[PATCH V2 09/16] imx: imx8mn-beacon: enable pinctrl_wdog in SPL

Peng Fan (OSS) peng.fan at oss.nxp.com
Thu May 5 13:06:05 CEST 2022


From: Peng Fan <peng.fan at nxp.com>

Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi |  4 ++++
 board/beacon/imx8mn/spl.c                  | 10 ----------
 2 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
index 69fd69c8d02..eb1dd8debba 100644
--- a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
@@ -132,6 +132,10 @@
 	u-boot,dm-spl;
 };
 
+&pinctrl_wdog {
+	u-boot,dm-spl;
+};
+
 &binman {
 	 u-boot-spl-ddr {
 		filename = "u-boot-spl-ddr.bin";
diff --git a/board/beacon/imx8mn/spl.c b/board/beacon/imx8mn/spl.c
index 4563446db19..029f71bc995 100644
--- a/board/beacon/imx8mn/spl.c
+++ b/board/beacon/imx8mn/spl.c
@@ -68,27 +68,17 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
-#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 #define PWM1_PAD_CTRL (PAD_CTL_FSEL2 | PAD_CTL_DSE6)
 
 static iomux_v3_cfg_t const pwm_pads[] = {
 	IMX8MN_PAD_GPIO1_IO01__PWM1_OUT | MUX_PAD_CTRL(PWM1_PAD_CTRL),
 };
 
-static iomux_v3_cfg_t const wdog_pads[] = {
-	IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
 int board_early_init_f(void)
 {
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
 	/* Claiming pwm pins prevents LCD flicker during startup*/
 	imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads));
 
-	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-	set_wdog_reset(wdog);
-
 	init_uart_clk(1);
 
 	return 0;
-- 
2.36.0



More information about the U-Boot mailing list