malcom Francis
  • [PATCH RFC v2 05/11] ti: etype: x509: Add etype for x509 certificate for K3 devices   Neha Malcom Francis
    • [PATCH RFC v2 05/11] ti: etype: x509: Add etype for x509 certificate for K3 devices   Roger Quadros
  • [PATCH RFC v2 06/11] ti: sysfw: Add support for packaging sysfw.itb   Neha Malcom Francis
  • [PATCH RFC v2 07/11] ti: tiboot3.bin: Remove tiboot3.bin target from makefile   Neha Malcom Francis
    • [PATCH RFC v2 07/11] ti: tiboot3.bin: Remove tiboot3.bin target from makefile   Roger Quadros
  • [PATCH RFC v2 08/11] ti: tispl.bin: Removed script that packages tispl.bin   Neha Malcom Francis
    • [PATCH RFC v2 08/11] ti: tispl.bin: Removed script that packages tispl.bin   Roger Quadros
  • [PATCH RFC v2 09/11] ti: x509: Remove shell script used for signing   Neha Malcom Francis
    • [PATCH RFC v2 09/11] ti: x509: Remove shell script used for signing   Roger Quadros
  • [PATCH RFC v2 10/11] ti: dtsi: j721e: Use binman to package sysfw.itb and tiboot3.bin   Neha Malcom Francis
  • [PATCH RFC v2 11/11] ti: dtsi: j721e: Use binman to package tispl.bin   Neha Malcom Francis
    • [PATCH RFC v2 11/11] ti: dtsi: j721e: Use binman to package tispl.bin   Roger Quadros
  • [PATCH RFC v2 00/11] Integration of sysfw, tispl and tiboot3   Tom Rini
    • [PATCH RFC v2 00/11] Integration of sysfw, tispl and tiboot3   Alper Nebi Yasak
  • [PATCH RFC v2 00/11] Integration of sysfw, tispl and tiboot3   Roger Quadros
• [PATCH] arm64: versal: Add support to load an app at EL1   Ashok Reddy Soma
  • [PATCH] arm64: versal: Add support to load an app at EL1   Michal Simek
• [PATCH v2 1/2] usb: host: ehci-generic: Make usage of clock/reset bulk() API   Patrice Chotard
  • [PATCH v2 2/2] usb: host: ehci-generic: Remove DM_REGULATOR flag   Patrice Chotard
    • [PATCH v2 2/2] usb: host: ehci-generic: Remove DM_REGULATOR flag   Patrick DELAUNAY
  • [PATCH v2 1/2] usb: host: ehci-generic: Make usage of clock/reset bulk() API   Patrick DELAUNAY
• [PATCH 1/3] pinctrl: pinctrl_stm32: Update pinmux_mode definition   Patrick DELAUNAY
  • [PATCH 1/3] pinctrl: pinctrl_stm32: Update pinmux_mode definition   Patrice CHOTARD
• [PATCH 2/3] pinctrl: pinctrl_stm32: Use GPIOF_UNKNOWN to indicate not mapped pins   Patrick DELAUNAY
  • [PATCH 2/3] pinctrl: pinctrl_stm32: Use GPIOF_UNKNOWN to indicate not mapped pins   Patrice CHOTARD
• [PATCH 3/3] gpio: stm32_gpio: Rework GPIO hole management   Patrick DELAUNAY
  • [PATCH 3/3] gpio: stm32_gpio: Rework GPIO hole management   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 12/12] doc: Add documentation for STM32 MCUs   Patrick DELAUNAY
• [PATCH] phy: stm32-usbphyc: stm32-usbphyc: Add DT phy tuning support   Patrick DELAUNAY
  • [PATCH] phy: stm32-usbphyc: stm32-usbphyc: Add DT phy tuning support   Patrice CHOTARD
    • [PATCH] phy: stm32-usbphyc: stm32-usbphyc: Add DT phy tuning support   Patrice CHOTARD
      • [Uboot-stm32] [PATCH] phy: stm32-usbphyc: stm32-usbphyc: Add DT phy tuning support   Patrice CHOTARD
• [PATCH] board: st: stm32mp1: Consider USB cable connected when boot device is USB   Patrick DELAUNAY
  • [PATCH] board: st: stm32mp1: Consider USB cable connected when boot device is USB   Patrice CHOTARD
• [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART   Pali Rohár
  • [PATCH 1/5] arm: Add new config option ARCH_VERY_EARLY_INIT   Pali Rohár
    • [PATCH 1/5] arm: Add new config option ARCH_VERY_EARLY_INIT   Stefan Roese
  • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Pali Rohár
    • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Stefan Roese
      • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Pali Rohár
      • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Stefan Roese
      • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Stefan Roese
      • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Pali Rohár
    • [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function   Stefan Roese
  • [PATCH 3/5] serial: Add new config option SPL_DEBUG_UART_BASE   Pali Rohár
    • [PATCH 3/5] serial: Add new config option SPL_DEBUG_UART_BASE   Stefan Roese
  • [PATCH 4/5] serial: ns16550: Add support for SPL_DEBUG_UART_BASE   Pali Rohár
    • [PATCH 4/5] serial: ns16550: Add support for SPL_DEBUG_UART_BASE   Stefan Roese
  • [PATCH 5/5] arm: mvebu: turris_omnia: Fix DEBUG_UART_BASE   Pali Rohár
    • [PATCH 5/5] arm: mvebu: turris_omnia: Fix DEBUG_UART_BASE   Stefan Roese
      • [PATCH 5/5] arm: mvebu: turris_omnia: Fix DEBUG_UART_BASE   Pali Rohár
      • [PATCH 5/5] arm: mvebu: turris_omnia: Fix DEBUG_UART_BASE   Pali Rohár
    • [PATCH 5/5] arm: mvebu: turris_omnia: Fix DEBUG_UART_BASE   Stefan Roese
  • [PATCH 6/5] arm: mvebu: Fix DEBUG_UART_BASE for all 32-bit boards   Pali Rohár
    • [PATCH 6/5] arm: mvebu: Fix DEBUG_UART_BASE for all 32-bit boards   Stefan Roese
  • [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART   Stefan Roese
    • [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART   Pali Rohár
  • [PATCH 7/5] serial: Add new config option TPL_DEBUG_UART_BASE   Pali Rohár
    • [PATCH 7/5] serial: Add new config option TPL_DEBUG_UART_BASE   Stefan Roese
  • [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART   Stefan Roese
• [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error   Jaehoon Chung
  • [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error   Pali Rohár
  • [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error   Peng Fan (OSS)
    • [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error   Bough Chen
• Please pull u-boot-watchdog/master   Stefan Roese
  • Please pull u-boot-watchdog/master   Tom Rini
• [PATCH v2 1/1] tools: mkimage: set OPENSSL_API_COMPAT   Heinrich Schuchardt
  • [PATCH v2 1/1] tools: mkimage: set OPENSSL_API_COMPAT   Andre Przywara
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
  • [PULL] u-boot-usb/master   Marek Vasut
    • [PULL] u-boot-usb/master   Tom Rini
• [PATCH] mvebu: uDPU: include fixed-phy support   Robert Marko
  • [PATCH] mvebu: uDPU: include fixed-phy support   Robert Marko
  • [PATCH] mvebu: uDPU: include fixed-phy support   Stefan Roese
  • [PATCH] mvebu: uDPU: include fixed-phy support   Stefan Roese
• [PATCH 1/2 v4] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
  • [PATCH 1/2 v4] efi_loader: add sha384/512 on certificate revocation   Heinrich Schuchardt
    • [PATCH 1/2 v4] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [PATCH 2/2 v4] test/py: Add more test cases for rejecting an EFI image   Ilias Apalodimas
• [PATCH v5] board: purism: add the Purism Librem5 phone   Angus Ainslie
  • [PATCH v5] board: purism: add the Purism Librem5 phone   Stefano Babic
    • [PATCH v5] board: purism: add the Purism Librem5 phone   Angus Ainslie
      • [PATCH v5] board: purism: add the Purism Librem5 phone   Tom Rini
      • [PATCH v5] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH 00/16] stm32mp: add STM32MP13x support   Patrick Delaunay
  • [PATCH 03/16] arm: stm32mp: move the get_otp helper function in bsec   Patrick Delaunay
    • [PATCH 03/16] arm: stm32mp: move the get_otp helper function in bsec   Patrice CHOTARD
  • [PATCH 04/16] arm: stm32mp: move code for STM32MP15x   Patrick Delaunay
    • [PATCH 04/16] arm: stm32mp: move code for STM32MP15x   Patrice CHOTARD
  • [PATCH 05/16] arm: stm32mp: add choice for STM32MP SOC family   Patrick Delaunay
    • [PATCH 05/16] arm: stm32mp: add choice for STM32MP SOC family   Patrice CHOTARD
  • [PATCH 06/16] arm: stm32mp: add sub config Kconfig.15x   Patrick Delaunay
    • [PATCH 06/16] arm: stm32mp: add sub config Kconfig.15x   Patrice CHOTARD
  • [PATCH 07/16] arm: stm32mp: add CONFIG_STM32MP15_PWR   Patrick Delaunay
    • [PATCH 07/16] arm: stm32mp: add CONFIG_STM32MP15_PWR   Patrice CHOTARD
  • [PATCH 08/16] arm: stm32mp: add support of STM32MP13x   Patrick Delaunay
    • [PATCH 08/16] arm: stm32mp: add support of STM32MP13x   Patrice CHOTARD
      • [Uboot-stm32] [PATCH 08/16] arm: stm32mp: add support of STM32MP13x   Patrice CHOTARD
      • [Uboot-stm32] [PATCH 08/16] arm: stm32mp: add support of STM32MP13x   Marek Vasut
  • [PATCH 09/16] arm: stm32mp: support 2 MAC address for STM32MP13   Patrick Delaunay
    • [PATCH 09/16] arm: stm32mp: support 2 MAC address for STM32MP13   Patrice CHOTARD
  • [PATCH 10/16] pinctrl: stm32: add support of STM32MP135   Patrick Delaunay
    • [PATCH 10/16] pinctrl: stm32: add support of STM32MP135   Patrice CHOTARD
    • [PATCH 10/16] pinctrl: stm32: add support of STM32MP135   Patrice CHOTARD
  • [PATCH 11/16] board: stm32pm1: add stm32mp13 board support   Patrick Delaunay
    • [PATCH 11/16] board: stm32pm1: add stm32mp13 board support   Patrice CHOTARD
      • [PATCH 11/16] board: stm32pm1: add stm32mp13 board support   Patrick DELAUNAY
  • [PATCH 12/16] ram: stm32mp1: add support of STM32MP13x   Patrick Delaunay
    • [PATCH 12/16] ram: stm32mp1: add support of STM32MP13x   Patrice CHOTARD
  • [PATCH 13/16] mmc: stm32_sdmmc2: make reset property optional   Patrick Delaunay
    • [PATCH 13/16] mmc: stm32_sdmmc2: make reset property optional   Jaehoon Chung
    • [PATCH 13/16] mmc: stm32_sdmmc2: make reset property optional   Patrice CHOTARD
  • [PATCH 14/16] arm: dts: stm32mp: add stm32mp13 device tree for U-Boot   Patrick Delaunay
    • [PATCH 14/16] arm: dts: stm32mp: add stm32mp13 device tree for U-Boot   Patrice CHOTARD
  • [PATCH 15/16] configs: add stm32mp13 defconfig   Patrick Delaunay
    • [PATCH 15/16] configs: add stm32mp13 defconfig   Patrice CHOTARD
  • [PATCH 16/16] doc: st: stm32mp1: add STM32MP13x support   Patrick Delaunay
    • [PATCH 16/16] doc: st: stm32mp1: add STM32MP13x support   Patrice CHOTARD
      • [PATCH 16/16] doc: st: stm32mp1: add STM32MP13x support   Patrick DELAUNAY
• [PATCH 01/16] ARM: dts: stm32: add STM32MP13 SoCs support   Patrick Delaunay
  • [PATCH 01/16] ARM: dts: stm32: add STM32MP13 SoCs support   Patrice CHOTARD
• [PATCH 02/16] configs: stm32mp1: move SUPPORT_SPL in STM32MP15x   Patrick Delaunay
  • [PATCH 02/16] configs: stm32mp1: move SUPPORT_SPL in STM32MP15x   Patrice CHOTARD
• [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrice CHOTARD
  • [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Sean Anderson
    • [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrick DELAUNAY
      • [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Amelie Delaunay
      • [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Sean Anderson
      • [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrice CHOTARD
    • [Uboot-stm32] [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrice CHOTARD
• [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock   Patrice CHOTARD
  • [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock   Sean Anderson
    • [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock   Patrice CHOTARD
• [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC   Patrice CHOTARD
• [PATCH] arm: dts: stm32mp15: alignment with v5.18   Patrice CHOTARD
  • [Uboot-stm32] [PATCH] arm: dts: stm32mp15: alignment with v5.18   Patrice CHOTARD
• [PATCH V2 1/4] nand: raw: mxs_nand: Fix specific hook registration   Han Xu
• [PATCH V2 3/4] arm: mach-imx: cmd_nandbcb fix bad block handling   Han Xu
  • [PATCH V2 3/4] arm: mach-imx: cmd_nandbcb fix bad block handling   Michael Nazzareno Trimarchi
    • [PATCH V2 3/4] arm: mach-imx: cmd_nandbcb fix bad block handling   Tim Harvey
• [PATCH 4/4] spl: spl_nand: Fix bad block handling in fitImage   Han Xu
• [PATCH v2] efi_loader: Improve console screen clearing and reset   Jan Kiszka
  • [PATCH v2] efi_loader: Improve console screen clearing and reset   Heinrich Schuchardt
    • [PATCH v2] efi_loader: Improve console screen clearing and reset   Jan Kiszka
      • [PATCH v2] efi_loader: Improve console screen clearing and reset   Jan Kiszka
• [PATCH] ARM: imx: Fix parsing of ROM log event IDs on iMX8M   Fedor Ross
• [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
  • [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Mark Kettenis
    • Re: [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
      • [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Masahisa Kojima
      • [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
• [PATCH 1/2] pinctrl: probe pinctrl drivers during post-bind   Robert Marko
  • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Robert Marko
    • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Pali Rohár
      • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Robert Marko
      • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Pali Rohár
    • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Stefan Roese
      • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Robert Marko
      • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Stefan Roese
      • [PATCH 2/2] arm: mvebu: add support for Methode eDPU   Robert Marko
  • [PATCH 1/2] pinctrl: probe pinctrl drivers during post-bind   Pali Rohár
  • [PATCH 1/2] pinctrl: probe pinctrl drivers during post-bind   Stefan Roese
  • [PATCH 1/2] pinctrl: probe pinctrl drivers during post-bind   Stefan Roese
• [PATCH v2 0/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
  • [PATCH v2 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
    • [PATCH v2 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   Tom Rini
      • [PATCH v2 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
• [PATCH] phy: adin: fix broken support for adi,phy-mode-override   Nate Drude
  • [PATCH] phy: adin: fix broken support for adi,phy-mode-override   Josua Mayer
• [PATCH 0/7] arm64: binman: use binman symbols for imx   Peng Fan (OSS)
  • [PATCH 1/7] spl: guard u_boot_any with X86   Peng Fan (OSS)
    • [PATCH 1/7] spl: guard u_boot_any with X86   Tom Rini
  • [PATCH 2/7] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
  • [PATCH 3/7] armv8: u-boot-spl.lds: mark __image_copy_start as symbol   Peng Fan (OSS)
  • [PATCH 4/7] binman_sym: update symbol alignment to 8 bytes   Peng Fan (OSS)
  • [PATCH 5/7] tools: binman: section: replace @ with -   Peng Fan (OSS)
  • [PATCH 6/7] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
  • [PATCH 7/7] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
  • [PATCH 0/7] arm64: binman: use binman symbols for imx   Michael Nazzareno Trimarchi
  • [PATCH 0/7] arm64: binman: use binman symbols for imx   Tom Rini
  • [PATCH 0/7] arm64: binman: use binman symbols for imx   Tim Harvey
• [PATCH] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Peng Fan (OSS)
• [PATCH V2 0/7] arm64: binman: use binman symbols for imx   Peng Fan (OSS)
  • [PATCH V2 1/7] spl: guard u_boot_any with X86   Peng Fan (OSS)
  • [PATCH V2 2/7] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
  • [PATCH V2 3/7] armv8: u-boot-spl.lds: mark __image_copy_start as symbol   Peng Fan (OSS)
  • [PATCH V2 4/7] tools: binman: section: replace @ with -   Peng Fan (OSS)
    • [PATCH V2 4/7] tools: binman: section: replace @ with -   Tom Rini
  • [PATCH V2 5/7] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
    • [PATCH V2 5/7] ddr: imx8m: helper: load ddr firmware according to binman symbols   Tim Harvey
      • [PATCH V2 5/7] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
  • [PATCH V2 6/7] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
  • [PATCH V2 7/7] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Peng Fan (OSS)
    • [PATCH V2 7/7] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Tom Rini
• [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Adam Ford
  • [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Marek Vasut
    • [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Adam Ford
      • [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Marek Vasut
      • [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Francesco Dolcini
  • [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Andrejs Cainikovs
    • [PATCH V2] ARM: imx: imx8m: Adjust thermal trip points for Industrial parts   Andrejs Cainikovs
    • [PATCH] imx8m: fixup thermal trips   Andrejs Cainikovs
      • [PATCH] imx8m: fixup thermal trips   Adam Ford
      • [PATCH] imx8m: fixup thermal trips   Andrejs Cainikovs
      • [PATCH] imx8m: fixup thermal trips   Adam Ford
      • [PATCH] imx8m: fixup thermal trips   Andrejs Cainikovs
      • [PATCH] imx8m: fixup thermal trips   Adam Ford
      • [PATCH] imx8m: fixup thermal trips   Andrejs Cainikovs
• [PATCH 1/1] cmd/sbi: add implementation ID 6 - Coffer   Heinrich Schuchardt
  • [PATCH 1/1] cmd/sbi: add implementation ID 6 - Coffer   Leo Liang
• [PATCH] boot: image-pre-load: drop unused CONFIG_SYS_BOOTM_LEN   Peng Fan (OSS)
  • [PATCH] boot: image-pre-load: drop unused CONFIG_SYS_BOOTM_LEN   Tom Rini
• [UNTESTED PATCH] Nokia RX-51: Convert to CONFIG_DM_SERIAL   Merlijn Wajer
  • [UNTESTED PATCH] Nokia RX-51: Convert to CONFIG_DM_SERIAL   Tom Rini
  • [UNTESTED PATCH] Nokia RX-51: Convert to CONFIG_DM_SERIAL   Merlijn Wajer
  • [UNTESTED PATCH] Nokia RX-51: Convert to CONFIG_DM_SERIAL   Tom Rini
• Nokia RX51 U-Boot USB support updates?   Merlijn Wajer
  • Nokia RX51 U-Boot USB support updates?   Tom Rini
• [PATCH v2 1/1] dm: fix DM_EVENT dependencies   Heinrich Schuchardt
• [PATCH 1/1] Makefile: support CROSS_COMPILE=armv7a-*   Heinrich Schuchardt
  • [PATCH 1/1] Makefile: support CROSS_COMPILE=armv7a-*   Marek Behún
• [PATCH] ARM: imx: mx5: Convert MX53 Menlo board to DM I2C and DM RTC   Marek Vasut
  • [PATCH] ARM: imx: mx5: Convert MX53 Menlo board to DM I2C and DM RTC   sbabic at denx.de
• Pull request for efi-2022-07-rc3-2   Heinrich Schuchardt
  • Pull request for efi-2022-07-rc3-2   Tom Rini
• [PATCH] cmd: dm: migrate dm command to use U_BOOT_CMD_WITH_SUBCMDS()   Ovidiu Panait
• [PATCH 0/9] dm: core: Support collecting and reporting stats   Simon Glass
  • [PATCH 1/9] dm: core: Rename dm_dump_all()   Simon Glass
  • [PATCH 2/9] dm: core: Sort dm subcommands   Simon Glass
  • [PATCH 3/9] dm: core: Fix addresses in the dm static command   Simon Glass
  • [PATCH 4/9] dm: core: Add documentation for the dm command   Simon Glass
  • [PATCH 5/9] dm: core: Switch the testbus driver to use a new struct   Simon Glass
  • [PATCH 6/9] dm: core: Support accessing core tags   Simon Glass
    • [PATCH 6/9] dm: core: Support accessing core tags   AKASHI Takahiro
  • [PATCH 7/9] dm: core: Add a way to collect memory usage   Simon Glass
  • [PATCH 8/9] dm: core: Add a command to show driver model statistics   Simon Glass
  • [PATCH 9/9] dm: spl: Allow SPL to show memory usage   Simon Glass
• [PATCH 1/1] add support for mws4 board   Marian Ulbricht
  • [PATCH 1/1] add support for mws4 board   Tom Rini
    • [PATCH 1/1 v2] add support for mws4 board   Marian Ulbricht
      • [PATCH 1/1 v2] add support for mws4 board   Tom Rini
• [PATCH v1 00/17] Add rk3066 ADC and USB support   Johan Jonker
  • [PATCH v1 01/17] rockchip: spl: fix reloc gd and FDT blob pointer   Johan Jonker
  • [PATCH v1 02/17] rockchip: spl: allow more boot devices   Johan Jonker
  • [PATCH v1 03/17] rockchip: spl-boot-order: add usb boot option   Johan Jonker
  • [PATCH v1 04/17] rockchip: board: allow spl compile for usb init functions   Johan Jonker
  • [PATCH v1 05/17] rockchip: usb: gadget: rockusb: enable spl compile   Johan Jonker
  • [PATCH v1 06/17] rockchip: configs: mk808: add spl usb configs   Johan Jonker
  • [PATCH v1 07/17] arm: dts: rockchip: mk808: add adc usb required properties for spl   Johan Jonker
  • [PATCH v1 08/17] rockchip: adc: enable spl compile class driver   Johan Jonker
  • [PATCH v1 09/17] rockchip: adc: reduce error notifications from class driver   Johan Jonker
  • [PATCH v1 10/17] rockchip: adc: enable spl compile rockchip-saradc driver   Johan Jonker
  • [PATCH v1 11/17] rockchip: adc: fix adc timer   Johan Jonker
  • [PATCH v1 12/17] rockchip: adc: fix the hangups   Johan Jonker
  • [PATCH v1 13/17] rockchip: adc: make adc branch compile in SPL   Johan Jonker
  • [PATCH v1 14/17] rockchip: adc: move config items in a sub menu   Johan Jonker
  • [PATCH v1 15/17] rockchip: rk3066: config nand data pins in spl   Johan Jonker
  • [PATCH v1 16/17] rockchip: rk3066: add recovery mode in spl   Johan Jonker
  • [PATCH v1 17/17] rockchip: configs: mk808: enable usb support   Johan Jonker
• Bug in p1_p2_rdb_pc? Caching-inhibited bit for initial L2 SRAM entry in TLB   Pali Rohár
  • Bug in p1_p2_rdb_pc? Caching-inhibited bit for initial L2 SRAM entry in TLB   Sinan Akman
• [PATCH] devres: Use the correct devres implementation in SPL builds   Tom Rini
  • [PATCH] devres: Use the correct devres implementation in SPL builds   Bedel, Alban
• [PATCH] fdt: don't set linux,phandle   Tom Rini
• [PATCH 1/3] disk: part_efi: add support to repair gpt table   Tom Rini
• [PATCH 2/3] cmd: gpt: add subcommand repair   Tom Rini
• [PATCH 3/3] test: py: tests: test_gpt.py: add a simple test for the command gpt repair   Tom Rini
• [PATCH 0/2] dts: imx8mp-rsb3720: modify configrations to load fip into memory   Ying-Chun Liu
  • [PATCH 1/2] dts: imx8mp: assign binman_configuration node name to config-SEQ   Ying-Chun Liu
  • [PATCH 2/2] dts: imx8mp-rsb3720: modify configrations to load fip into memory   Ying-Chun Liu
• [PATCH 1/2] sunxi: Remove obsolete Kconfig selections   Samuel Holland
  • [PATCH 2/2] serial: Remove obsolete CONS_INDEX_n Kconfig options   Samuel Holland
    • [PATCH 2/2] serial: Remove obsolete CONS_INDEX_n Kconfig options   Tom Rini
    • [PATCH 2/2] serial: Remove obsolete CONS_INDEX_n Kconfig options   Andre Przywara
    • [PATCH 2/2] serial: Remove obsolete CONS_INDEX_n Kconfig options   Andre Przywara
  • [PATCH 1/2] sunxi: Remove obsolete Kconfig selections   Andre Przywara
  • [PATCH 1/2] sunxi: Remove obsolete Kconfig selections   Andre Przywara
• [PATCH 1/1] Add mmc_set_env_dev to TI AM33xx, using the scratch reg of UART port   Da Shi Cao
  • [PATCH 1/1] Add mmc_set_env_dev to TI AM33xx, using the scratch reg of UART port   Tom Rini
• [PATCH 1/1] test: fix some pylint problems in test_capsule_firmware_raw.py   AKASHI Takahiro
• [PATCH 0/7] clk: sunxi: Out-of-bounds access fix and driver cleanup   Samuel Holland
  • [PATCH 1/7] clk: sunxi: Store the array sizes in the CCU descriptor   Samuel Holland
  • [PATCH 2/7] clk: sunxi: Prevent out-of-bounds gate array access   Samuel Holland
  • [PATCH 3/7] reset: sunxi: Get the reset count from the CCU descriptor   Samuel Holland
  • [PATCH 4/7] clk: sunxi: Use a single driver for all variants   Samuel Holland
  • [PATCH 5/7] clk: sunxi: Convert driver private data to platform data   Samuel Holland
  • [PATCH 6/7] reset: sunxi: Convert driver private data to platform data   Samuel Holland
  • [PATCH 7/7] reset: sunxi: Reuse the platform data from the clock driver   Samuel Holland
  • [PATCH 0/7] clk: sunxi: Out-of-bounds access fix and driver cleanup   Andre Przywara
  • [PATCH 0/7] clk: sunxi: Out-of-bounds access fix and driver cleanup   Sean Anderson
• [PATCH] efi_loader: disk: allow blk devices even without UCLASS_PARTITION   AKASHI Takahiro
  • [PATCH] efi_loader: disk: allow blk devices even without UCLASS_PARTITION   AKASHI Takahiro
• [PATCH 0/9] j721e: Add HyperFlash boot support   Vaishnav Achath
  • [PATCH 1/9] arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node   Vaishnav Achath
  • [PATCH 2/9] arm: dts: k3-j721e-som-p0: Add HyperFlash node   Vaishnav Achath
  • [PATCH 3/9] arm: dts: k3-j721e-r5-common-proc-board: Add HyperFlash node   Vaishnav Achath
  • [PATCH 4/9] arm: dts: k3-j721e-common-proc-board-u-boot: enable HyperFlash in SPL   Vaishnav Achath
  • [PATCH 5/9] arm: dts: k3-j721e-common-proc-board: enable hyperflash mux sel GPIO   Vaishnav Achath
  • [PATCH 6/9] arm: k3: sysfw-loader: add hyperflash support   Vaishnav Achath
  • [PATCH 7/9] configs: j721e_evm.h: define CONFIG_SYS_FLASH_BASE   Vaishnav Achath
  • [PATCH 8/9] ti: j721e: enable hyperflash spl fixup for j721e   Vaishnav Achath
  • [PATCH 9/9] configs: j721e_evm_defconfig: Add HBMC related configs   Vaishnav Achath
• [PATCH 0/2] Add support for dynamic overriding of default SF bus   Vaishnav Achath
  • [PATCH 1/2] common: spl: spl_spi: add support for dynamic detection of sf bus   Vaishnav Achath
  • [PATCH 2/2] arm: k3: j721e: enable dynamic sf bus detect support for j721e   Vaishnav Achath
• [PATCH 1/2] common: spl: spl_spi: add support for dynamic detection of sf bus   Heiko Schocher
  • [EXTERNAL] Re: [PATCH 1/2] common: spl: spl_spi: add support for dynamic detection of sf bus   Vaishnav Achath
• [PATCH v2 00/11] Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [PATCH v2 03/11] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [PATCH v2 04/11] configs: aspeed: Enable SPI flash features   Chin-Ting Kuo
  • [PATCH v2 05/11] MAINTAINERS: Add ASPEED SPI driver file   Chin-Ting Kuo
  • [PATCH v2 06/11] arm: dts: aspeed: Update SPI flash node settings   Chin-Ting Kuo
  • [PATCH v2 07/11] spi-mem: Add dirmap API from Linux   Chin-Ting Kuo
    • [PATCH v2 07/11] spi-mem: Add dirmap API from Linux   Sean Anderson
      • [PATCH v2 07/11] spi-mem: Add dirmap API from Linux   Chin-Ting Kuo
  • [PATCH v2 08/11] mtd: spi-nor: Use spi-mem dirmap API   Chin-Ting Kuo
  • [PATCH v2 09/11] spi: aspeed: SPI dirmap read support   Chin-Ting Kuo
  • [PATCH v2 10/11] configs: aspeed: Enable CONFIG_SPI_DIRMAP   Chin-Ting Kuo
  • [PATCH v2 11/11] mtd: spi-nor-ids: Add Winbond W25Q512JV ID   Chin-Ting Kuo
• [PATCH v2 01/11] clk: aspeed: Get HCLK frequency support   Chin-Ting Kuo
  • [PATCH v2 01/11] clk: aspeed: Get HCLK frequency support   Cédric Le Goater
    • [PATCH v2 01/11] clk: aspeed: Get HCLK frequency support   Chin-Ting Kuo
• [PATCH v2 02/11] pinctrl: aspeed: FWSPICS1 and SPI1CS1 pin support   Chin-Ting Kuo
  • [PATCH v2 02/11] pinctrl: aspeed: FWSPICS1 and SPI1CS1 pin support   Cédric Le Goater
• [u-boot PATCH 0/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Roger Quadros
  • [u-boot PATCH 1/3] tools: binman: add ti-secure entry type   Roger Quadros
  • [u-boot PATCH 2/3] tools/fdtgrep: Include __symbols__ table   Roger Quadros
  • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Roger Quadros
    • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Andrew Davis
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Roger Quadros
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Andrew Davis
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Roger Quadros
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Tom Rini
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Alper Nebi Yasak
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Roger Quadros
      • [u-boot PATCH 3/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Andrew Davis
  • [u-boot PATCH 0/3] k3-am642-evm-u-boot: Use binman to generate u-boot.img and tispl.bin   Tom Rini
• [PATCH] fpga: intel_sdm_mb: Add checking for INTEL_SIP_SMC_STATUS_BUSY (1)   dinesh.maniyam at intel.com
  • [PATCH] fpga: intel_sdm_mb: Add checking for INTEL_SIP_SMC_STATUS_BUSY (1)   Chee, Tien Fong
    • [PATCH] fpga: intel_sdm_mb: Add checking for INTEL_SIP_SMC_STATUS_BUSY (1)   Maniyam, Dinesh
  • [PATCH v2] fpga: intel_sdm_mb: Add checking for INTEL_SIP_SMC_STATUS_BUSY (1)   dinesh.maniyam at intel.com
    • [PATCH v3] fpga: intel_sdm_mb: Add checking for INTEL_SIP_SMC_STATUS_BUSY (1)   dinesh.maniyam at intel.com
• [PATCH v5 16/17] bootmenu: add removable media entries   Masahisa Kojima
  • [PATCH v5 16/17] bootmenu: add removable media entries   Heinrich Schuchardt
    • [PATCH v5 16/17] bootmenu: add removable media entries   Masahisa Kojima
• [PATCH v5 07/17] bootmenu: flush input buffer before waiting user key input   Masahisa Kojima
• [PATCH] spl: spl_spi: add spi_nor_remove() to soft reset flash   Vaishnav Achath
• [PATCH] arm: mvebu: turris_{omnia,mox}: Enable CONFIG_NETCONSOLE   Pali Rohár
  • [PATCH] arm: mvebu: turris_{omnia,mox}: Enable CONFIG_NETCONSOLE   Stefan Roese
  • [PATCH] arm: mvebu: turris_{omnia,mox}: Enable CONFIG_NETCONSOLE   Stefan Roese
• [PATCH v2 0/6] introduce Arm FF-A support   Abdellatif El Khlifi
  • [PATCH v2 0/6] introduce Arm FF-A support   Abdellatif El Khlifi
    • [PATCH v2 0/6] introduce Arm FF-A support   Ilias Apalodimas
• [PATCH] HSD #1508031235-1: Override udelay for secure section   Marek Vasut
• [PATCH] meson: axg: search dtb for meson-axg-usb-ctrl on board axg   Sergei Antonov
  • [PATCH] meson: axg: search dtb for meson-axg-usb-ctrl on board axg   Neil Armstrong
  • [PATCH] meson: axg: search dtb for meson-axg-usb-ctrl on board axg   Neil Armstrong
• [PATCH v2 1/2] pmic: pca9450: Add upstream regulators subnode match   Marek Vasut
• [PATCH][RESEND] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
  • [PATCH][RESEND] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
  • [PATCH][RESEND] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Tudor.Ambarus at microchip.com
  • [PATCH][RESEND] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Jagan Teki
• [PATCH] Nokia RX-51: Enable CONFIG_SUPPORT_RAW_INITRD   Pali Rohár
  • [PATCH] Nokia RX-51: Enable CONFIG_SUPPORT_RAW_INITRD   Tom Rini
• Standalone application development   Paul Barker
• [PATCH] misc: Port USB251xB/xBi Hi-Speed Hub Controller Driver from Linux   Marek Vasut
• [PATCH 1/2] stm32mp: fdt: update etzpc for STM32MP15x   Patrick Delaunay
  • [PATCH 2/2] stm32mp: fdt: update etzpc for STM32MP13x   Patrick Delaunay
    • [PATCH 2/2] stm32mp: fdt: update etzpc for STM32MP13x   Patrice CHOTARD
  • [PATCH 1/2] stm32mp: fdt: update etzpc for STM32MP15x   Patrice CHOTARD
• [PATCH] armv8: Fix TCR 64-bit writes   Andre Przywara
  • [PATCH] armv8: Fix TCR 64-bit writes   Peng Fan
    • [PATCH] armv8: Fix TCR 64-bit writes   Peter Collingbourne
• [PATCH v3 0/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
  • [PATCH v3 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   William Zhang
    • [PATCH v3 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC   Philippe REYNES
• [ANN] U-Boot v2022.07-rc2 released   Tom Rini
  • [ANN] U-Boot v2022.07-rc2 released   Pali Rohár
    • [ANN] U-Boot v2022.07-rc2 released   Tom Rini
      • [ANN] U-Boot v2022.07-rc2 released   Pali Rohár
• [PATCH 1/2] toradex: tdx-cfg-block: add new 8gb apalis-imx8   Philippe Schenker
  • [PATCH 2/2] board: apalis-imx8: add new 8gb product variant   Philippe Schenker
    • [PATCH 2/2] board: apalis-imx8: add new 8gb product variant   Marcel Ziswiler
    • [PATCH 2/2] board: apalis-imx8: add new 8gb product variant   Marcel Ziswiler
  • [PATCH 1/2] toradex: tdx-cfg-block: add new 8gb apalis-imx8   Marcel Ziswiler
  • [PATCH 1/2] toradex: tdx-cfg-block: add new 8gb apalis-imx8   Marcel Ziswiler
    • [PATCH 1/2] toradex: tdx-cfg-block: add new 8gb apalis-imx8   Stefano Babic
• [PATCH 1/1] test: fix pylint warnings in test_efi_selftest.py   Heinrich Schuchardt
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH v5 32/34] bootstd: Add setup for the bootflow tests   Heinrich Schuchardt
• [PATCH] SPL: Do not allow enabling SPL symbols for non-SPL builds   Pali Rohár
  • [PATCH] SPL: Do not allow enabling SPL symbols for non-SPL builds   Tom Rini
    • [PATCH] SPL: Do not allow enabling SPL symbols for non-SPL builds   Pali Rohár
      • [PATCH] SPL: Do not allow enabling SPL symbols for non-SPL builds   Tom Rini
  • [PATCH v2] SPL: Do not allow enabling SPL symbols for non-SPL builds   Pali Rohár
• [PATCH 1/1] disk: incorrect message in is_gpt_valid()   Heinrich Schuchardt
• [PATCH 1/2] test: restore timeout after bootmenu unit test   Heinrich Schuchardt
  • [PATCH 2/2] test: don't change console timeout in EFI selftest.   Heinrich Schuchardt
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rob Herring
• [PATCH 1/4] power: add driver for the TPS65219 PMIC   Tom Rini
  • [PATCH 1/4] power: add driver for the TPS65219 PMIC   Jaehoon Chung
• [PATCH 2/4] regulator: add driver for the TPS65219 BUCK & LDO regulators   Tom Rini
• [PATCH 3/4] config: enable TPS65219 for am64x_evm_a53 boards   Tom Rini
• [PATCH 4/4] ARM: dts: k3-am642-sk-u-boot: add PMIC node   Tom Rini
• [PATCH] doc: regulator: Add regulator-force-boot-off binding   Chris Packham
• [PATCH] doc: Add device-tree-bindings for atsha204 and atsha204a   Heiko Schocher
  • [PATCH] doc: Add device-tree-bindings for atsha204 and atsha204a   Heiko Schocher
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Heiko Schocher
  • [PATCH] misc: atsha204a: Add support for atsha204 chip   Heiko Schocher
• [PATCH] ddr:altera:soc64: Integer fix overflow that caused DDR size mismatched   dinesh.maniyam at intel.com
  • [PATCH v2] ddr: altera: soc64: Integer fix overflow that caused DDR size mismatched   dinesh.maniyam at intel.com
• [PATCH] arm:socfpga:soc64: To notify SDM when U-Boot pass control to Linux   dinesh.maniyam at intel.com
  • [PATCH v2] arm: socfpga: soc64: To notify SDM when U-Boot pass control to Linux   dinesh.maniyam at intel.com
• [PATCH 1/8] stm32mp: stm32prog: fix comment   Patrice CHOTARD
• [PATCH 2/8] stm32mp: stm32prog: add CONFIG_CMD_STM32PROG_OTP   Patrice CHOTARD
• [PATCH 3/8] stm32mp: stm32prog: add TEE support in stm32prog command   Patrice CHOTARD
• [PATCH 4/8] stm32mp: stm32prog: add support of STM32IMAGE version 2   Patrice CHOTARD
• [PATCH 5/8] stm32mp: stm32prog: add support of UUID for FIP partition   Patrice CHOTARD
• [PATCH 6/8] stm32mp: stm32prog: handle interruption during the first enumeration   Patrice CHOTARD
• [PATCH 7/8] stm32mp: stm32prog: handle U-Boot script in flashlayout alternate   Patrice CHOTARD
• [PATCH 8/8] stm32mp: stm32prog: handle flashlayout without STM32 image header   Patrice CHOTARD
• [PATCH] video: stm32: stm32_ltdc: fix data enable polarity   Patrice CHOTARD
• [PATCH] video: stm32: stm32_ltdc: support several hardware versions   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: st: common: fix the error messages in stboard command   Patrice CHOTARD
• [PATCH 1/2] configs: stm32mp1: set the console variable for extlinux.conf   Patrice CHOTARD
• [PATCH 2/2] configs: stm32mp1: Add support for baudrates higher than 115200 for st-link   Patrice CHOTARD
• [PATCH] ARM: stm32mp: skip ft_system_setup when the soc node is absent   Patrice CHOTARD
  • [PATCH] ARM: stm32mp: skip ft_system_setup when the soc node is absent   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: stm32mp: correctly handle Silicon revision   Patrice CHOTARD
• [PATCH v2] ram: stm32mp1: Conditionally enable ASR   Patrice CHOTARD
• [PATCH v2] stm32mp: psci: Retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend   Patrice CHOTARD
• [PATCH 0/4] stm32mp: add minimal RCC support for STM32MP13   Patrick Delaunay
  • [PATCH 1/4] clk: Add directory for STM32 clock drivers   Patrick Delaunay
    • [PATCH 1/4] clk: Add directory for STM32 clock drivers   Sean Anderson
  • [PATCH 3/4] misc: stm32mp13: introduce STM32MP13 RCC driver   Patrick Delaunay
  • [PATCH 4/4] ARM: dts: stm32: add rcc node for STM32MP13   Patrick Delaunay
  • [PATCH 0/4] stm32mp: add minimal RCC support for STM32MP13   Sean Anderson
    • [PATCH 0/4] stm32mp: add minimal RCC support for STM32MP13   Patrick DELAUNAY
      • [PATCH 0/4] stm32mp: add minimal RCC support for STM32MP13   Sean Anderson
• [PATCH 2/4] clk: stm32mp13: add a STM32MP13 RCC clock driver   Patrick Delaunay
  • [Uboot-stm32] [PATCH 2/4] clk: stm32mp13: add a STM32MP13 RCC clock driver   Grzegorz Szymaszek
• [PATCH v2 01/12] configs: stm32f746-disco: Concatenate spl and u-boot binaries   Patrice CHOTARD
• [PATCH v2 02/12] configs: stm32f746-disco: Rename stm32f746-disco_defconfig to stm32f746-disco_spl_defconfig   Patrice CHOTARD
• [PATCH v2 03/12] configs: stm32f746-disco: Add stm32f746-disco_defconfig   Patrice CHOTARD
• [PATCH v2 04/12] configs: stm32f769-disco: Rename stm32f769-disco_defconfig to stm32f769-disco_spl_defconfig   Patrice CHOTARD
• [PATCH v2 05/12] configs: stm32f769-disco: Add stm32f769-disco_defconfig   Patrice CHOTARD
• [PATCH v2 06/12] configs: stm32f769-disco: Migrate SPL flags to defconfig   Patrice CHOTARD
• [PATCH v2 07/12] configs: stm32f746-disco: Migrate SPL flags to defconfig   Patrice CHOTARD
• [PATCH v2 08/12] board: stm32f746-disco: Fix dram_init() in none SPL config   Patrice CHOTARD
• [PATCH v2 09/12] configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile   Patrice CHOTARD
• [PATCH v2 10/12] configs: stm32746g-eval: Add stm32746g-eval_defconfig   Patrice CHOTARD
• [PATCH v2 11/12] configs: stm32746g-eval: Add stm32746g-eval_spl_defconfig   Patrice CHOTARD
• [PATCH v2 12/12] doc: Add documentation for STM32 MCUs   Patrice CHOTARD
• [PATCH] i2c: ihs: intel: Fix typo in comments (actual)   Heiko Schocher
• [PATCH] efi_loader: fix a problem in loading an image from a short-path   AKASHI Takahiro
• [PATCH] ls1028a: hdp: Add config support for HDP firmware loading   Yangbo Lu
  • [PATCH] ls1028a: hdp: Add config support for HDP firmware loading   Michael Walle
    • [PATCH] ls1028a: hdp: Add config support for HDP firmware loading   Vladimir Oltean
      • [PATCH] ls1028a: hdp: Add config support for HDP firmware loading   Michael Walle
• [PATCH 0/3] xilinx: Swith platforms to DM_ETH_PHY   Michal Simek
  • [PATCH 1/3] net: xilinx: axi_emac: Use shared MDIO bus support for axi emac driver   Michal Simek
    • [PATCH 1/3] net: xilinx: axi_emac: Use shared MDIO bus support for axi emac driver   Ramon Fried
  • [PATCH 2/3] net: xilinx: axi_emaclite: Use shared MDIO bus support for axi emaclite driver   Michal Simek
    • [PATCH 2/3] net: xilinx: axi_emaclite: Use shared MDIO bus support for axi emaclite driver   Ramon Fried
  • [PATCH 3/3] xilinx: Add CONFIG_DM_ETH_PHY config   Michal Simek
  • [PATCH 0/3] xilinx: Swith platforms to DM_ETH_PHY   Ashok Reddy Soma
  • [PATCH 0/3] xilinx: Swith platforms to DM_ETH_PHY   Michal Simek
• [PATCH v4 00/25] Add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 01/25] mips: add asm/mipsmtregs.h for MIPS multi-threading   Weijie Gao
  • [PATCH v4 02/25] mips: add more definitions for asm/cm.h   Weijie Gao
  • [PATCH v4 03/25] mips: add __image_copy_len for SPL linker script   Weijie Gao
  • [PATCH v4 04/25] mips: add support for noncached_alloc()   Weijie Gao
  • [PATCH v4 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
    • [PATCH v4 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Sean Anderson
      • [PATCH v4 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 06/25] mips: mtmips: add two reference boards for mt7621   Weijie Gao
    • [PATCH v4 06/25] mips: mtmips: add two reference boards for mt7621   Stefan Roese
  • [PATCH v4 07/25] doc: mediatek: add documentation for mt7621 reference boards   Weijie Gao
  • [PATCH v4 08/25] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Weijie Gao
    • [PATCH v4 08/25] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Sean Anderson
      • [PATCH v4 08/25] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 09/25] reset: mtmips: add reset controller support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 10/25] pinctrl: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 11/25] usb: xhci-mtk: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 12/25] phy: mtk-tphy: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 13/25] spi: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 14/25] gpio: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 15/25] watchdog: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 16/25] mmc: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 17/25] net: mediatek: remap iobase address   Weijie Gao
    • [PATCH v4 17/25] net: mediatek: remap iobase address   Ramon Fried
  • [PATCH v4 18/25] net: mediatek: use regmap api to modify ethsys registers   Weijie Gao
    • [PATCH v4 18/25] net: mediatek: use regmap api to modify ethsys registers   Ramon Fried
  • [PATCH v4 19/25] net: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
    • [PATCH v4 19/25] net: mediatek: add support for MediaTek MT7621 SoC   Ramon Fried
  • [PATCH v4 20/25] nand: raw: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v4 21/25] spl: allow using nand base without standard nand driver   Weijie Gao
  • [PATCH v4 22/25] spl: spl_legacy: fix the use of SPL_COPY_PAYLOAD_ONLY   Weijie Gao
  • [PATCH v4 23/25] spl: nand: support loading legacy image with payload compressed   Weijie Gao
  • [PATCH v4 24/25] tools: mtk_image: add support for MT7621 NAND images   Weijie Gao
  • [PATCH v4 25/25] MAINTAINERS: update maintainer for MediaTek MIPS platform   Weijie Gao
• [PATCH] usb: xhci-dwc3: Support role switch default role   Mark Kettenis
• [PATCH] phy: zynqmp: Increase timeout value to 10ms   Ashok Reddy Soma
  • [PATCH] phy: zynqmp: Increase timeout value to 10ms   Michal Simek
• How not to have uboot env partition on SPI flash?   Gangadhar N
  • How not to have uboot env partition on SPI flash?   Sean Anderson
    • How not to have uboot env partition on SPI flash?   Gangadhar N
• [PATCH V3 0/7] arm64: binman: use binman symbols for imx   Peng Fan (OSS)
  • [PATCH V3 1/7] spl: guard u_boot_any with X86   Peng Fan (OSS)
  • [PATCH V3 2/7] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
  • [PATCH V3 3/7] armv8: u-boot-spl.lds: mark __image_copy_start as symbol   Peng Fan (OSS)
  • [PATCH V3 4/7] tools: binman: section: replace @ with -   Peng Fan (OSS)
  • [PATCH V3 5/7] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
  • [PATCH V3 6/7] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
  • [PATCH V3 7/7] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Peng Fan (OSS)
• [PATCH] arm64: zynqmp: zynqmp-zcu106-rev1.0: Fix DP PLL configuration   Michal Simek
  • [PATCH] arm64: zynqmp: zynqmp-zcu106-rev1.0: Fix DP PLL configuration   Michal Simek
• [PATCH] xilinx: zynqmp: Do not guard SPL_FS_LOAD_PAYLOAD_NAME by SDHCI driver   Michal Simek
  • [PATCH] xilinx: zynqmp: Do not guard SPL_FS_LOAD_PAYLOAD_NAME by SDHCI driver   Michal Simek
• [PATCH] soc: xilinx: zynqmp: fix out of bounds array access   Michal Simek
• [PATCH] arm64: zynqmp: Set qspi tx-buswidth to 4   Michal Simek
  • [PATCH] arm64: zynqmp: Set qspi tx-buswidth to 4   Michal Simek
• [PATCH] squashfs: Fix compilation on big endian systems   Pali Rohár
  • [PATCH] squashfs: Fix compilation on big endian systems   Pali Rohár
• [PULL] u-boot-stm32/master v2022.07 = u-boot-stm32-20220510   Patrice CHOTARD
  • [PULL] u-boot-stm32/master v2022.07 = u-boot-stm32-20220510   Tom Rini
• [PATCH] misc: Correct Kconfig dependencies for a number of options   Tom Rini
  • [PATCH] misc: Correct Kconfig dependencies for a number of options   Sean Anderson
    • [PATCH] misc: Correct Kconfig dependencies for a number of options   Tom Rini
• [PATCH v2] misc: Fix always compiling MISC even for SPL/TPL   Tom Rini
• [v2] misc: Correct Kconfig dependencies for a number of options   Tom Rini
  • [v2] misc: Correct Kconfig dependencies for a number of options   Sean Anderson
• [PATCH] dm: core: Provide fallbacks for ofnode_conf_read_...   Sean Anderson
• [PATCH] zlib: Port fix for CVE-2018-25032 to U-Boot   Tom Rini
• [PATCH 1/1] btrfs: simplify lookup_data_extent()   Heinrich Schuchardt
  • [PATCH 1/1] btrfs: simplify lookup_data_extent()   Qu Wenruo
    • [PATCH 1/1] btrfs: simplify lookup_data_extent()   Qu Wenruo
  • [PATCH 1/1] btrfs: simplify lookup_data_extent()   Anand Jain
• [PATCH 1/1] fs/squashfs: fix sqfs_read_sblk()   Heinrich Schuchardt
• [PATCH] net: fix phy_string_for_interface   Tim Harvey
  • [PATCH] net: fix phy_string_for_interface   Stefan Roese
  • [PATCH] net: fix phy_string_for_interface   Marek Behún
    • [PATCH] net: fix phy_string_for_interface   Ramon Fried
  • [PATCH] net: fix phy_string_for_interface   Tom Rini
• [PATCH] kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP option   Fabio Estevam
  • [PATCH] kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP option   Frieder Schrempf
  • [PATCH] kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP option   sbabic at denx.de
• [PATCH] gpio: sunxi: Fix build with CONFIG_SPL_SERIAL=n   Samuel Holland
  • [PATCH] gpio: sunxi: Fix build with CONFIG_SPL_SERIAL=n   Andre Przywara
• runtime configuration of env_addr   Hiren Mehta
  • runtime configuration of env_addr   Heinrich Schuchardt
• [PATCH v2 0/2] Add support for dynamic overriding of default SF bus   Vaishnav Achath
  • [PATCH v2 1/2] common: spl: spl_spi: add support for dynamic override of sf bus   Vaishnav Achath
    • [PATCH v2 1/2] common: spl: spl_spi: add support for dynamic override of sf bus   Heiko Schocher
      • [PATCH v2 1/2] common: spl: spl_spi: add support for dynamic override of sf bus   Vaishnav Achath
    • [PATCH v2 1/2] common: spl: spl_spi: add support for dynamic override of sf bus   Pratyush Yadav
  • [PATCH v2 2/2] arm: k3: j721e: add dynamic sf bus override support for j721e   Vaishnav Achath
    • [PATCH v2 2/2] arm: k3: j721e: add dynamic sf bus override support for j721e   Pratyush Yadav
• [PATCH 1/2] watchdog: octeontx_wdt: Add MIPS Octeon support   Stefan Roese
• [PATCH 2/2] mips: octeon: octeon_ebb7304_defconfig: Enable watchdog support   Stefan Roese
• [PATCH] caam: Fix crash in case caam_jr_probe failed   Gaurav Jain
  • [PATCH] caam: Fix crash in case caam_jr_probe failed   sbabic at denx.de
• [PATCH] i.MX8ULP: add display_ele_fw_version api   Gaurav Jain
  • [PATCH] i.MX8ULP: add display_ele_fw_version api   sbabic at denx.de
• [PATCH] arm: gic_v2: Skip gic_init_secure when cpu is not in el3   Michal Simek
  • [PATCH] arm: gic_v2: Skip gic_init_secure when cpu is not in el3   Michal Simek
    • [PATCH] arm: gic_v2: Skip gic_init_secure when cpu is not in el3   Tom Rini
  • [PATCH] arm: gic_v2: Skip gic_init_secure when cpu is not in el3   Tom Rini
• [PATCH] crypto/fsl: fsl_hash: Fix dcache issue in caam_hash_finish   Gaurav Jain
  • [PATCH] crypto/fsl: fsl_hash: Fix dcache issue in caam_hash_finish   Rasmus Villemoes
    • [PATCH] crypto/fsl: fsl_hash: Fix dcache issue in caam_hash_finish   Horia Geantă
  • [PATCH] crypto/fsl: fsl_hash: Fix dcache issue in caam_hash_finish   sbabic at denx.de
• [PATCH] scripts: Introduce {quiet_,}cmd_bin2c   Pierre-Clément Tosi
• [PATCH 00/10] arm64: zynqmp: Various DT fixes   Michal Simek
  • [PATCH 02/10] arm64: zynqmp: Add gpio labels for modepin   Michal Simek
  • [PATCH 03/10] arm64: zynqmp: Fix opp-table-cpu   Michal Simek
  • [PATCH 04/10] arm64: zynqmp: Add power domain description for PL   Michal Simek
  • [PATCH 05/10] arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells property   Michal Simek
  • [PATCH 06/10] arm64: zynqmp: Add dmas, gpu, rtc, watchdogs and opp nodes for SOM   Michal Simek
  • [PATCH 07/10] Revert "arm64: zynqmp: Add zynqmp firmware specific DT nodes"   Michal Simek
  • [PATCH 08/10] arm64: zynqmp: Add PHY description for SGMII on vck190 SC   Michal Simek
  • [PATCH 09/10] arm64: zynqmp: Add linux,code for fwuen button   Michal Simek
  • [PATCH 10/10] arm64: zynqmp: Add DT description for si5328 for zcu102/zcu106   Michal Simek
  • [PATCH 00/10] arm64: zynqmp: Various DT fixes   Michal Simek
• [PATCH 01/10] arm64: zynqmp: Add mode-pin GPIO controller DT node   Michal Simek
• [PATCH v2 0/2] board/armltd: add support for corstone1000   Rui Miguel Silva
  • [PATCH v2 1/2] cmd: load: add load command for memory mapped   Rui Miguel Silva
    • [PATCH v2 1/2] cmd: load: add load command for memory mapped   Tom Rini
  • [PATCH v2 2/2] arm: add support to corstone1000 platform   Rui Miguel Silva
    • [PATCH v2 2/2] arm: add support to corstone1000 platform   Tom Rini
• [PATCH] net: dwc_eth_qos: fix double resource leak in eqos_remove()   Rasmus Villemoes
  • [PATCH] net: dwc_eth_qos: fix double resource leak in eqos_remove()   Ramon Fried
• [PATCH] net: dwc_eth_qos: lift parsing of max-speed DT property to common code   Rasmus Villemoes
  • [PATCH] net: dwc_eth_qos: lift parsing of max-speed DT property to common code   Ramon Fried
• [PATCH V2 0/4] MXS nand fixes in SPL   Tim Harvey
• [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format   Jerome Forissier
  • [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format   Peter Griffin
  • [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format   Kever Yang
  • [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format   Alper Nebi Yasak
    • [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format   Jerome Forissier
      • [PATCH] mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format   Alper Nebi Yasak
• [PATCH] Makefile: update warning about CONFIG_OF_EMBED   Tom Rini
• [PATCH] mtd: rawnand: fsl_elbc: Fix detection when nand_scan_ident() has not selected ecc.mode   Pali Rohár
• [PATCH 1/2] mmc: fsl_esdhc: Set fallback mode to 1-bit   Pali Rohár
  • [PATCH 1/2] mmc: fsl_esdhc: Set fallback mode to 1-bit   Jaehoon Chung
• [PATCH 2/2] mmc: fsl_esdhc: Add new config option for default fallback mode   Pali Rohár
  • [PATCH 2/2] mmc: fsl_esdhc: Add new config option for default fallback mode   Jaehoon Chung
    • [PATCH 2/2] mmc: fsl_esdhc: Add new config option for default fallback mode   Pali Rohár
      • [PATCH 2/2] mmc: fsl_esdhc: Add new config option for default fallback mode   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc_spl: Fix checking for number of read sectors   Pali Rohár
  • [PATCH] mmc: fsl_esdhc_spl: Fix checking for number of read sectors   Jaehoon Chung
  • [PATCH] mmc: fsl_esdhc_spl: Fix checking for number of read sectors   Tom Rini
• [PATCH 1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location   Pali Rohár
  • [PATCH 3/3] powerpc: mpc85xx: Fix loading U-Boot proper from SD card in SPL   Pali Rohár
• [PATCH 2/3] mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS   Pali Rohár
• [PATCH] powerpc: mpc85xx: Simplify jump to _start_cont in flash code   Pali Rohár
• [PATCH v2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
• [PATCH 7/8] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values   Pali Rohár
  • [PATCH 7/8] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values   Pali Rohár
• Ineffective fix of CVE-2019-14196   zi0Black
  • Ineffective fix of CVE-2019-14196   Tom Rini
• [PATCH] i2c: ast_i2c: Remove SCL direct drive mode   Eddie James
  • [PATCH] i2c: ast_i2c: Remove SCL direct drive mode   Heiko Schocher
  • [PATCH] i2c: ast_i2c: Remove SCL direct drive mode   Joel Stanley
    • [PATCH] i2c: ast_i2c: Remove SCL direct drive mode   Ryan Chen
• [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
  • [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
• [PATCH 2/2] Add SCSI scan for ENV in EXT4 or FAT   Rogier Stam
• [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Marek Vasut
  • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Patrick DELAUNAY
    • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Marek Vasut
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Patrick DELAUNAY
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Marek Vasut
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Patrick DELAUNAY
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Marek Vasut
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Patrick DELAUNAY
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Marek Vasut
      • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Patrick DELAUNAY
    • [PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96   Patrick DELAUNAY
• Add SCSI scan for ENV in EXT4 or FAT   rogier at unrailed.org
  • [PATCH v2] Add SCSI scan for ENV in EXT4 or FAT   rogier at unrailed.org
• [PATCH v2 0/8] Add MV88E61xx DSA driver and use on gwventana   Tim Harvey
  • [PATCH 3/8] net: dsa: ensure dsa driver has proper ops   Tim Harvey
    • [PATCH 3/8] net: dsa: ensure dsa driver has proper ops   Vladimir Oltean
  • [PATCH 4/8] net: dsa: allow rcv() and xmit() to be optional   Tim Harvey
    • [PATCH 4/8] net: dsa: allow rcv() and xmit() to be optional   Vladimir Oltean
  • [PATCH 6/8] net: fec: add support for DM_MDIO   Tim Harvey
  • [PATCH 7/8] net: add MV88E61xx DSA driver   Tim Harvey
    • [PATCH 7/8] net: add MV88E61xx DSA driver   Vladimir Oltean
  • [PATCH 8/8] board: gw_ventana: enable MV88E61XX DSA support   Tim Harvey
    • [PATCH 8/8] board: gw_ventana: enable MV88E61XX DSA support   Vladimir Oltean
      • [PATCH 8/8] board: gw_ventana: enable MV88E61XX DSA support   Tim Harvey
      • [PATCH 8/8] board: gw_ventana: enable MV88E61XX DSA support   Vladimir Oltean
• [PATCH 1/8] net: mdio-uclass: scan for dm mdio children on post-bind   Tim Harvey
• [PATCH 2/8] net: dsa: move cpu port probe to dsa_post_probe   Tim Harvey
  • [PATCH 2/8] net: dsa: move cpu port probe to dsa_post_probe   Vladimir Oltean
• [PATCH 5/8] net: ksz9477: remove unnecessary xmit and recv functions   Tim Harvey
  • [PATCH 5/8] net: ksz9477: remove unnecessary xmit and recv functions   Vladimir Oltean
• [PATCH v2 0/3] efi_loader: bootmgr: fix a problem in loading an image from a short-path   AKASHI Takahiro
  • [PATCH v2 1/3] efi_loader: disk: add efi_disk_is_removable()   AKASHI Takahiro
    • [PATCH v2 1/3] efi_loader: disk: add efi_disk_is_removable()   Heinrich Schuchardt
  • [PATCH v2 2/3] efi_loader: bootmgr: fix a problem in loading an image from a short-path   AKASHI Takahiro
    • [PATCH v2 2/3] efi_loader: bootmgr: fix a problem in loading an image from a short-path   Heinrich Schuchardt
      • [PATCH v2 2/3] efi_loader: bootmgr: fix a problem in loading an image from a short-path   AKASHI Takahiro
      • Re: [PATCH v2 2/3] efi_loader: bootmgr: fix a problem in loading an image from a short-path   Heinrich Schuchardt
  • [PATCH v2 3/3] test: efi_bootmgr: add a test case for a short-form path   AKASHI Takahiro
    • [PATCH v2 3/3] test: efi_bootmgr: add a test case for a short-form path   Heinrich Schuchardt
      • [PATCH v2 3/3] test: efi_bootmgr: add a test case for a short-form path   AKASHI Takahiro
• [PATCH] arch: arm: mach-k3: am642_init: bring back MCU_PADCFG_MMR1 unlock   Christian Gmeiner
  • [PATCH] arch: arm: mach-k3: am642_init: bring back MCU_PADCFG_MMR1 unlock   Nishanth Menon
• [PATCH v4 0/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice CHOTARD
• [PATCH v1 0/2] spi: stm32_qspi: flags management fixes   Patrice Chotard
  • [PATCH v1 1/2] spi: stm32_qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()   Patrice Chotard
    • [PATCH v1 1/2] spi: stm32_qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v1 1/2] spi: stm32_qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()   Patrick DELAUNAY
  • [PATCH v1 2/2] spi: stm32_qspi: Remove SR_BUSY bit check before sending command   Patrice Chotard
    • [PATCH v1 2/2] spi: stm32_qspi: Remove SR_BUSY bit check before sending command   Patrick DELAUNAY
      • [PATCH v1 2/2] spi: stm32_qspi: Remove SR_BUSY bit check before sending command   Patrick DELAUNAY
• [PATCH 0/3] dwc_eth_qos PHY dt node fixups   Rasmus Villemoes
  • [PATCH 1/3] net: dwc_eth_qos: remove use of DWC_NET_PHYADDR   Rasmus Villemoes
    • [PATCH 1/3] net: dwc_eth_qos: remove use of DWC_NET_PHYADDR   Ramon Fried
  • [PATCH 2/3] phy: introduce eth_phy_get_node_and_addr()   Rasmus Villemoes
  • [PATCH 3/3] net: dwc_eth_qos: set proper DT node for phy device   Rasmus Villemoes
    • [PATCH 3/3] net: dwc_eth_qos: set proper DT node for phy device   Ramon Fried
• [PATCH 0/5] Add support for versal specific cadence ospi driver   Ashok Reddy Soma
  • [PATCH 1/5] spi: cadence-qspi: move cadence qspi macros to header file   Ashok Reddy Soma
  • [PATCH 3/5] spi: cadence-qspi: reset qspi flash for versal platform   Ashok Reddy Soma
  • [PATCH 5/5] spi: cadence-qspi: Fix programming ospi flash speed   Ashok Reddy Soma
  • [PATCH 0/5] Add support for versal specific cadence ospi driver   Michal Simek
• [PATCH 2/5] arm64: versal: Add versal specific cadence ospi driver   Ashok Reddy Soma
• [PATCH 4/5] spi: cadence_qspi: Enable apb linear mode for apb read & write operations   Ashok Reddy Soma
• [PATCH] net: mpc8xx_fec: Migrate to DM_ETH   Christophe Leroy
  • [PATCH] net: mpc8xx_fec: Migrate to DM_ETH   Ramon Fried
• [PATCH 0/3] usb: add isp1760 hcd support   Rui Miguel Silva
  • [PATCH 1/3] usb: common: move urb code to common   Rui Miguel Silva
  • [PATCH 2/3] usb: add isp1760 family driver   Rui Miguel Silva
  • [PATCH 3/3] corstone1000: enable isp1763 usb controller and mmc   Rui Miguel Silva
• [PATCH] Update email address and company name   Christophe Leroy
• [PATCH v2] fs/squashfs: use lldiv function for math   Sean Nyekjaer
  • [PATCH v2] fs/squashfs: use lldiv function for math   Pali Rohár
  • [PATCH v2] fs/squashfs: use lldiv function for math   Tom Rini
• [PATCH] arm: socfpga: mailbox: Add mailbox command for HPS execution notifcation   dinesh.maniyam at intel.com
• [PATCH] arm: socfpga: spl: To notify SDM when SPL pass control to U-Boot   dinesh.maniyam at intel.com
• [PATCH 1/7] Convert CONFIG_SYS_PBSIZE to Kconfig   Tom Rini
  • [PATCH 2/7] Convert CONFIG_SYS_CBSIZE to Kconfig   Tom Rini
• [PATCH 3/7] Convert CONFIG_SYS_BARGSIZE to Kconfig   Tom Rini
• [PATCH 4/7] Convert CONFIG_HUSH_INIT_VAR to Kconfig   Tom Rini
• [PATCH 5/7] Convert CONFIG_SYS_BOOTPARAMS_LEN to Kconfig   Tom Rini
• [PATCH 6/7] arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace   Tom Rini
• [PATCH 7/7] spl: Remove CONFIG_SPL_BOARD_LOAD_IMAGE   Tom Rini
• [PATCH 00/14] SCMI multi-channel and optee shm   Etienne Carriere
  • [PATCH 01/14] firmware: scmi: optee: use TEE shared memory for SCMI messages   Etienne Carriere
  • [PATCH 02/14] firmware: scmi: optee: fix inline description of PTA_SCMI_CMD_GET_CHANNEL   Etienne Carriere
  • [PATCH 03/14] firmware: scmi: prepare scmi uclass API to multi-channel   Etienne Carriere
  • [PATCH 04/14] firmware: scmi: prepare uclass to pass channel reference   Etienne Carriere
  • [PATCH 05/14] firmware: scmi: factorize scmi transport look up   Etienne Carriere
  • [PATCH 06/14] firmware: scmi: add multi-channel support   Etienne Carriere
  • [PATCH 07/14] firmware: scmi: mailbox transport: implement multi-channel   Etienne Carriere
  • [PATCH 08/14] firmware: scmi: smccc transport: implement multi-channel   Etienne Carriere
  • [PATCH 09/14] firmware: scmi: optee transport: implement multi-channel   Etienne Carriere
  • [PATCH 10/14] clk: scmi: support SCMI multi-channel   Etienne Carriere
    • [PATCH 10/14] clk: scmi: support SCMI multi-channel   Sean Anderson
  • [PATCH 11/14] reset: scmi: support SCMI multi-channel   Etienne Carriere
  • [PATCH 12/14] power: regulator: scmi: support SCMI multi-channel   Etienne Carriere
    • [PATCH 12/14] power: regulator: scmi: support SCMI multi-channel   Jaehoon Chung
  • [PATCH 13/14] power: regulator: scmi: simplify scmi_voltd_set_enable()   Etienne Carriere
    • [PATCH 13/14] power: regulator: scmi: simplify scmi_voltd_set_enable()   Jaehoon Chung
  • [PATCH 14/14] firmware: scmi: use multi channel in mailbox, optee and smccc agents   Etienne Carriere
• [PATCH] RockPi4: Add UEFI capsule update support   Sughosh Ganu
  • [PATCH] RockPi4: Add UEFI capsule update support   Jerome Forissier
  • [PATCH] RockPi4: Add UEFI capsule update support   Peter Robinson
    • [PATCH] RockPi4: Add UEFI capsule update support   Sughosh Ganu
  • [PATCH] RockPi4: Add UEFI capsule update support   Peter Griffin
• [PATCH 1/1] config: ls2088ardb: Add config CONFIG_SYS_FLASH_CFI_WIDTH   Priyanka Singh
• [PATCH v1] sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform   qianfanguijin at 163.com
  • [PATCH v1] sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform   Peter Robinson
• imx6ull: NAND boot fails when block 0x00000000 is bad   Thierry Bultel
  • imx6ull: NAND boot fails when block 0x00000000 is bad   Fabio Estevam
    • imx6ull: NAND boot fails when block 0x00000000 is bad   Michael Nazzareno Trimarchi
      • imx6ull: NAND boot fails when block 0x00000000 is bad   Thierry Bultel
      • imx6ull: NAND boot fails when block 0x00000000 is bad   Francesco Dolcini
      • imx6ull: NAND boot fails when block 0x00000000 is bad   Michael Nazzareno Trimarchi
      • imx6ull: NAND boot fails when block 0x00000000 is bad   Marcel Ziswiler
      • imx6ull: NAND boot fails when block 0x00000000 is bad   Michael Nazzareno Trimarchi
      • imx6ull: NAND boot fails when block 0x00000000 is bad   Thierry Bultel
• [PATCH v2 1/6] arm_ffa: introduce Arm FF-A low-level driver   Ilias Apalodimas
  • [PATCH v2 1/6] arm_ffa: introduce Arm FF-A low-level driver   Jens Wiklander
• [PATCH 0/3] Enable QSPI and SF command   Sergiu Moga
  • [PATCH 1/3] ARM: dts: sam9x60: fix compatible for qspi child node   Sergiu Moga
  • [PATCH 2/3] configs: at91: sam9x60ek: enable QSPI and SF command   Sergiu Moga
  • [PATCH 3/3] configs: at91: sama5d2_icp: enable QSPI and SF command   Sergiu Moga
• [PATCH 0/2] tpm: Add support for TPMv2.x I2C chips   Eddie James
  • [PATCH 1/2] tpm: core: Set timeouts before requesting locality   Eddie James
    • [PATCH 1/2] tpm: core: Set timeouts before requesting locality   Ilias Apalodimas
    • [PATCH 1/2] tpm: core: Set timeouts before requesting locality   Joel Stanley
  • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Eddie James
    • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Joel Stanley
    • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Ilias Apalodimas
      • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Eddie James
      • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Ilias Apalodimas
      • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Joel Stanley
      • [PATCH 2/2] tpm: add support for TPMv2.x I2C chips   Ilias Apalodimas
• [PATCH] mtd: mtdpart: Change size type from fdt_addr_t to fdt_size_t   Pali Rohár
  • [PATCH] mtd: mtdpart: Change size type from fdt_addr_t to fdt_size_t   Marek Behún
• Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
  • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
    • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
      • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
      • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
      • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
      • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
      • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
      • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
      • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
      • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
      • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
      • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
      • Broken support for 4GB DDR on 32-bit platforms   Tom Rini
      • Broken support for 4GB DDR on 32-bit platforms   Pali Rohár
• [PATCH v2] sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform   qianfanguijin at 163.com
  • [PATCH v2] sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform   Chen-Yu Tsai
    • [PATCH v2] sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform   qianfan
• [PATCH] imx8mn-*-evk: rename mkimage config   Heiko Thiery
• [PATCH] drivers: ram: rockchip: Fix dram channels calculation for rk3399   pengphei at foxmail.com
  • [PATCH] drivers: ram: rockchip: Fix dram channels calculation for rk3399   pengphei at foxmail.com
• [PATCH V3 0/5] MXS nand fixes in SPL   Michael Trimarchi
  • [PATCH V3 1/5] nand: raw: mxs_nand: Fix specific hook registration   Michael Trimarchi
  • [PATCH V3 2/5] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Trimarchi
  • [PATCH V3 3/5] arm: mach-imx: cmd_nandbcb fix bad block handling   Michael Trimarchi
  • [PATCH V3 4/5] spl: spl_nand: Fix bad block handling in fitImage   Michael Trimarchi
  • [PATCH 5/5] board: bsh: Switch to nand spl load instead of romapi   Michael Trimarchi
• [PATCH V3 5/5] board: bsh: Switch to nand spl load instead of romapi   Michael Trimarchi
• [PATCH V4 0/5] MXS nand fixes in SPL   Michael Trimarchi
  • [PATCH V4 1/5] nand: raw: mxs_nand: Fix specific hook registration   Michael Trimarchi
    • [PATCH V4 1/5] nand: raw: mxs_nand: Fix specific hook registration   sbabic at denx.de
  • [PATCH V4 2/5] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Trimarchi
    • [PATCH V4 2/5] mtd: nand: mxs_nand_spl: Fix bad block skipping   sbabic at denx.de
  • [PATCH V4 3/5] arm: mach-imx: cmd_nandbcb fix bad block handling   Michael Trimarchi
    • [PATCH V4 3/5] arm: mach-imx: cmd_nandbcb fix bad block handling   sbabic at denx.de
  • [PATCH V4 4/5] spl: spl_nand: Fix bad block handling in fitImage   Michael Trimarchi
    • [PATCH V4 4/5] spl: spl_nand: Fix bad block handling in fitImage   sbabic at denx.de
  • [PATCH V4 5/5] board: bsh: Switch to nand spl load instead of romapi   Michael Trimarchi
    • [PATCH V4 5/5] board: bsh: Switch to nand spl load instead of romapi   Michael Nazzareno Trimarchi
      • [PATCH V4 5/5] board: bsh: Switch to nand spl load instead of romapi   Stefano Babic
  • [PATCH V4 0/5] MXS nand fixes in SPL   Fabio Estevam
• [PATCH] imx: imx8mn_smm_s2/s2pro: Enable TrustZone   Michael Trimarchi
  • [PATCH] imx: imx8mn_smm_s2/s2pro: Enable TrustZone   sbabic at denx.de
• [PATCH 1/3] ARM: dts: omap3-devkit8000: Add support for Devkit8000   Anthoine Bourgeois
  • [PATCH 3/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_ETH warning   Anthoine Bourgeois
• [PATCH 2/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_I2C warning   Anthoine Bourgeois
  • [PATCH 2/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_I2C warning   Tom Rini
    • [PATCH 2/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_I2C warning   Derald Woods
      • [PATCH 2/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_I2C warning   Anthoine Bourgeois
• [PATCH 1/2] event: remove CONFIG_EVENT_DYNAMIC check in event_register()   Ovidiu Panait
  • [PATCH 2/2] event: fix static events for CONFIG_NEEDS_MANUAL_RELOC   Ovidiu Panait
• [PATCH 01/10] Makefile: v2 Allow LTO to be disabled for a build   Andrew Scull
• [PATCH v2] sandbox: sdl: Add stub sandbox_sdl_remove_display()   Andrew Scull
• [PATCH v5 00/25] Add support for MediaTek MT7621 SoC - v5   Weijie Gao
  • [PATCH v5 02/25] mips: add more definitions for asm/cm.h   Weijie Gao
    • [PATCH v5 02/25] mips: add more definitions for asm/cm.h   Daniel Schwierzeck
  • [PATCH v5 03/25] mips: add __image_copy_len for SPL linker script   Weijie Gao
    • [PATCH v5 03/25] mips: add __image_copy_len for SPL linker script   Daniel Schwierzeck
  • [PATCH v5 04/25] mips: add support for noncached_alloc()   Weijie Gao
    • [PATCH v5 04/25] mips: add support for noncached_alloc()   Daniel Schwierzeck
  • [PATCH v5 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
    • [PATCH v5 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Daniel Schwierzeck
      • [PATCH v5 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 06/25] mips: mtmips: add two reference boards for mt7621   Weijie Gao
    • [PATCH v5 06/25] mips: mtmips: add two reference boards for mt7621   Daniel Schwierzeck
  • [PATCH v5 07/25] doc: mediatek: add documentation for mt7621 reference boards   Weijie Gao
    • [PATCH v5 07/25] doc: mediatek: add documentation for mt7621 reference boards   Daniel Schwierzeck
  • [PATCH v5 08/25] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Weijie Gao
    • [PATCH v5 08/25] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Sean Anderson
  • [PATCH v5 09/25] reset: mtmips: add reset controller support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 10/25] pinctrl: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
    • [PATCH v5 10/25] pinctrl: mtmips: add support for MediaTek MT7621 SoC   Daniel Schwierzeck
  • [PATCH v5 11/25] usb: xhci-mtk: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 12/25] phy: mtk-tphy: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 13/25] spi: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 14/25] gpio: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 15/25] watchdog: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 16/25] mmc: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 17/25] net: mediatek: remap iobase address   Weijie Gao
  • [PATCH v5 18/25] net: mediatek: use regmap api to modify ethsys registers   Weijie Gao
    • [PATCH v5 18/25] net: mediatek: use regmap api to modify ethsys registers   Daniel Schwierzeck
  • [PATCH v5 19/25] net: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 20/25] nand: raw: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v5 21/25] spl: allow using nand base without standard nand driver   Weijie Gao
  • [PATCH v5 22/25] spl: spl_legacy: fix the use of SPL_COPY_PAYLOAD_ONLY   Weijie Gao
    • [PATCH v5 22/25] spl: spl_legacy: fix the use of SPL_COPY_PAYLOAD_ONLY   Daniel Schwierzeck
  • [PATCH v5 23/25] spl: nand: support loading legacy image with payload compressed   Weijie Gao
    • [PATCH v5 23/25] spl: nand: support loading legacy image with payload compressed   Daniel Schwierzeck
      • [PATCH v5 23/25] spl: nand: support loading legacy image with payload compressed   Weijie Gao
  • [PATCH v5 24/25] tools: mtk_image: add support for MT7621 NAND images   Weijie Gao
    • [PATCH v5 24/25] tools: mtk_image: add support for MT7621 NAND images   Daniel Schwierzeck
  • [PATCH v5 25/25] MAINTAINERS: update maintainer for MediaTek MIPS platform   Weijie Gao
• [PATCH v5 01/25] mips: add asm/mipsmtregs.h for MIPS multi-threading   Weijie Gao
  • [PATCH v5 01/25] mips: add asm/mipsmtregs.h for MIPS multi-threading   Daniel Schwierzeck
• [PATCH 0/3] Updates for omap3-evm   Derald D. Woods
  • [PATCH 1/3] ARM: omap3: evm: Power on MMC when setting up PMIC   Derald D. Woods
  • [PATCH 2/3] ARM: omap3: evm: Complete DM_I2C migration   Derald D. Woods
  • [PATCH 3/3] ARM: omap3: evm: Fix 'fitImage' booting   Derald D. Woods
• [PATCH] imx: imx8m: drop uneeded check   ZHIZHIKIN Andrey
  • [PATCH] imx: imx8m: drop uneeded check   Peng Fan
    • [PATCH] imx: imx8m: drop uneeded check   ZHIZHIKIN Andrey
  • [PATCH] imx: imx8m: drop uneeded check   sbabic at denx.de
• Clarification on mtd: nand: mxs_nand_spl: Remove the page aligned access   Michael Nazzareno Trimarchi
• [PATCH 0/3] imx8m: Automatically add the optee firmware node to the FDT   Alban Bedel
  • [PATCH 1/3] optee: Add an helper to add the optee firmware node in the FDT   Alban Bedel
  • [PATCH 2/3] imx8m: Automatically add the optee firmware node to the FDT   Alban Bedel
    • [PATCH 2/3] imx8m: Automatically add the optee firmware node to the FDT   Michael Nazzareno Trimarchi
      • [PATCH 2/3] imx8m: Automatically add the optee firmware node to the FDT   Jens Wiklander
      • [PATCH 2/3] imx8m: Automatically add the optee firmware node to the FDT   Michael Nazzareno Trimarchi
      • [PATCH 2/3] imx8m: Automatically add the optee firmware node to the FDT   Bedel, Alban
  • [PATCH 3/3] imx8: Use the optee lib to add the optee firmware node to the FDT   Alban Bedel
• [PATCH] powerpc: Add support for CZ.NIC Turris 1.x routers   Pali Rohár
• [PATCH v3 00/12] virtio: Harden and test vring   Andrew Scull
  • [PATCH v3 01/12] virtio_ring: Merge identical variables   Andrew Scull
  • [PATCH v3 02/12] virtio_ring: Add helper to attach vring descriptor   Andrew Scull
  • [PATCH v3 03/12] virtio_ring: Maintain a shadow copy of descriptors   Andrew Scull
  • [PATCH v3 04/12] virtio_ring: Check used descriptors are chain heads   Andrew Scull
  • [PATCH v3 05/12] dm: test: virtio: Test the virtio ring   Andrew Scull
  • [PATCH v3 06/12] virtio: sandbox: Fix device features bitfield   Andrew Scull
  • [PATCH v3 07/12] test: dm: virtio: Test notify before del_vqs   Andrew Scull
  • [PATCH v3 08/12] test: dm: virtio: Split out virtio device tests   Andrew Scull
  • [PATCH v3 09/12] virtio: sandbox: Bind RNG rather than block device   Andrew Scull
  • [PATCH v3 10/12] test: dm: virtio: Test virtio device driver probing   Andrew Scull
  • [PATCH v3 11/12] virtio: rng: Check length before copying   Andrew Scull
  • [PATCH v3 12/12] test: dm: virtio_rng: Test virtio-rng with faked device   Andrew Scull
• [PATCH v6 0/6] enable menu-driven boot device selection   Masahisa Kojima
  • [PATCH v6 1/6] efi_loader: menu-driven addition of UEFI boot option   Masahisa Kojima
    • [PATCH v6 1/6] efi_loader: menu-driven addition of UEFI boot option   Takahiro Akashi
      • [PATCH v6 1/6] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
  • [PATCH v6 2/6] efi_loader: menu-driven deletion of UEFI boot variable   Masahisa Kojima
  • [PATCH v6 3/6] efi_loader: menu-driven update of UEFI bootorder variable   Masahisa Kojima
    • [PATCH v6 3/6] efi_loader: menu-driven update of UEFI bootorder variable   Heinrich Schuchardt
      • [PATCH v6 3/6] efi_loader: menu-driven update of UEFI bootorder variable   Masahisa Kojima
  • [PATCH v6 4/6] bootmenu: add removable media entries   Masahisa Kojima
  • [PATCH v6 5/6] doc:bootmenu: add description for UEFI boot support   Masahisa Kojima
    • [PATCH v6 5/6] doc:bootmenu: add description for UEFI boot support   Takahiro Akashi
      • [PATCH v6 5/6] doc:bootmenu: add description for UEFI boot support   Masahisa Kojima
  • [PATCH v6 6/6] lib/charset: fix compile warnings   Masahisa Kojima
• [RFC PATCH v2 0/8] Build Rockchip final images using binman   Andrew Abbott
  • [RFC PATCH v2 1/8] binman: mkimage: Support ':'-separated inputs   Andrew Abbott
    • [RFC PATCH v2 1/8] binman: mkimage: Support ':'-separated inputs   Alper Nebi Yasak
      • [RFC PATCH v2 1/8] binman: mkimage: Support ':'-separated inputs   Andrew Abbott
  • [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images   Andrew Abbott
    • [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images   Alper Nebi Yasak
      • [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images   Andrew Abbott
      • [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images   Alper Nebi Yasak
  • [RFC PATCH v2 3/8] soc: rockchip: Include common U-Boot dtsi file   Andrew Abbott
    • [RFC PATCH v2 3/8] soc: rockchip: Include common U-Boot dtsi file   Alper Nebi Yasak
  • [RFC PATCH v2 4/8] board: rockchip: Move SPI U-Boot offset to config   Andrew Abbott
    • [RFC PATCH v2 4/8] board: rockchip: Move SPI U-Boot offset to config   Alper Nebi Yasak
  • [RFC PATCH v2 5/8] rockchip: Remove obsolete Makefile targets   Andrew Abbott
  • [RFC PATCH v2 6/8] rockchip: Enable binman for ARM64   Andrew Abbott
    • [RFC PATCH v2 6/8] rockchip: Enable binman for ARM64   Alper Nebi Yasak
      • [RFC PATCH v2 6/8] rockchip: Enable binman for ARM64   Andrew Abbott
  • [RFC PATCH v2 7/8] doc: rockchip: Update for new binman image generation   Andrew Abbott
  • [RFC PATCH v2 8/8] board: rockpro64: Enable building SPI image   Andrew Abbott
  • [RFC PATCH v2 0/8] Build Rockchip final images using binman   Jerome Forissier
    • [RFC PATCH v2 0/8] Build Rockchip final images using binman   Andrew Abbott
  • [RFC PATCH v2 0/8] Build Rockchip final images using binman   Alper Nebi Yasak
    • [RFC PATCH v2 0/8] Build Rockchip final images using binman   Andrew Abbott
• [PATCH] arm64: zynqmp: zynqmp-sm-k26-revA: Fix DP PLL configuration   Michal Simek
  • [PATCH] arm64: zynqmp: zynqmp-sm-k26-revA: Fix DP PLL configuration   Michal Simek
• [PATCH] Fix CVE-2022-30767 (old CVE-2019-14196)   Andrea zi0Black Cappa
  • [PATCH] Fix CVE-2022-30767 (old CVE-2019-14196)   Tom Rini
• [PATCH v3 1/2] mkimage: Document more misc options   Sean Anderson
  • [PATCH v3 2/2] mkimage: Support signing 'auto' FITs   Sean Anderson
• [PATCH] cmd: source: Support FITs with external data   Sean Anderson
• [PATCH v2 0/3] Support Devkit800 device tree   Anthoine Bourgeois
  • [PATCH v2 1/3] ARM: dts: omap3-devkit8000: Add support for Devkit8000   Anthoine Bourgeois
  • [PATCH v2 2/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_I2C warning   Anthoine Bourgeois
  • [PATCH v2 0/3] Support Devkit800 device tree   Anthoine Bourgeois
• [PATCH v2 3/3] ARM: dts: omap3-devkit8000: Fix CONFIG_DM_ETH warning   Anthoine Bourgeois
• [PATCH v1] ARM: imx8mm: verdin-imx8mm: fix board hang in spl   Marcel Ziswiler
  • [PATCH v1] ARM: imx8mm: verdin-imx8mm: fix board hang in spl   Marcel Ziswiler
    • [PATCH v1] ARM: imx8mm: verdin-imx8mm: fix board hang in spl   Stefano Babic
  • [PATCH v1] ARM: imx8mm: verdin-imx8mm: fix board hang in spl   sbabic at denx.de
• [PATCH v2 04/12] linker_lists: Rename sections to remove . prefix   Heinrich Schuchardt
  • [PATCH v2 04/12] linker_lists: Rename sections to remove . prefix   Andrew Scull
• [PATCH v1] i2c: nuvoton: Add NPCM7xx i2c driver   Jim Liu
  • [PATCH v1] i2c: nuvoton: Add NPCM7xx i2c driver   Heiko Schocher
    • [PATCH v1] i2c: nuvoton: Add NPCM7xx i2c driver   Jim Liu
      • [PATCH v1] i2c: nuvoton: Add NPCM7xx i2c driver   Heiko Schocher
      • [PATCH v1] i2c: nuvoton: Add NPCM7xx i2c driver   Jim Liu
• [PATCH v1] mmc: nuvoton: Add NPCM7xx mmc driver   Jim Liu
  • [PATCH v1] mmc: nuvoton: Add NPCM7xx mmc driver   Jaehoon Chung
    • [PATCH v1] mmc: nuvoton: Add NPCM7xx mmc driver   Jim Liu
      • [PATCH v1] mmc: nuvoton: Add NPCM7xx mmc driver   Jaehoon Chung
      • [PATCH v1] mmc: nuvoton: Add NPCM7xx mmc driver   Jim Liu
      • [PATCH v1] mmc: nuvoton: Add NPCM7xx mmc driver   Jim Liu
• [PATCH v1] net: nuvoton : Add NPCM7xx EMAC driver   Jim Liu
• [PATCH v1] pinctrl: nuvoton: Add NPCM7xx pinctrl driver   Jim Liu
• [PATCH 0/4] spi-synquacer fixes and improvement   Masahisa Kojima
  • [PATCH 1/4] spi: synquacer: busy variable must be initialized before use   Masahisa Kojima
    • [PATCH 1/4] spi: synquacer: busy variable must be initialized before use   Jassi Brar
  • [PATCH 2/4] spi: synquacer: wait until slave is deselected   Masahisa Kojima
    • [PATCH 2/4] spi: synquacer: wait until slave is deselected   Jassi Brar
  • [PATCH 3/4] spi: synquacer: DMSTART bit must not be set while transferring   Masahisa Kojima
    • [PATCH 3/4] spi: synquacer: DMSTART bit must not be set while transferring   Jassi Brar
  • [PATCH 4/4] spi: synquacer: simplify tx completion checking   Masahisa Kojima
    • [PATCH 4/4] spi: synquacer: simplify tx completion checking   Jassi Brar
• [PATCH] dm: core: convert of_machine_is_compatible to livetree   Patrick Delaunay
  • [Uboot-stm32] [PATCH] dm: core: convert of_machine_is_compatible to livetree   Patrice CHOTARD
• [PATCH] phy: dp83867: add dp83867_{read,write}_mmd helpers   Rasmus Villemoes
  • [PATCH] phy: dp83867: add dp83867_{read,write}_mmd helpers   Vladimir Oltean
    • [PATCH] phy: dp83867: add dp83867_{read,write}_mmd helpers   Rasmus Villemoes
      • [PATCH] phy: dp83867: add dp83867_{read,write}_mmd helpers   Vladimir Oltean
• [PATCH 1/3] test/py: Reset the console timeout value   Bin Meng
  • [PATCH 2/3] test/py: test_fs: Correct the test case name   Bin Meng
    • [PATCH 2/3] test/py: test_fs: Correct the test case name   Tom Rini
  • [PATCH 3/3] test/py: test_part: Correct the test case name   Bin Meng
    • [PATCH 3/3] test/py: test_part: Correct the test case name   Tom Rini
  • [PATCH 1/3] test/py: Reset the console timeout value   Tom Rini
• [PATCH] doc: sandbox: Correct the memory size config option   Bin Meng
• [PATCH] doc: sandbox: Add a note of disabling LTO when using gdb   Bin Meng
  • [PATCH] doc: sandbox: Add a note of disabling LTO when using gdb   Heinrich Schuchardt
• [PATCH] imx8mn_evk: Add Ethernet support to the LPDDR4 variant   Fabio Estevam
• [PATCH] serial: smh: Fake tstc   Sean Anderson
• [PATCH] ubifs: Fix lockup/crash when reading files   Pali Rohár
  • [PATCH] ubifs: Fix lockup/crash when reading files   Stefan Roese
    • [PATCH] ubifs: Fix lockup/crash when reading files   Pali Rohár
      • [PATCH] ubifs: Fix lockup/crash when reading files   Pali Rohár
      • [PATCH] ubifs: Fix lockup/crash when reading files   Stefan Roese
      • [PATCH] ubifs: Fix lockup/crash when reading files   Tom Rini
• [PATCH] Kconfig: hide options not intended for users in arch/Kconfig   Daniel Schwierzeck
  • [PATCH] Kconfig: hide options not intended for users in arch/Kconfig   Tom Rini
    • [PATCH] Kconfig: hide options not intended for users in arch/Kconfig   Daniel Schwierzeck
      • [PATCH] Kconfig: hide options not intended for users in arch/Kconfig   Tom Rini
      • [PATCH] Kconfig: hide options not intended for users in arch/Kconfig   Daniel Schwierzeck
      • [PATCH] Kconfig: hide options not intended for users in arch/Kconfig   Tom Rini
• [PATCH] net: ftgmac100: use bus name in mdio error messages   Zev Weiss
  • [PATCH] net: ftgmac100: use bus name in mdio error messages   Cédric Le Goater
• [PATCH 4/4] Convert CONFIG_USB_EHCI_IS_TDI to Kconfig   Chris Packham
  • [PATCH 4/4] Convert CONFIG_USB_EHCI_IS_TDI to Kconfig   Marek Behún
• [PATCH] driver: video: Check allocated pointers   Bin Meng
• [RESEND PATCH v4 0/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice Chotard
  • [RESEND PATCH v4 1/3] spi: spi-uclass: Add new spi_get_bus_and_cs() implementation   Patrice Chotard
  • [RESEND PATCH v4 2/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice Chotard
  • [RESEND PATCH v4 3/3] test: dm: spi: Replace _spi_get_bus_and_cs() by spi_get_bus_and_cs() in some case   Patrice Chotard
• [PATCH 1/2] riscv: ae350: Fix OF_BOARD boot failure   Leo Liang
• [PATCH 2/2] riscv: ae350: Fix OF_BOARD boot failure   Leo Liang
• [PATCH] cmd: pxe_utils: Check fdtcontroladdr in label_boot   Neil Armstrong
  • [PATCH] cmd: pxe_utils: Check fdtcontroladdr in label_boot   Tom Rini
    • [PATCH] cmd: pxe_utils: Check fdtcontroladdr in label_boot   Neil Armstrong
      • [PATCH] cmd: pxe_utils: Check fdtcontroladdr in label_boot   Peter Hoyes
      • [PATCH] cmd: pxe_utils: Check fdtcontroladdr in label_boot   Neil Armstrong
      • [PATCH] cmd: pxe_utils: Check fdtcontroladdr in label_boot   Tom Rini
• [PATCH v14 1/2] net: Add TCP protocol   Michal Simek
• [PATCH v5 07/12] efi_loader: disk: a helper function to create efi_disk objects from udevice   Neil Armstrong
  • [PATCH v5 07/12] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH v14 2/2] net: Add wget application   Michal Simek
• [PATCH v14 0/2] add TCP and HTTP for downloading images   Michal Simek
  • [PATCH v14 0/2] add TCP and HTTP for downloading images   Paul Liu
• [PATCH] usb: dwc3: Fix the error paths in usb3-phy PHY configuration   Aswath Govindraju
  • [PATCH] usb: dwc3: Fix the error paths in usb3-phy PHY configuration   Michal Simek
• [PATCH] arm64: zynqmp: Add support for kr260 revA/B boards   Michal Simek
• [PATCH] riscv: remove CONFIG_ARCH_MAP_SYSMEM from io.h   Michal Simek
  • [PATCH] riscv: remove CONFIG_ARCH_MAP_SYSMEM from io.h   Bin Meng
• [PATCH] serial: Setup serial base and freq for zynq/zynqmp   Michal Simek
• [PATCH] arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params()   Michal Simek
• [PATCH 0/3] AM65: Fix USB boot modes   Aswath Govindraju
  • [PATCH 2/3] arm: mach-k3: am6_init: Fix the path and value's length in the fixup performed for usb boot   Aswath Govindraju
  • [PATCH 3/3] configs: am65_evm_r5_usb*_defconfig: Sync the checks for size of image and stack from generic r5 defconfig   Aswath Govindraju
• [PATCH 1/3] arm: dts: k3-am654-r5-base-board: Fix the dt properties in usb0 instance   Aswath Govindraju
• [PATCH] xilinx: zynqmp: Wire tee for Multi DTB use cases   Michal Simek
  • [PATCH] xilinx: zynqmp: Wire tee for Multi DTB use cases   Michal Simek
• [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
  • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Peter Geis
    • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
    • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Peter Geis
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Peter Geis
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Peter Geis
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Peter Geis
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Peter Geis
      • [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Lee Jones
• [PATCH] Add support for the Digilent Arty-Z7 Xilinx ZYNQ based board   Christopher Bowman
• buildman failed on v2022.07-rc2 with toolchain-wrapper option   Patrick DELAUNAY
• Vulnerability Disclosure in net/   Nicolas Bidron
  • Vulnerability Disclosure in net/   Ramon Fried
    • Vulnerability Disclosure in net/   Matthias Brugger
    • Vulnerability Disclosure in net/   Fabio Estevam
      • Vulnerability Disclosure in net/   Michael Nazzareno Trimarchi
• [PATCH v2] Fix CVE-2022-30767 (old CVE-2019-14196)   Andrea zi0Black Cappa
  • [PATCH v2] Fix CVE-2022-30767 (old CVE-2019-14196)   Tom Rini
• PATCH] Add support for the Digilent Arty-Z7 Xilinx ZYNQ based board   Christopher Bowman
  • PATCH] Add support for the Digilent Arty-Z7 Xilinx ZYNQ based board   Michal Simek
• [PATCH 1/9] P1010RDB: Remove CONFIG_SPL_NAND_MINIMAL   Tom Rini
  • [PATCH 2/9] fsl-layerscape: Remove CONFIG_SPL_PBL_PAD   Tom Rini
  • [PATCH 3/9] spl: Remove CONFIG_SPL_SATA_BOOT_DEVICE   Tom Rini
  • [PATCH 4/9] Convert CONFIG_SYS_FLASH_CFI_WIDTH to Kconfig   Tom Rini
  • [PATCH 5/9] Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to Kconfig   Tom Rini
  • [PATCH 6/9] Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig   Tom Rini
  • [PATCH 7/9] Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig   Tom Rini
  • [PATCH 8/9] Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to Kconfig   Tom Rini
  • [PATCH 9/9] Convert CONFIG_SPL_PAD_TO et al to Kconfig   Tom Rini
• [PATCH v2] cmd: bootefi: restore ability to boot arbitrary blob   AKASHI Takahiro
  • [PATCH v2] cmd: bootefi: restore ability to boot arbitrary blob   Heinrich Schuchardt
• [PATCH] MAINTAINERS: aspeed: Add more files and myself as a reviewer   Joel Stanley
  • [PATCH] MAINTAINERS: aspeed: Add more files and myself as a reviewer   ChiaWei Wang
  • [PATCH] MAINTAINERS: aspeed: Add more files and myself as a reviewer   Tom Rini
• [PATCH 1/1] riscv: Clean up asm/io.h   Leo Yu-Chi Liang
  • [PATCH 1/1] riscv: Clean up asm/io.h   Bin Meng
• [PATCH] drivers:optee:rpmb: initialize drivers of mmc devices in UCLASS_BLK for rpmb access   Judy Wang
• [PATCH 1/2] board: stm32mp1: convert to livetree   Patrick Delaunay
  • [PATCH 2/2] board: engicam: stm32mp1: convert to livetree   Patrick Delaunay
    • [PATCH 2/2] board: engicam: stm32mp1: convert to livetree   Patrice CHOTARD
  • [PATCH 1/2] board: stm32mp1: convert to livetree   Patrice CHOTARD
• VMWare crashes with U-boot EFI Payload   Sean Nyekjaer
• [PATCH v2, 1/1] riscv: Clean up asm/io.h   Leo Yu-Chi Liang
• [PATCH] fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ   Rasmus Villemoes
  • [PATCH] fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ   Aswath Govindraju
    • [PATCH] fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ   Rasmus Villemoes
      • [PATCH] fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ   Aswath Govindraju
      • [PATCH] fdtdec: drop needlessly convoluted CONFIG_PHANDLE_CHECK_SEQ   Rasmus Villemoes
• [PATCH] board: turris: Find atsha device by atsha driver   Pali Rohár
  • [PATCH] board: turris: Find atsha device by atsha driver   Stefan Roese
    • [PATCH] board: turris: Find atsha device by atsha driver   Pali Rohár
• [PATCH v2 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+   Josua Mayer
  • [PATCH v2 1/5] phy: adin: fix broken support for adi, phy-mode-override   Josua Mayer
  • [PATCH v2 2/5] phy: adin: add support for clock output   Josua Mayer
  • [PATCH v2 3/5] ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses   Josua Mayer
    • [PATCH v2 3/5] ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses   Mark Kettenis
      • [PATCH v2 3/5] ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses   Josua Mayer
  • [PATCH v2 4/5] mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS   Josua Mayer
    • [PATCH v2 4/5] mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS   Josua Mayer
  • [PATCH v2 5/5] mx6cuboxi: enable driver for adin1300 phy   Josua Mayer
• [PATCH 0/8] ARM: imx: Add support for iMX6QDL DHCOM DRC02 and DH picoITX   Philip Oberfichtner
  • [PATCH 1/8] ARM: imx6: Fix broken DT path in DH board file   Philip Oberfichtner
    • [PATCH 1/8] ARM: imx6: Fix broken DT path in DH board file   Marek Vasut
  • [PATCH 2/8] ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux   Philip Oberfichtner
  • [PATCH 3/8] ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux   Philip Oberfichtner
  • [PATCH 4/8] ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header   Philip Oberfichtner
  • [PATCH 5/8] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards   Philip Oberfichtner
    • [PATCH 5/8] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards   Marek Vasut
  • [PATCH 6/8] ARM: dts: imx: Configure FEC for iMX6QDL picoITX   Philip Oberfichtner
    • [PATCH 6/8] ARM: dts: imx: Configure FEC for iMX6QDL picoITX   Marek Vasut
  • [PATCH 7/8] ARM: dts: imx: Configure FEC for iMX6QDL DRC02   Philip Oberfichtner
    • [PATCH 7/8] ARM: dts: imx: Configure FEC for iMX6QDL DRC02   Marek Vasut
  • [PATCH 8/8] ARM: imx6: Adapt device tree selection in DH board file   Philip Oberfichtner
    • [PATCH 8/8] ARM: imx6: Adapt device tree selection in DH board file   Fabio Estevam
    • [PATCH 8/8] ARM: imx6: Adapt device tree selection in DH board file   Marek Vasut
• [PATCH v6] bosch: Add initial board support for ACC   Philip Oberfichtner
  • [PATCH v6] bosch: Add initial board support for ACC   sbabic at denx.de
• [PATCH 1/3] imx8mm-cl-iot-gate: Enable cache in SPL   Fabio Estevam
  • [PATCH 2/3] cgtqmx8: Enable cache in SPL   Fabio Estevam
    • [PATCH 2/3] cgtqmx8: Enable cache in SPL   sbabic at denx.de
  • [PATCH 3/3] imx8mp_rsb3720a1: Enable cache in SPL   Fabio Estevam
    • [PATCH 3/3] imx8mp_rsb3720a1: Enable cache in SPL   sbabic at denx.de
  • [PATCH 1/3] imx8mm-cl-iot-gate: Enable cache in SPL   Michael Nazzareno Trimarchi
  • [PATCH 1/3] imx8mm-cl-iot-gate: Enable cache in SPL   sbabic at denx.de
• [PATCH] usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery   Fabio Estevam
  • [PATCH] usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery   Michael Nazzareno Trimarchi
• [PATCH] phy: Fix phy_string_for_interface() function   Pali Rohár
  • [PATCH] phy: Fix phy_string_for_interface() function   Vladimir Oltean
    • [PATCH] phy: Fix phy_string_for_interface() function   Pali Rohár
• [PATCH v1] fdt: Add U-Boot version to chosen node   Francesco Dolcini
  • [PATCH v1] fdt: Add U-Boot version to chosen node   Francesco Dolcini
    • [PATCH v1] fdt: Add U-Boot version to chosen node   Tom Rini
      • [PATCH v1] fdt: Add U-Boot version to chosen node   Marcel Ziswiler
      • [PATCH v1] fdt: Add U-Boot version to chosen node   Tom Rini
• [PATCH v2 0/3] stm32mp: prepare RCC support for STM32MP13   Patrick Delaunay
  • [PATCH v2 1/3] clk: Add directory for STM32 clock drivers   Patrick Delaunay
    • [PATCH v2 1/3] clk: Add directory for STM32 clock drivers   Patrice CHOTARD
    • [PATCH v2 1/3] clk: Add directory for STM32 clock drivers   Grzegorz Szymaszek
  • [PATCH v2 3/3] ARM: dts: stm32: add rcc node for STM32MP13   Patrick Delaunay
    • [PATCH v2 3/3] ARM: dts: stm32: add rcc node for STM32MP13   Patrice CHOTARD
• [PATCH v2 2/3] misc: stm32mp13: introduce STM32MP13 RCC driver   Patrick Delaunay
  • [PATCH v2 2/3] misc: stm32mp13: introduce STM32MP13 RCC driver   Patrice CHOTARD
• [RFC PATCH 1/2] board: dhelectronics: stm32mp1: convert to livetree   Patrick Delaunay
  • [RFC PATCH 2/2] ARM: stm32: activate OF_LIVE for DHSOM   Patrick Delaunay
    • [RFC PATCH 2/2] ARM: stm32: activate OF_LIVE for DHSOM   Marek Vasut
  • [RFC PATCH 1/2] board: dhelectronics: stm32mp1: convert to livetree   Marek Vasut
• [PATCH] pci: Handle failed calloc in decode_regions()   Pierre-Clément Tosi
  • [PATCH] pci: Handle failed calloc in decode_regions()   Stefan Roese
• [PATCH] cmd/bootefi: correct command syntax   Heinrich Schuchardt
• [PATCH] usb: dwc3: Fix support for usb3-phy PHY configuration   Marek Vasut
  • [PATCH] usb: dwc3: Fix support for usb3-phy PHY configuration   Michal Simek
• [PATCH] ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2   Marek Vasut
• [PATCH v2 2/2] pmic: pca9450: Add regulator driver   Tim Harvey
  • [PATCH v2 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
  • [PATCH v2 2/2] pmic: pca9450: Add regulator driver   Stefano Babic
    • [PATCH v2 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
      • [PATCH v2 2/2] pmic: pca9450: Add regulator driver   Stefano Babic
• [PATCH] bootm: Fix Linux silent console on newer kernels   Sean Anderson
• [PATCH v3 0/2] boot: don't enable the non-secure boot commands by default if secure boot enabled   Rover Mo
• [PATCH v3 1/2] boot: don't enable the non-secure boot commands by default if secure boot enabled   Rover Mo
  • Re: [PATCH v3 1/2] boot: don't enable the non-secure boot commands by default if secure boot enabled   Heinrich Schuchardt
    • [PATCH v3 1/2] boot: don't enable the non-secure boot commands by default if secure boot enabled   Rover Mo
• [PATCH v3 2/2] boot: build arch/*/lib/bootm.c if support boot linux   Rover Mo
  • [PATCH v3 2/2] boot: build arch/*/lib/bootm.c if support boot linux   Bin Meng
• [PATCH v3 1/2] pmic: pca9450: Add upstream regulators subnode match   Marek Vasut
  • [PATCH v3 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
    • [PATCH v3 2/2] pmic: pca9450: Add regulator driver   sbabic at denx.de
  • [PATCH v3 1/2] pmic: pca9450: Add upstream regulators subnode match   sbabic at denx.de
• [PATCH v6 00/25] Add support for MediaTek MT7621 SoC - v6   Weijie Gao
  • [PATCH v6 02/25] mips: add more definitions for asm/cm.h   Weijie Gao
  • [PATCH v6 03/25] mips: add __image_copy_len for SPL linker script   Weijie Gao
  • [PATCH v6 04/25] mips: add support for noncached_alloc()   Weijie Gao
  • [PATCH v6 05/25] mips: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 06/25] mips: mtmips: add two reference boards for mt7621   Weijie Gao
  • [PATCH v6 07/25] doc: mediatek: add documentation for mt7621 reference boards   Weijie Gao
  • [PATCH v6 08/25] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 09/25] reset: mtmips: add reset controller support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 10/25] pinctrl: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 11/25] usb: xhci-mtk: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 12/25] phy: mtk-tphy: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 13/25] spi: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 14/25] gpio: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 15/25] watchdog: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 16/25] mmc: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 17/25] net: mediatek: remap iobase address   Weijie Gao
  • [PATCH v6 18/25] net: mediatek: use regmap api to modify ethsys registers   Weijie Gao
  • [PATCH v6 19/25] net: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 20/25] nand: raw: add support for MediaTek MT7621 SoC   Weijie Gao
  • [PATCH v6 21/25] spl: allow using nand base without standard nand driver   Weijie Gao
  • [PATCH v6 22/25] spl: spl_legacy: fix the use of SPL_COPY_PAYLOAD_ONLY   Weijie Gao
  • [PATCH v6 23/25] spl: nand: support loading legacy image with payload compressed   Weijie Gao
  • [PATCH v6 24/25] tools: mtk_image: add support for MT7621 NAND images   Weijie Gao
  • [PATCH v6 25/25] MAINTAINERS: update maintainer for MediaTek MIPS platform   Weijie Gao
• [PATCH v6 01/25] mips: add asm/mipsmtregs.h for MIPS multi-threading   Weijie Gao
• [PATCH] arm64: mvebu: handle non-zero base address for RAM   Chris Packham
  • [PATCH] arm64: mvebu: handle non-zero base address for RAM   Stefan Roese
• [PULL] Pull request for u-boot master / v2022.07 = u-boot-stm32-20220520   Patrick DELAUNAY
  • [PULL] Pull request for u-boot master / v2022.07 = u-boot-stm32-20220520   Tom Rini
• [PATCH 4/4] ARM: imx: imx5: Introduce and use UART_BASE_ADDR(n)   Stefano Babic
  • [PATCH 4/4] ARM: imx: imx5: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
    • [PATCH 4/4] ARM: imx: imx5: Introduce and use UART_BASE_ADDR(n)   Stefano Babic
      • [PATCH 4/4] ARM: imx: imx5: Introduce and use UART_BASE_ADDR(n)   Stefano Babic
• [PATCH v2 0/8] ARM: imx: Add support for iMX6QDL DHCOM DRC02 and DH picoITX   Philip Oberfichtner
  • [PATCH v2 1/8] ARM: imx6: Fix broken DT path in DH board file   Philip Oberfichtner
    • [PATCH v2 1/8] ARM: imx6: Fix broken DT path in DH board file   sbabic at denx.de
  • [PATCH v2 2/8] ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux   Philip Oberfichtner
    • [PATCH v2 2/8] ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux   sbabic at denx.de
  • [PATCH v2 3/8] ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux   Philip Oberfichtner
    • [PATCH v2 3/8] ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux   sbabic at denx.de
  • [PATCH v2 4/8] ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header   Philip Oberfichtner
    • [PATCH v2 4/8] ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header   sbabic at denx.de
  • [PATCH v2 5/8] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards   Philip Oberfichtner
    • [PATCH v2 5/8] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards   sbabic at denx.de
  • [PATCH v2 6/8] ARM: dts: imx: Configure FEC for iMX6QDL picoITX   Philip Oberfichtner
    • [PATCH v2 6/8] ARM: dts: imx: Configure FEC for iMX6QDL picoITX   sbabic at denx.de
  • [PATCH v2 7/8] ARM: dts: imx: Configure FEC for iMX6QDL DRC02   Philip Oberfichtner
    • [PATCH v2 7/8] ARM: dts: imx: Configure FEC for iMX6QDL DRC02   sbabic at denx.de
  • [PATCH v2 8/8] ARM: imx6: Adapt device tree selection in DH board file   Philip Oberfichtner
    • [PATCH v2 8/8] ARM: imx6: Adapt device tree selection in DH board file   Marek Vasut
    • [PATCH v2 8/8] ARM: imx6: Adapt device tree selection in DH board file   sbabic at denx.de
  • [PATCH v2 0/8] ARM: imx: Add support for iMX6QDL DHCOM DRC02 and DH picoITX   Fabio Estevam
• [PATCH v2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Stefano Babic
  • [PATCH v2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Marek Vasut
    • [PATCH v2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Stefano Babic
      • [PATCH v2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
• [PATCH v3 1/3] arm: mvebu: dts: sync DTS   Robert Marko
  • [PATCH v3 2/3] arm: mvebu: add support for Methode eDPU   Robert Marko
    • [PATCH v3 2/3] arm: mvebu: add support for Methode eDPU   Pali Rohár
      • [PATCH v3 2/3] arm: mvebu: add support for Methode eDPU   Robert Marko
  • [PATCH v3 3/3] MAINTAINERS: add myself as Methode maintainer   Robert Marko
• [PATCH] include/configs: Remove rootwait=1 to all the affected boards   Michael Trimarchi
  • [PATCH] include/configs: Remove rootwait=1 to all the affected boards   Tommaso Merciai
• [PATCH v4 1/3] arm: mvebu: dts: sync DTS   Robert Marko
  • [PATCH v4 2/3] arm: mvebu: add support for Methode eDPU   Robert Marko
  • [PATCH v4 3/3] MAINTAINERS: add myself as Methode maintainer   Robert Marko
    • [PATCH v4 3/3] MAINTAINERS: add myself as Methode maintainer   Stefan Roese
      • [PATCH v4 3/3] MAINTAINERS: add myself as Methode maintainer   Robert Marko
      • [PATCH v4 3/3] MAINTAINERS: add myself as Methode maintainer   Stefan Roese
• [PATCH] common/board_r.c: drop legacy and unused bi_enetaddr   Rasmus Villemoes
  • [PATCH] common/board_r.c: drop legacy and unused bi_enetaddr   Tom Rini
• [PATCH] riscv: cpu: set gp before board_init_f_init_reserve   Nikita Shubin
• [PATCH v5 1/3] arm: mvebu: dts: sync DTS   Robert Marko
  • [PATCH v5 2/3] arm: mvebu: add support for Methode eDPU   Robert Marko
    • [PATCH v5 2/3] arm: mvebu: add support for Methode eDPU   Stefan Roese
    • [PATCH v5 2/3] arm: mvebu: add support for Methode eDPU   Pali Rohár
      • [PATCH v5 2/3] arm: mvebu: add support for Methode eDPU   Robert Marko
      • [PATCH v5 2/3] arm: mvebu: add support for Methode eDPU   Pali Rohár
  • [PATCH v5 3/3] MAINTAINERS: add myself as Methode maintainer   Robert Marko
    • [PATCH v5 3/3] MAINTAINERS: add myself as Methode maintainer   Stefan Roese
  • [PATCH v5 1/3] arm: mvebu: dts: sync DTS   Stefan Roese
• [PATCH] arm: dts: k3-am642-*: Mark the memory node with u-boot, dm-spl   Georgi Vlaev
  • [PATCH] arm: dts: k3-am642-*: Mark the memory node with u-boot,dm-spl   Tom Rini
  • [PATCH] arm: dts: k3-am642-*: Mark the memory node with u-boot, dm-spl   Tom Rini
• [PATCH 06/12] ARM: dts: sun9i: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 3/4] ARM: imx: imx31: Introduce and use UART_BASE_ADDR(n)   sbabic at denx.de
• [PATCH] board: gateworks: gw_ventana: add support for GPY111 PHY   sbabic at denx.de
• [PATCH] imx8m: fix reading of DDR4 MR registers   sbabic at denx.de
• [PATCH v3 1/2] imx8mn_ddr4_evk: Add USB Mass Storage support   sbabic at denx.de
• [PATCH] board: gateworks: gw_ventana: remove obsolete file   sbabic at denx.de
• [PATCH 2/2] mx6sllevk: Remove duplicated "mmc dev" command   sbabic at denx.de
• [PATCH 2/4] ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n)   sbabic at denx.de
• [PATCH] ARM: dts: imx: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC   sbabic at denx.de
• [PATCH v2] mtd: rawnand: mxs_nand: Fix use_minimum_ecc for spl driver   sbabic at denx.de
• [PATCH] configs: imx8mp_venice: add FEC_QUIRK_ENET_MAC   sbabic at denx.de
• [PATCH 3/4] imx: bootaux: get stack from elf file   sbabic at denx.de
• [PATCH] board: gateworks: venice: enable SPL_DM_SERIAL   sbabic at denx.de
• [PATCH 4/4] imx: imx8m: add rproc_att   sbabic at denx.de
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   sbabic at denx.de
• [PATCH 1/2] mx6slevk: Remove duplicated "mmc dev" command   sbabic at denx.de
• [PATCH] configs: remove FEC_QUIRK_ENET_MAC from imx8m configs   sbabic at denx.de
• [PATCH 1/4] imx: bootaux: cleanup code   sbabic at denx.de
• [PATCH v2] i.MX8 crypto/fsl: Enable fsl CAAM rng driver   sbabic at denx.de
• [PATCH 2/4] imx: bootaux: add missing newline   sbabic at denx.de
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   sbabic at denx.de
• [PATCH 07/12] ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 11/12] ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH V4 0/8] arm64: binman: use binman symbols for imx   Peng Fan (OSS)
  • [PATCH V4 1/8] spl: guard u_boot_any with X86   Peng Fan (OSS)
    • [PATCH V4 1/8] spl: guard u_boot_any with X86   Tom Rini
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Peng Fan
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Tom Rini
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Alper Nebi Yasak
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Tom Rini
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Alper Nebi Yasak
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Peng Fan (OSS)
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Peng Fan (OSS)
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Tom Rini
      • [PATCH V4 1/8] spl: guard u_boot_any with X86   Alper Nebi Yasak
    • [PATCH V4 1/8] spl: guard u_boot_any with X86   Alper Nebi Yasak
  • [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
    • [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name   Alper Nebi Yasak
      • [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
      • [PATCH V4 2/8] arm: dts: imx8m: update binman ddr firmware node name   Alper Nebi Yasak
  • [PATCH V4 3/8] imx: imx8mm-icore: migrate to use BINMAN   Peng Fan (OSS)
    • [PATCH V4 3/8] imx: imx8mm-icore: migrate to use BINMAN   Alper Nebi Yasak
      • [PATCH V4 3/8] imx: imx8mm-icore: migrate to use BINMAN   Peng Fan (OSS)
  • [PATCH V4 4/8] armv8: u-boot-spl.lds: mark __image_copy_start as symbol   Peng Fan (OSS)
    • [PATCH V4 4/8] armv8: u-boot-spl.lds: mark __image_copy_start as symbol   Tom Rini
  • [PATCH V4 5/8] tools: binman: section: replace @ with -   Peng Fan (OSS)
    • [PATCH V4 5/8] tools: binman: section: replace @ with -   Alper Nebi Yasak
      • [PATCH V4 5/8] tools: binman: section: replace @ with -   Peng Fan (OSS)
  • [PATCH V4 6/8] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
    • [PATCH V4 6/8] ddr: imx8m: helper: load ddr firmware according to binman symbols   Alper Nebi Yasak
      • [PATCH V4 6/8] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
  • [PATCH V4 7/8] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
    • [PATCH V4 7/8] arm: dts: imx8m: shrink ddr firmware size to actual file size   Alper Nebi Yasak
      • [PATCH V4 7/8] arm: dts: imx8m: shrink ddr firmware size to actual file size   Michael Nazzareno Trimarchi
  • [PATCH V4 8/8] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Peng Fan (OSS)
    • [PATCH V4 8/8] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Alper Nebi Yasak
      • [PATCH V4 8/8] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Peng Fan (OSS)
• [PATCH 12/12] ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH] configs: imx8mp_venice: remove unnecessary FEC_QUIRK_ENET_MAC   Tim Harvey
• [PATCH 05/12] ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH] board: gateowrks: venice: add GW7903 PMIC   Tim Harvey
  • [PATCH] board: gateowrks: venice: add GW7903 PMIC   Fabio Estevam
• [PATCH] arm: dts: imx8mm-venice-gw700x: add support for GPY111 phy   Tim Harvey
• [PATCH v2 00/16] stm32mp: add STM32MP13x support   Patrick Delaunay
  • [PATCH v2 01/16] ARM: dts: stm32: add STM32MP13 SoCs support   Patrick Delaunay
  • [PATCH v2 02/16] configs: stm32mp1: move SUPPORT_SPL in STM32MP15x   Patrick Delaunay
  • [PATCH v2 03/16] arm: stm32mp: move the get_otp helper function in bsec   Patrick Delaunay
  • [PATCH v2 04/16] arm: stm32mp: move code for STM32MP15x   Patrick Delaunay
  • [PATCH v2 05/16] arm: stm32mp: add choice for STM32MP SOC family   Patrick Delaunay
  • [PATCH v2 06/16] arm: stm32mp: add sub config Kconfig.15x   Patrick Delaunay
  • [PATCH v2 07/16] arm: stm32mp: add CONFIG_STM32MP15_PWR   Patrick Delaunay
    • [PATCH v2 07/16] arm: stm32mp: add CONFIG_STM32MP15_PWR   Patrice CHOTARD
  • [PATCH v2 08/16] arm: stm32mp: add support of STM32MP13x   Patrick Delaunay
    • [PATCH v2 08/16] arm: stm32mp: add support of STM32MP13x   Patrice CHOTARD
  • [PATCH v2 09/16] arm: stm32mp: support 2 MAC address for STM32MP13   Patrick Delaunay
  • [PATCH v2 10/16] pinctrl: stm32: add support of STM32MP135   Patrick Delaunay
  • [PATCH v2 11/16] board: stm32pm1: add stm32mp13 board support   Patrick Delaunay
    • [PATCH v2 11/16] board: stm32pm1: add stm32mp13 board support   Patrice CHOTARD
  • [PATCH v2 12/16] ram: stm32mp1: add support of STM32MP13x   Patrick Delaunay
  • [PATCH v2 13/16] mmc: stm32_sdmmc2: make reset property optional   Patrick Delaunay
  • [PATCH v2 14/16] arm: dts: stm32mp: add stm32mp13 device tree for U-Boot   Patrick Delaunay
  • [PATCH v2 15/16] configs: add stm32mp13 defconfig   Patrick Delaunay
  • [PATCH v2 16/16] doc: st: stm32mp1: add STM32MP13x support   Patrick Delaunay
    • [PATCH v2 16/16] doc: st: stm32mp1: add STM32MP13x support   Patrice CHOTARD
• [PATCH] stm32mp1: fix reference for STMicroelectronics   Patrick Delaunay
  • [PATCH] stm32mp1: fix reference for STMicroelectronics   Heiko Schocher
• [PATCH] configs: get rid of build warnings due to SPL_USB_DWC3_GENERIC   Angus Ainslie
• [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Christoph Fritz
  • [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Stefano Babic
  • [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   sbabic at denx.de
• [PATCH v1] board: apalis_t30/tk1/colibri_t20/t30: integrate mac address via dt   Marcel Ziswiler
  • [PATCH v1] board: apalis_t30/tk1/colibri_t20/t30: integrate mac address via dt   Marcel Ziswiler
    • [PATCH v1] board: apalis_t30/tk1/colibri_t20/t30: integrate mac address via dt   Tom Warren
• [PATCH v2] ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2   Marek Vasut
  • [PATCH v2] ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2   sbabic at denx.de
• [PATCH] arm: socfpga: Add the terasic de10-standard board   Humberto Naves
  • [PATCH] arm: socfpga: Add the terasic de10-standard board   Marek Vasut
    • [PATCH] arm: socfpga: Add the terasic de10-standard board   Humberto Naves
    • [PATCH] arm: socfpga: Add the terasic de10-standard board   Marek Vasut
      • [PATCH v2] arm: socfpga: Add the terasic de10-standard board   Humberto Naves
      • [PATCH v2] arm: socfpga: Add the terasic de10-standard board   Marek Vasut
      • [PATCH v2] arm: socfpga: Add the terasic de10-standard board   Humberto Naves
• [PATCH] board: freescale: Update MAINTAINERS List   Wasim Khan
  • [PATCH] board: freescale: Update MAINTAINERS List   Tom Rini
• [PATCH] cmd: cat: add new command   Roger Knecht
• [PATCH V2] include/configs: Remove rootwait=1 to all the affected boards   Michael Trimarchi
  • [PATCH V2] include/configs: Remove rootwait=1 to all the affected boards   Heiko Schocher
• Raspberry Pi won’t boot from compressed subvolume (BTRFS)   Nathan Henrie
  • Re: Raspberry Pi won’t boot from compressed subvolume (BTRFS)   Matthias Brugger
    • Re: Raspberry Pi won’t boot from compressed subvolume (BTRFS)   Nathan Henrie
• [PATCH 09/12] ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 10/12] ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 08/12] ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1   Andre Przywara
• [v3 00/11] Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [v3 03/11] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
    • [v3 03/11] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [v3 04/11] configs: aspeed: Enable SPI flash features   Chin-Ting Kuo
  • [v3 05/11] MAINTAINERS: Add ASPEED SPI driver file   Chin-Ting Kuo
  • [v3 06/11] arm: dts: aspeed: Update SPI flash node settings   Chin-Ting Kuo
  • [v3 07/11] spi-mem: Add dirmap API from Linux   Chin-Ting Kuo
  • [v3 08/11] mtd: spi-nor: Use spi-mem dirmap API   Chin-Ting Kuo
  • [v3 09/11] spi: aspeed: SPI dirmap read support   Chin-Ting Kuo
  • [v3 10/11] configs: aspeed: Enable CONFIG_SPI_DIRMAP   Chin-Ting Kuo
  • [v3 11/11] mtd: spi-nor-ids: Add Winbond W25Q512JV ID   Chin-Ting Kuo
• [v3 01/11] clk: aspeed: Get HCLK frequency support   Chin-Ting Kuo
• [v3 02/11] pinctrl: aspeed: FWSPICS1 and SPI1CS1 pin support   Chin-Ting Kuo
• [PATCH] net: Add missing PCI dependency for CONFIG_E1000   Pali Rohár
  • [PATCH] net: Add missing PCI dependency for CONFIG_E1000   Ramon Fried
  • [PATCH] net: Add missing PCI dependency for CONFIG_E1000   Sean Anderson
    • [PATCH] net: Add missing PCI dependency for CONFIG_E1000   Pali Rohár
      • [PATCH] net: Add missing PCI dependency for CONFIG_E1000   Sean Anderson
      • [PATCH] net: Add missing PCI dependency for CONFIG_E1000   Tom Rini
• [PATCH v2 0/3] usb: add isp1760 hcd support   Rui Miguel Silva
  • [PATCH v2 1/3] usb: common: move urb code to common   Rui Miguel Silva
  • [PATCH v2 2/3] usb: add isp1760 family driver   Rui Miguel Silva
  • [PATCH v2 3/3] corstone1000: enable isp1763 usb controller and mmc   Rui Miguel Silva
• [PATCH 1/2] arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals   Pali Rohár
  • [PATCH 1/2] arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals   Stefan Roese
• [PATCH 2/2] arm: mvebu: a3720: Add NVMe to BOOT_TARGET_DEVICES list   Pali Rohár
  • [PATCH 2/2] arm: mvebu: a3720: Add NVMe to BOOT_TARGET_DEVICES list   Stefan Roese
• dwc_eth_qos driver for tegra   Rasmus Villemoes
  • dwc_eth_qos driver for tegra   Marek Vasut
    • dwc_eth_qos driver for tegra   Rasmus Villemoes
      • dwc_eth_qos driver for tegra   Marek Vasut
• Pull request: u-boot-imx u-boot-imx-20220523   Stefano Babic
  • Pull request: u-boot-imx u-boot-imx-20220523   Tom Rini
• [PATCH resend 1/2] imx: imx8mq: default select CLK_IMX8MQ   Peng Fan (OSS)
  • [PATCH resend 2/2] imx: imx8mq: select CONFIG_CMD_CLK   Peng Fan (OSS)
• [PATCH v1 0/8] Add support for the i.MXRT1170   Stefano Babic
• [PATCH] riscv: fix compitible with binutils 2.38   Coelacanthus
• [PATCH 00/22] imx: patches in queue   Peng Fan (OSS)
  • [PATCH 01/22] imx: drop CONFIG_MXC_UART_BASE   Peng Fan (OSS)
  • [PATCH 02/22] imx: imx8m[m/n/p]_venice: Enable SPL_DM_SERIAL   Peng Fan (OSS)
    • [PATCH 02/22] imx: imx8m[m/n/p]_venice: Enable SPL_DM_SERIAL   Tim Harvey
  • [PATCH 03/22] imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIAL   Peng Fan (OSS)
  • [PATCH 04/22] imx: imx8mm-cl-iot-gate: Enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH 05/22] imx: imx8mm_icore: Enable SPL_DM_SERIAL   Peng Fan (OSS)
  • [PATCH 06/22] imx: imx8m[m/p]_phycore: Enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH 07/22] imx: imx8mn_var_som: enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH 08/22] imx: kontron-sl-mx8mm: enable DM_SERIAL   Peng Fan (OSS)
  • [PATCH 09/22] configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE   Peng Fan (OSS)
  • [PATCH 10/22] configs: imx8m: use common imx8m.h for i.MX8MM   Peng Fan (OSS)
  • [PATCH 11/22] configs: imx8m: use common imx8m.h for i.MX8MN   Peng Fan (OSS)
  • [PATCH 12/22] configs: imx8m: use common imx8m.h for i.MX8MP   Peng Fan (OSS)
  • [PATCH 13/22] configs: imx8m: use common imx8m.h for i.MX8MQ   Peng Fan (OSS)
  • [PATCH 14/22] imx: imx8mm_beacon: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 15/22] imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 16/22] imx: engicam-imx8mm: drop unused macro   Peng Fan (OSS)
  • [PATCH 17/22] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 18/22] imx: imx8mn-beacon: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 19/22] imx: imx8mn_var_som: clean up board watchdog code   Peng Fan (OSS)
  • [PATCH 20/22] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL   Peng Fan (OSS)
  • [PATCH 21/22] imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL   Peng Fan (OSS)
  • [PATCH 22/22] imx: phycore_imx8mm/p: clean up board watchdog code   Peng Fan (OSS)
• [PATCH v4 1/3] spi: spi-uclass: Add new spi_get_bus_and_cs() implementation   Tom Rini
• [PATCH v4 2/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Tom Rini
• [PATCH v4 3/3] test: dm: spi: Replace _spi_get_bus_and_cs() by spi_get_bus_and_cs() in some case   Tom Rini
• [PATCH v3 0/8] Add MV88E61xx DSA driver and use on gwventana   Tim Harvey
  • [PATCH v3 1/8] net: mdio-uclass: scan for dm mdio children on post-bind   Tim Harvey
  • [PATCH v3 2/8] net: dsa: move cpu port probe to dsa_post_probe   Tim Harvey
  • [PATCH v3 3/8] net: dsa: ensure dsa driver has proper ops   Tim Harvey
  • [PATCH v3 4/8] net: dsa: allow rcv() and xmit() to be optional   Tim Harvey
  • [PATCH v3 5/8] net: ksz9477: remove unnecessary xmit and recv functions   Tim Harvey
  • [PATCH v3 6/8] net: fec: add support for DM_MDIO   Tim Harvey
  • [PATCH v3 7/8] net: add MV88E61xx DSA driver   Tim Harvey
  • [PATCH v3 8/8] board: gw_ventana: enable MV88E61XX DSA support   Tim Harvey
• [PATCH 1/4] Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig   Tom Rini
• [PATCH 2/4] Convert CONFIG_SPL_SYS_MALLOC_SIMPLE to Kconfig   Tom Rini
• [PATCH 3/4] ppc / layerscape: Clean up CONFIG_SYS_CCSR_DO_NOT_RELOCATE usage   Tom Rini
• [PATCH 4/4] Convert CONFIG_SPL_COMMON_INIT_DDR to Kconfig   Tom Rini
• U-Boot v2022.07-rc2 regression: Bootmenu is completely broken   Pali Rohár
  • U-Boot v2022.07-rc2 regression: Bootmenu is completely broken   Tom Rini
    • U-Boot v2022.07-rc2 regression: Bootmenu is completely broken   Pali Rohár
      • U-Boot v2022.07-rc2 regression: Bootmenu is completely broken   Masahisa Kojima
      • U-Boot v2022.07-rc2 regression: Bootmenu is completely broken   Pali Rohár
• [PATCH 0/2] Rockchip: Add option to prevent boot on plug-in   Chris Morgan
  • [PATCH 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Chris Morgan
    • [PATCH 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Jaehoon Chung
    • [PATCH 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Kever Yang
  • [PATCH 2/2] rockchip: Add option to prevent booting on power plug-in   Chris Morgan
    • [PATCH 2/2] rockchip: Add option to prevent booting on power plug-in   Jaehoon Chung
• [ANN] U-Boot v2022.07-rc3 released   Tom Rini
• [PATCH] ubifs: Add missing dependency on GZIP   Pali Rohár
• [PATCH] ubifs: Fix reference count leak in ubifsumount   Pali Rohár
  • [PATCH v2] ubifs: Fix reference count leak in ubifsumount   Pali Rohár
• [PULL] u-boot-socfpga/master   Marek Vasut
  • [PULL] u-boot-socfpga/master   Tom Rini
• [PATCH] bootmenu: fix bootmenu title handling   Masahisa Kojima
  • [PATCH] bootmenu: fix bootmenu title handling   Pali Rohar
    • [PATCH] bootmenu: fix bootmenu title handling   Pali Rohar
      • [PATCH] bootmenu: fix bootmenu title handling   Masahisa Kojima
• [PATCH 1/3] riscv: sifive: unmatched: Adjust for big ramdisk image   Bin Meng
  • [PATCH 2/3] riscv: sifive: unleashed: Set kernel_comp_addr_r for compressed kernel   Bin Meng
    • [PATCH 2/3] riscv: sifive: unleashed: Set kernel_comp_addr_r for compressed kernel   Leo Liang
  • [PATCH 3/3] riscv: qemu: Set kernel_comp_addr_r for compressed kernel   Bin Meng
    • [PATCH 3/3] riscv: qemu: Set kernel_comp_addr_r for compressed kernel   Leo Liang
  • [PATCH 1/3] riscv: sifive: unmatched: Adjust for big ramdisk image   Leo Liang
• [v4 00/12] Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [v4 02/12] pinctrl: aspeed: FWSPICS1 and SPI1CS1 pin support   Chin-Ting Kuo
  • [v4 03/12] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
  • [v4 04/12] configs: aspeed: Enable SPI flash features   Chin-Ting Kuo
  • [v4 05/12] MAINTAINERS: Add ASPEED SPI driver file   Chin-Ting Kuo
  • [v4 06/12] arm: dts: aspeed: Update SPI flash node settings   Chin-Ting Kuo
  • [v4 07/12] spi-mem: Add dirmap API from Linux   Chin-Ting Kuo
  • [v4 08/12] mtd: spi-nor: Use spi-mem dirmap API   Chin-Ting Kuo
  • [v4 09/12] spi: aspeed: SPI dirmap read support   Chin-Ting Kuo
  • [v4 10/12] configs: aspeed: Enable CONFIG_SPI_DIRMAP   Chin-Ting Kuo
  • [v4 11/12] mtd: spi-nor-ids: Add Winbond W25Q512JV ID   Chin-Ting Kuo
  • [v4 12/12] spi: aspeed: Fix bug when SPI_NOR_4B_OPCODES flag is set   Chin-Ting Kuo
• [v4 01/12] clk: aspeed: Get HCLK frequency support   Chin-Ting Kuo
• [PATCH] arm: dts: socfpga: stratix10: Update MMC smplsel value   yau.wai.gan at intel.com
  • [PATCH] arm: dts: socfpga: stratix10: Update MMC smplsel value   Chee, Tien Fong
• [PATCH V5 0/9] arm64: binman: use binman symbols for imx   Peng Fan (OSS)
  • [PATCH V5 1/9] arm: dts: imx8m: update binman ddr firmware node name   Peng Fan (OSS)
    • [PATCH V5 1/9] arm: dts: imx8m: update binman ddr firmware node name   Alper Nebi Yasak
  • [PATCH V5 2/9] armv8: u-boot-spl.lds: mark __image_copy_start as symbol   Peng Fan (OSS)
  • [PATCH V5 3/9] tools: binman: section: replace @ with -   Peng Fan (OSS)
    • [PATCH V5 3/9] tools: binman: section: replace @ with -   Alper Nebi Yasak
  • [PATCH V5 4/9] binman: introduce no-u-boot-any property   Peng Fan (OSS)
    • [PATCH V5 4/9] binman: introduce no-u-boot-any property   Alper Nebi Yasak
  • [PATCH V5 5/9] arm: dts: imx8m: add no-u-boot-any property   Peng Fan (OSS)
  • [PATCH V5 6/9] ddr: imx8m: helper: load ddr firmware according to binman symbols   Peng Fan (OSS)
  • [PATCH V5 7/9] arm: dts: imx8m: shrink ddr firmware size to actual file size   Peng Fan (OSS)
  • [PATCH V5 8/9] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Peng Fan (OSS)
    • [PATCH V5 8/9] binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS   Alper Nebi Yasak
  • [PATCH V5 9/9] imx: imx8mm-icore: migrate to use BINMAN   Peng Fan (OSS)
• [PATCH v2] mmc: nuvoton: Add NPCM7xx mmc driver   Jim Liu
  • [PATCH v2] mmc: nuvoton: Add NPCM7xx mmc driver   Jaehoon Chung
• [PATCH v1] rng: nuvoton: Add NPCM7xx rng driver   Jim Liu
• [PATCH] arch: mvebu: Disable by default unused peripherals in SPL   Pali Rohár
  • [PATCH] arch: mvebu: Disable by default unused peripherals in SPL   Stefan Roese
    • [PATCH] arch: mvebu: Disable by default unused peripherals in SPL   Stefan Roese
      • [PATCH] arch: mvebu: Disable by default unused peripherals in SPL   Pali Rohár
• [PATCH] TPL: Do not allow enabling TPL symbols for non-TPL builds   Pali Rohár
• [PATCH 1/2] dt-bindings: sound: add microchip,pdmc.h   Eugen Hristev
  • [PATCH 2/2] ARM: dts: at91: sama7g5/sama7g5ek: sync with kernel at91 5.19   Eugen Hristev
• [PATCH] powerpc: dts: p2020: Define PMC node   Pali Rohár
• [PATCH] test: fix parsing the mksquashfs version number   Heinrich Schuchardt
  • [PATCH] test: fix parsing the mksquashfs version number   Tom Rini
• TPM tree pull request   Ilias Apalodimas
  • TPM tree pull request   Tom Rini
• [PATCH] clk: sunxi: h6_r: Correct the driver name   Andre Przywara
• [PATCH 1/2] sunxi: Skip MMC0 init when its pinmux conflicts with UART0   Andre Przywara
• [PATCH 2/2] mmc: sunxi: Remove unnecessary pinmux option dependency   Andre Przywara
• Pull request: u-boot-sunxi/master fixes for v2022.07   Andre Przywara
  • Pull request: u-boot-sunxi/master fixes for v2022.07   Tom Rini
• [PATCH] doc: environment: Fix typo   Chris Packham
  • [PATCH] doc: environment: Fix typo   Bin Meng
• [PATCH] mtd: spi-nor-ids: Add support for flashes tested by xilinx   Ashok Reddy Soma
• [PATCH 0/7] Add support for cyclic function execution infrastruture   Stefan Roese
  • [PATCH 1/7] time: Import time_after64() and friends from Linux   Stefan Roese
  • [PATCH 2/7] cyclic: Add basic support for cyclic function execution infrastruture   Stefan Roese
  • [PATCH 3/7] cyclic: Integrate cyclic infrastructure into WATCHDOG_RESET   Stefan Roese
  • [PATCH 4/7] cyclic: Integrate cyclic functionality at bootup in board_r/f   Stefan Roese
  • [PATCH 5/7] cyclic: Add 'cyclic list' command   Stefan Roese
  • [PATCH 6/7] sandbox: Add cyclic demo function   Stefan Roese
  • [PATCH 7/7] mips: octeon_nic23: Add PCIe FLR fixup via cyclic infrastructure   Stefan Roese
• [PATCH v2] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output   Marcel Ziswiler
• [PATCH v2 00/12] TI: Add support for AM62 SoC   Vignesh Raghavendra
  • [PATCH v2 02/12] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62   Vignesh Raghavendra
  • [PATCH v2 03/12] soc: ti: k3-socinfo: Add entry for AM62X SoC family   Vignesh Raghavendra
    • [PATCH v2 03/12] soc: ti: k3-socinfo: Add entry for AM62X SoC family   Tom Rini
  • [PATCH v2 04/12] arm: mach-k3: Introduce the basic files to support AM62   Vignesh Raghavendra
    • [PATCH v2 04/12] arm: mach-k3: Introduce the basic files to support AM62   Tom Rini
  • [PATCH v2 05/12] arm: mach-k3: am62: Introduce autogenerated SoC data   Vignesh Raghavendra
  • [PATCH v2 06/12] dma: ti: Add PSIL data for AM62x DMASS   Vignesh Raghavendra
  • [PATCH v2 07/12] firmware: ti_sci_static_data: add static DMA chan data   Vignesh Raghavendra
  • [PATCH v2 08/12] arm: dts: Introduce base AM62 SoC dtsi files   Vignesh Raghavendra
  • [PATCH v2 09/12] board: ti: Introduce the basic files to support AM62 SK board   Vignesh Raghavendra
    • [PATCH v2 09/12] board: ti: Introduce the basic files to support AM62 SK board   Tom Rini
  • [PATCH v2 10/12] arm: dts: Add support for AM62-SK   Vignesh Raghavendra
  • [PATCH v2 11/12] configs: Add configs for AM62x SK   Vignesh Raghavendra
  • [PATCH v2 12/12] doc: ti: Add readme for AM62x SK   Vignesh Raghavendra
    • [PATCH v2 12/12] doc: ti: Add readme for AM62x SK   Bryan Brattlof
• [PATCH v2 01/12] drivers: mmc: am654_sdhci: Add new compatible for AM62 SoC   Vignesh Raghavendra
  • [PATCH v2 01/12] drivers: mmc: am654_sdhci: Add new compatible for AM62 SoC   Jaehoon Chung
• [PATCH 0/2] fix issues in bootmenu after adding efi entries   Masahisa Kojima
  • [PATCH 1/2] bootmenu: use utf-8 for menu title   Masahisa Kojima
  • [PATCH 2/2] bootmenu: U-Boot console is enabled as default   Masahisa Kojima
    • [PATCH 2/2] bootmenu: U-Boot console is enabled as default   Michal Simek
      • [PATCH 2/2] bootmenu: U-Boot console is enabled as default   Masahisa Kojima
  • [PATCH 0/2] fix issues in bootmenu after adding efi entries   Pali Rohar
    • [PATCH 0/2] fix issues in bootmenu after adding efi entries   Masahisa Kojima
• [PATCH 1/2] doc/efi: add firmware management protocol to the documentation   Vincent Stehlé
  • [PATCH 2/2] efi: fix documentation warnings   Vincent Stehlé
    • [PATCH 2/2] efi: fix documentation warnings   Heinrich Schuchardt
  • [PATCH 1/2] doc/efi: add firmware management protocol to the documentation   Heinrich Schuchardt
• [PATCH 0/1] configs: imx8mm-cl-iot-gate: enable extension command   Ying-Chun Liu (PaulLiu)
  • [PATCH 1/1] configs: imx8mm-cl-iot-gate: enable extension command   Ying-Chun Liu (PaulLiu)
• [GIT PULL] xilinx patches for v2022.07-rc4   Michal Simek
  • [GIT PULL] xilinx patches for v2022.07-rc4   Tom Rini
• [PATCH v3 0/3] usb: add isp1760 hcd support   Rui Miguel Silva
  • [PATCH v3 1/3] usb: common: move urb code to common   Rui Miguel Silva
  • [PATCH v3 2/3] usb: add isp1760 family driver   Rui Miguel Silva
  • [PATCH v3 3/3] corstone1000: enable isp1763 usb controller and mmc   Rui Miguel Silva
• [Rock Pi 4+] Mainline LPDDR4 RAM initialisation is not sufficient to boot successfully   Lee Jones
• [PATCH] qfw: Don't fail if setup data size is 0   Pierre-Clément Tosi
• [PATCH v2] ARM: dts: sun4i: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH v2] board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h   Priyanka Jain (OSS)
  • [PATCH v2] board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h   Pali Rohár
    • [PATCH v3] board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h   Pali Rohár
• [PATCH v1 1/4] rockchip: usb: gadget: add rk3066 product id   Kever Yang
• [PATCH v1 2/4] rockchip: usb: phy: add rk3066/rk3188 support   Kever Yang
• [PATCH v1 3/4] rockchip: board: change condition board_usb_init() in function   Kever Yang
• [PATCH v1 4/4] arm: dts: rockchip: remove usb-phy fallback string for rk3188   Kever Yang
• [PATCH 1/1] doc/build/gcc: add more required packages   Heinrich Schuchardt
• Out of bounds write vulnerability in the sqfs_readdir() function   Jincheng Wang
• Pull request for efi-2022-07-rc4   Heinrich Schuchardt
  • Pull request for efi-2022-07-rc4   Masahisa Kojima
    • Pull request for efi-2022-07-rc4   Tom Rini
• [PATCH v2 0/2] fix issues in bootmenu after adding efi entries   Masahisa Kojima
  • [PATCH v2 1/2] bootmenu: use utf-8 for menu title   Masahisa Kojima
    • [PATCH v2 1/2] bootmenu: use utf-8 for menu title   Heinrich Schuchardt
      • [PATCH v2 1/2] bootmenu: use utf-8 for menu title   Masahisa Kojima
      • [PATCH v2 1/2] bootmenu: use utf-8 for menu title   Pali Rohar
  • [PATCH v2 2/2] bootmenu: U-Boot console is enabled as default   Masahisa Kojima
    • [PATCH v2 2/2] bootmenu: U-Boot console is enabled as default   Ilias Apalodimas
• [PATCH] powerpc: bootm: Fix sizes in memory adjusting warning   Pali Rohár
• [PATCH] net: Check for the minimum IP fragmented datagram size   Fabio Estevam
• [PATCH 01/11] m68k: Remove dead code   Tom Rini
  • [PATCH 02/11] arm: pxa: Remove CONFIG_CPU_PXA25X   Tom Rini
  • [PATCH 04/11] arm: Use CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR directly.   Tom Rini
  • [PATCH 06/11] m68k: Stop using CONFIG_SYS_GBL_DATA_OFFSET   Tom Rini
  • [PATCH 07/11] mpc85xx: Switch to setting the initial stack pointer more clearly   Tom Rini
  • [PATCH 08/11] powerpc: Switch to using CONFIG_SYS_INIT_SP_OFFSET from CONFIG_SYS_GBL_DATA_OFFSET   Tom Rini
  • [PATCH 09/11] stih410-b2260: Switch to using GENERATED_GBL_DATA_SIZE   Tom Rini
  • [PATCH 10/11] Introduce include/system-constants.h   Tom Rini
  • [PATCH 11/11] Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h   Tom Rini
• [PATCH 03/11] mvebu: Use CONFIG_SPL_STACK + 4 directly for bootparam location   Tom Rini
• [PATCH 05/11] arm: Stop using CONFIG_SYS_GBL_DATA_OFFSET   Tom Rini
• [PATCH 1/3] ARM: dts: at91: replace microchip, 24aa02e48 with atmel, at24c02   Eugen Hristev
  • [PATCH 2/3] misc: i2c_eeprom: remove 24aa02e48   Eugen Hristev
    • [PATCH 2/3] misc: i2c_eeprom: remove 24aa02e48   Michael Walle
    • [PATCH 2/3] misc: i2c_eeprom: remove 24aa02e48   Heiko Schocher
  • [PATCH 3/3] ARM: dts: at91: sam9x60ek: fix eeprom compatible   Eugen Hristev
    • [PATCH 3/3] ARM: dts: at91: sam9x60ek: fix eeprom compatible   Heiko Schocher
  • [PATCH 1/3] ARM: dts: at91: replace microchip,24aa02e48 with atmel,at24c02   Michael Walle
    • [PATCH 1/3] ARM: dts: at91: replace microchip,24aa02e48 with atmel,at24c02   Eugen.Hristev at microchip.com
      • [PATCH 1/3] ARM: dts: at91: replace microchip,24aa02e48 with atmel,at24c02   Heiko Schocher
• [PATCH v2] net: Check for the minimum IP fragmented datagram size   Fabio Estevam
  • [PATCH v2] net: Check for the minimum IP fragmented datagram size   Fabio Estevam
    • [PATCH v2] net: Check for the minimum IP fragmented datagram size   Fabio Estevam
• [PATCH v2 00/11] Add Chameleon v3 support   Paweł Anikiel
  • [PATCH v2 01/11] arm: dts: Add Mercury+ AA1 devicetrees   Paweł Anikiel
    • [PATCH v2 01/11] arm: dts: Add Mercury+ AA1 devicetrees   Simon Glass
  • [PATCH v2 02/11] arm: dts: Add Chameleonv3 handoff headers   Paweł Anikiel
    • [PATCH v2 02/11] arm: dts: Add Chameleonv3 handoff headers   Simon Glass
  • [PATCH v2 03/11] arm: dts: Add Chameleonv3 devicetrees   Paweł Anikiel
    • [PATCH v2 03/11] arm: dts: Add Chameleonv3 devicetrees   Simon Glass
  • [PATCH v2 04/11] board: Add Chameleonv3 board dir   Paweł Anikiel
    • [PATCH v2 04/11] board: Add Chameleonv3 board dir   Simon Glass
  • [PATCH v2 05/11] config: Add Chameleonv3 config   Paweł Anikiel
    • [PATCH v2 05/11] config: Add Chameleonv3 config   Simon Glass
  • [PATCH v2 06/11] misc: atsha204a: Increase wake delay by tWHI   Paweł Anikiel
    • [PATCH v2 06/11] misc: atsha204a: Increase wake delay by tWHI   Simon Glass
  • [PATCH v2 07/11] sysreset: socfpga: Use parent device for reading base address   Paweł Anikiel
    • [PATCH v2 07/11] sysreset: socfpga: Use parent device for reading base address   Simon Glass
  • [PATCH v2 08/11] socfpga: arria10: Replace delays with busy waiting in cm_full_cfg   Paweł Anikiel
    • [PATCH v2 08/11] socfpga: arria10: Replace delays with busy waiting in cm_full_cfg   Simon Glass
  • [PATCH v2 09/11] socfpga: arria10: Improve bitstream loading speed   Paweł Anikiel
    • [PATCH v2 09/11] socfpga: arria10: Improve bitstream loading speed   Simon Glass
      • [PATCH v2 09/11] socfpga: arria10: Improve bitstream loading speed   Paweł Anikiel
  • [PATCH v2 10/11] socfpga: arria10: Wait for fifo empty after writing bitstream   Paweł Anikiel
    • [PATCH v2 10/11] socfpga: arria10: Wait for fifo empty after writing bitstream   Simon Glass
  • [PATCH v2 11/11] socfpga: arria10: Allow dcache_enable before relocation   Paweł Anikiel
    • [PATCH v2 11/11] socfpga: arria10: Allow dcache_enable before relocation   Simon Glass
• [PATCH 1/2] mmc: Add support for wait_dat0 callback   Loic Poulain
  • [PATCH 1/2] mmc: Add support for wait_dat0 callback   Jaehoon Chung
• [PATCH 2/2] mmc: fsl_esdhc_imx: Implement wait_dat0 mmc ops   Loic Poulain
  • [PATCH 2/2] mmc: fsl_esdhc_imx: Implement wait_dat0 mmc ops   Jaehoon Chung
• [PATCH v3] net: Check for the minimum IP header total length   Fabio Estevam
  • [PATCH v3] net: Check for the minimum IP header total length   Michael Nazzareno Trimarchi
    • [PATCH v3] net: Check for the minimum IP header total length   Fabio Estevam
• [PATCH v1 0/8] Introduce HPE GXP Architecture   nick.hawkins at hpe.com
• [PATCH v1 1/8] timer: gxp: Add HPE GXP timer support   nick.hawkins at hpe.com
• [PATCH v1 0/9] Introduce HPE GXP Architecture   nick.hawkins at hpe.com
• [PATCH v1 1/9] ARM: hpe: gxp: add core support   nick.hawkins at hpe.com
  • [PATCH v1 2/9] timer: gxp: Add HPE GXP timer support   nick.hawkins at hpe.com
  • [PATCH v1 3/9] board: hpe: gxp: add HPE GXP soc support   nick.hawkins at hpe.com
  • [PATCH v1 4/9] dt-bindings: arm: hpe: add GXP Support   nick.hawkins at hpe.com
  • [PATCH v1 5/9] dt-bindings: timer: Add hpe gxp timer   nick.hawkins at hpe.com
  • [PATCH v1 6/9] ARM: dts: Add device tree files for hpe gxp soc   nick.hawkins at hpe.com
  • [PATCH v1 7/9] configs: gxp: add core support   nick.hawkins at hpe.com
  • [PATCH v1 8/9] configs: gxp: add gxp_defconfig   nick.hawkins at hpe.com
  • [PATCH v1 9/9] MAINTAINERS: Introduce HPE GXP Architecture   nick.hawkins at hpe.com
• [PATCH] usb: xhci-mtk: disable all ports when disable host controller   Chunfeng Yun
• [PULL] u-boot-riscv/master   Leo Liang
  • [PULL] u-boot-riscv/master   Tom Rini
    • [PULL] u-boot-riscv/master   Leo Liang
      • [PULL] u-boot-riscv/master   Tom Rini
• [PATCH] doc: sandbox: Add additional valgrind documentation   Sean Anderson
  • [PATCH] doc: sandbox: Add additional valgrind documentation   Heinrich Schuchardt
    • [PATCH] doc: sandbox: Add additional valgrind documentation   Sean Anderson
      • [PATCH] doc: sandbox: Add additional valgrind documentation   Heinrich Schuchardt
      • [PATCH] doc: sandbox: Add additional valgrind documentation   Sean Anderson
• imx8mm eLCDIF clock   Sean Anderson
• Fwd: dlmalloc hanging   Heinrich Schuchardt
  • Fwd: dlmalloc hanging   Oleksii Kurochko
• [PATCH v2] imx8m: fixup thermal trips   Andrejs Cainikovs
• [PATCH v2 1/2] doc: sandbox: Add additional valgrind documentation   Sean Anderson
• [PATCH v2 2/2] valgrind: Disable on Risc-V   Sean Anderson
• [PATCH v3 1/2] doc: sandbox: Add additional valgrind documentation   Sean Anderson
• [PATCH v3 2/2] valgrind: Disable on Risc-V   Sean Anderson
  • [PATCH v3 2/2] valgrind: Disable on Risc-V   Heinrich Schuchardt
• [PATCH] boot: pxe_utils: Do not use fdtcontroladdr for FIT Image format   Neil Armstrong
• Finding x86_setup among FIT configurations   Mike Crowe
• [PATCH v2] board: gateworks: venice: add GW7903 PMIC   Tim Harvey
  • [PATCH v2] board: gateworks: venice: add GW7903 PMIC   Jaehoon Chung
• [PATCH v2 0/2] Rockchip: Add option to prevent boot on plug-in   Chris Morgan
  • [PATCH v2 1/2] power: pmic: rk8xx: Support sysreset shutdown method   Chris Morgan
  • [PATCH v2 2/2] rockchip: Add option to prevent booting on power plug-in   Chris Morgan
    • [PATCH v2 2/2] rockchip: Add option to prevent booting on power plug-in   Jaehoon Chung
• [PATCH] serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE)   Pali Rohár
• BUG in u-boot for ODROID-XU3/XU4/HC1/HC2   Gabriel Hojda
• [PATCH v6 0/2] sf: Check protection before writing/erasing flash   Jan Kiszka
  • [PATCH v6 0/2] sf: Check protection before writing/erasing flash   Tom Rini
• [PATCH 00/12] IOT2050-related enhancements   Jan Kiszka
  • [PATCH 01/12] env: Complete generic support for writable list   Jan Kiszka
    • [PATCH 01/12] env: Complete generic support for writable list   Marek Vasut
      • [PATCH 01/12] env: Complete generic support for writable list   Jan Kiszka
  • [PATCH 02/12] env: Couple networking-related variable flags to CONFIG_NET   Jan Kiszka
  • [PATCH 03/12] tools: Add script for converting public key into device tree include   Jan Kiszka
  • [PATCH 04/12] board: siemens: iot2050: Split the build for PG1 and PG2   Jan Kiszka
  • [PATCH 05/12] arm: dts: iot2050: Use the auto generator nodes for fdt   Jan Kiszka
  • [PATCH 06/12] iot2050: Update firmware layout   Jan Kiszka
  • [PATCH 07/12] iot2050: Add watchdog start to bootcmd   Jan Kiszka
  • [PATCH 08/12] iot2050: Add CONFIG_ENV_FLAGS_LIST_STATIC   Jan Kiszka
  • [PATCH 09/12] arm: dts: iot2050: Allow verifying U-Boot proper by SPL   Jan Kiszka
  • [PATCH 10/12] iot2050: Add script for signing artifacts   Jan Kiszka
  • [PATCH 11/12] arm: dts: iot2050: Optionally embed OTP programming data into image   Jan Kiszka
  • [PATCH 12/12] doc: iot2050: Add a note about the watchdog firmware   Jan Kiszka
• Converting CONFIG_SPL_BOOT_DEVICE to Kconfig in U-Boot   Tom Rini
  • Converting CONFIG_SPL_BOOT_DEVICE to Kconfig in U-Boot   Chris Packham
    • Converting CONFIG_SPL_BOOT_DEVICE to Kconfig in U-Boot   Tom Rini
      • Converting CONFIG_SPL_BOOT_DEVICE to Kconfig in U-Boot   Chris Packham
      • Converting CONFIG_SPL_BOOT_DEVICE to Kconfig in U-Boot   Tom Rini
• [PATCH 1/3] arm: mvebu: Use MVEBU_SPL_BOOT_DEVICE instead of SPL_BOOT_DEVICE   Chris Packham
  • [PATCH 2/3] Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig   Chris Packham
    • [PATCH 2/3] Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig   Marek Behún
    • [PATCH 2/3] Convert CONFIG_FIXED_SDHCI_ALIGNED_BUFFER to Kconfig   Stefan Roese
  • [PATCH 3/3] arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE   Chris Packham
    • [PATCH 3/3] arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE   Marek Behún
    • [PATCH 3/3] arm: mvebu: Remove CONFIG_SPL_BOOT_DEVICE   Stefan Roese
  • [PATCH 1/3] arm: mvebu: Use MVEBU_SPL_BOOT_DEVICE instead of SPL_BOOT_DEVICE   Stefan Roese
• [PATCH v3 0/2] fix issues in bootmenu after adding efi entries   Masahisa Kojima
  • [PATCH v3 1/2] bootmenu: use utf-8 for menu title   Masahisa Kojima
  • [PATCH v3 2/2] bootmenu: U-Boot console is enabled as default   Masahisa Kojima
• Pull request for efi-2022-07-rc4-2   Heinrich Schuchardt
  • Pull request for efi-2022-07-rc4-2   Masahisa Kojima
    • Pull request for efi-2022-07-rc4-2   Pali Rohár
      • Pull request for efi-2022-07-rc4-2   Tom Rini
• [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig   Tom Rini
  • [PATCH 07/20] Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig   Tom Rini
• [PATCH 02/20] imx6: Update CONFIG_SPL_STACK defaults in Kconfig   Tom Rini
• [PATCH 03/20] imx7: Update CONFIG_SPL_STACK defaults in Kconfig   Tom Rini
• [PATCH 04/20] Convert CONFIG_TPL_NAND_INIT to Kconfig   Tom Rini
• [PATCH 05/20] Convert CONFIG_SPL_RELOC_TEXT_BASE et al to Kconfig   Tom Rini
• [PATCH 06/20] Convert CONFIG_SPL_BSS_START_ADDR to Kconfig   Tom Rini
• [PATCH 08/20] Remove CONFIG_SYS_SPL_LEN largely   Tom Rini
• [PATCH 09/20] etamin: Remove CONFIG_SPL_CMT defines   Tom Rini
• [PATCH 10/20] Convert CONFIG_SPL_GD_ADDR to Kconfig   Tom Rini
• [PATCH 11/20] Drop CONFIG_SPL_SPI_FLASH_MINIMAL   Tom Rini
• [PATCH 12/20] Remove CONFIG_SPL_STACK_SIZE   Tom Rini
• [PATCH 13/20] Convert CONFIG_SPL_TARGET to Kconfig   Tom Rini
• [PATCH 14/20] Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig   Tom Rini
• [PATCH 15/20] ax25-ae350: Move CONFIG_SYS_FDT_BASE to Kconfig   Tom Rini
• [PATCH 16/20] Drop CONFIG_SPL_SIZE   Tom Rini
• [PATCH 17/20] spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it   Tom Rini
• [PATCH 18/20] Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig   Tom Rini
• [PATCH 19/20] Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to Kconfig   Tom Rini
• [PATCH 20/20] riotboard, syzygy_hub: Disable SPL_FALCON_BOOT_MMCSD   Tom Rini
• [PATCH] tlv_eeprom: Add missing CRC32 dependency   Pali Rohár
  • [PATCH] tlv_eeprom: Add missing CRC32 dependency   Baruch Siach
  • [PATCH] tlv_eeprom: Add missing CRC32 dependency   Stefan Roese
• [PATCH v3 00/13] Fuzzing and ASAN for sandbox   Andrew Scull
  • [PATCH v3 01/13] serial: sandbox: Fix buffer underflow in puts   Andrew Scull
    • [PATCH v3 01/13] serial: sandbox: Fix buffer underflow in puts   Sean Anderson
  • [PATCH v3 02/13] sandbox: Rename EFI runtime sections   Andrew Scull
  • [PATCH v3 03/13] sandbox: Rename getopt sections   Andrew Scull
  • [PATCH v3 04/13] linker_lists: Rename sections to remove . prefix   Andrew Scull
  • [PATCH v3 05/13] sandbox: Add support for Address Sanitizer   Andrew Scull
  • [PATCH v3 06/13] test/py: test_stackprotector: Disable for ASAN   Andrew Scull
  • [PATCH v3 07/13] CI: Azure: Build with ASAN enabled   Andrew Scull
  • [PATCH v3 08/13] fuzzing_engine: Add fuzzing engine uclass   Andrew Scull
  • [PATCH v3 09/13] test: fuzz: Add framework for fuzzing   Andrew Scull
  • [PATCH v3 10/13] sandbox: Decouple program entry from sandbox init   Andrew Scull
  • [PATCH v3 11/13] sandbox: Add libfuzzer integration   Andrew Scull
  • [PATCH v3 12/13] sandbox: Implement fuzzing engine driver   Andrew Scull
  • [PATCH v3 13/13] fuzz: virtio: Add fuzzer for vring   Andrew Scull
• [PATCH] xilinx: fru: Replace spaces with \0 in detected revision   Michal Simek
• Serial Download Boot on i.MX8MN EVK Board   Thomas Schaefer
  • Serial Download Boot on i.MX8MN EVK Board   Fabio Estevam
    • AW: Serial Download Boot on i.MX8MN EVK Board   Thomas Schaefer
      • Serial Download Boot on i.MX8MN EVK Board   Fabio Estevam
• [PATCH v3 0/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
• [PATCH v3 1/2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
• [PATCH v3 2/2] configs: get rid of build warnings due to SPL_USB_DWC3_GENERIC   Angus Ainslie
• [PATCH v6] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH 00/10] board: sl28: various updates   Michael Walle
  • [PATCH 01/10] armv8: layerscape: add missing RCW source defines   Michael Walle
  • [PATCH 02/10] armv8: layerscape: spl: mark OCRAM as non-secure   Michael Walle
  • [PATCH 03/10] board: sl28: set CPO value   Michael Walle
  • [PATCH 04/10] board: sl28: remove unneeded ddr config parameter   Michael Walle
  • [PATCH 05/10] board: sl28: support 8 GiB memory   Michael Walle
  • [PATCH 06/10] board: sl28: rename include guard macro   Michael Walle
  • [PATCH 07/10] board: sl28: implement additional bootsources   Michael Walle
  • [PATCH 08/10] board: sl28: add user friendly names for the boot sources   Michael Walle
  • [PATCH 09/10] board: sl28: support dynamic prompts   Michael Walle
  • [PATCH 10/10] board: sl28: remove COUNTER_FREQUENCY_REAL   Michael Walle
• [PATCH 0/3] EFI: Miscellaneous capsule update fixes   Sughosh Ganu
  • [PATCH 1/3] EFI: Populate descriptor_count value only when image_info_size is not zero   Sughosh Ganu
  • [PATCH 2/3] EFI: Do not read OsIndications variable if EFI_IGNORE_OSINDICATIONS is enabled   Sughosh Ganu
  • [PATCH 3/3] EFI: Update the documentation to reflect the correct value of OsIndications   Sughosh Ganu
• [PATCH 1/2] test/py: efi_capsule: repair image authentication test   Vincent Stehlé
  • [PATCH 2/2] efi: test/py: authenticate fit capsules   Vincent Stehlé
• [PATCH] arm: dts: socfpga: agilex: Add freeze controller node   dinesh.maniyam at intel.com
• [PATCH] arm: dts: socfpga: stratix10: Add freeze controller node   dinesh.maniyam at intel.com
• [PATCH] distroboot: Fix ubifs   Pali Rohár
• [PATCH v1] spi: nuvoton: add NPCM PSPI controller driver   Jim Liu
• [PATCH v2 00/14] SCMI multi-channel and optee shm   Etienne Carriere
  • [PATCH v2 01/14] firmware: scmi: optee: use TEE shared memory for SCMI messages   Etienne Carriere
  • [PATCH v2 02/14] firmware: scmi: optee: fix inline description of PTA_SCMI_CMD_GET_CHANNEL   Etienne Carriere
  • [PATCH v2 03/14] firmware: scmi: prepare scmi uclass API to multi-channel   Etienne Carriere
  • [PATCH v2 04/14] firmware: scmi: prepare uclass to pass channel reference   Etienne Carriere
  • [PATCH v2 05/14] firmware: scmi: factorize scmi transport look up   Etienne Carriere
  • [PATCH v2 06/14] firmware: scmi: add multi-channel support   Etienne Carriere
  • [PATCH v2 07/14] firmware: scmi: mailbox transport: implement multi-channel   Etienne Carriere
  • [PATCH v2 08/14] firmware: scmi: smccc transport: implement multi-channel   Etienne Carriere
  • [PATCH v2 09/14] firmware: scmi: optee transport: implement multi-channel   Etienne Carriere
  • [PATCH v2 10/14] clk: scmi: support SCMI multi-channel   Etienne Carriere
  • [PATCH v2 11/14] reset: scmi: support SCMI multi-channel   Etienne Carriere
  • [PATCH v2 12/14] power: regulator: scmi: support SCMI multi-channel   Etienne Carriere
  • [PATCH v2 13/14] power: regulator: scmi: simplify scmi_voltd_set_enable()   Etienne Carriere
  • [PATCH v2 14/14] firmware: scmi: use multi channel in mailbox, optee and smccc agents   Etienne Carriere
• [0/3] spl: Start cleaning up common/spl/Kconfig   Tom Rini
  • [PATCH 1/3] spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files   Tom Rini
  • [PATCH 2/3] spl: Rework Kconfig to be more menu driven   Tom Rini
  • [PATCH 3/3] spl: Rework and tighten some dependencies   Tom Rini
• [PATCH] net: enetc: unregister mdiobus   Michael Walle
• Pull request for efi-2022-07-rc4-3   Heinrich Schuchardt
  • Pull request for efi-2022-07-rc4-3   Pali Rohár
  • Pull request for efi-2022-07-rc4-3   Tom Rini
• [PATCH v2 01/14] cmd: cpu: migrate cpu command to U_BOOT_CMD_WITH_SUBCMDS()   Ovidiu Panait
  • [PATCH v2 03/14] microblaze: start.S: remove unused code   Ovidiu Panait
  • [PATCH v2 04/14] microblaze: cache: replace XILINX_USE_DCACHE -> CONFIG_DCACHE   Ovidiu Panait
  • [PATCH v2 05/14] microblaze: cache: improve dcache Kconfig options   Ovidiu Panait
  • [PATCH v2 06/14] microblaze: cache: improve icache Kconfig options   Ovidiu Panait
  • [PATCH v2 07/14] microblaze: cache: split flush_cache() function   Ovidiu Panait
  • [PATCH v2 08/14] microblaze: cache: introduce Kconfig options for icache/dcache sizes   Ovidiu Panait
  • [PATCH v2 09/14] microblaze: cache: introduce flush_cache_all()   Ovidiu Panait
  • [PATCH v2 10/14] microblaze: cache: introduce cpuinfo structure   Ovidiu Panait
  • [PATCH v2 11/14] microblaze: cache: introduce flush_dcache_range()   Ovidiu Panait
  • [PATCH v2 12/14] microblaze: Kconfig: introduce XILINX_MICROBLAZE0_FPGA_FAMILY option   Ovidiu Panait
  • [PATCH v2 13/14] microblaze: add support for handling PVR data   Ovidiu Panait
  • [PATCH v2 14/14] cpu: add CPU driver for microblaze   Ovidiu Panait
• [PATCH v2 02/14] cpu-uclass: relocate ops pointers for CONFIG_NEEDS_MANUAL_RELOC   Ovidiu Panait