[PATCH 2/2] mmc: fsl_esdhc_imx: Implement wait_dat0 mmc ops

Jaehoon Chung jh80.chung at samsung.com
Fri May 27 04:14:56 CEST 2022


On 5/26/22 23:37, Loic Poulain wrote:
> Implement wait_dat0 mmc ops callbac, allowing to reduce SPL boot time.
> 
> Before (using grabserial):
> [0.000001 0.000001] U-Boot SPL 2021.04-xxxx
> [0.028257 0.028257] DDRINFO: start DRAM init
> [0.028500 0.000243] DDRINFO: DRAM rate 3000MTS
> [0.304627 0.276127] DDRINFO:ddrphy calibration done
> [0.305647 0.001020] DDRINFO: ddrmix config done
> [0.352584 0.046937] SEC0:  RNG instantiated
> [0.374299 0.021715] Normal Boot
> [0.374675 0.000376] Trying to boot from MMC2
> [1.250580 0.875905] NOTICE:  BL31: v2.4(release):lf-5.10.72-2.2.0-0-g5782363f9
> [1.251985 0.001405] NOTICE:  BL31: Built : 08:02:40, Apr 12 2022
> [1.522560 0.270575]
> [1.522734 0.000174]
> [1.522788 0.000054] U-Boot 2021.04-xxxx
> 
> After:
> [0.000001 0.000001] U-Boot SPL 2021.04-xxxx
> [0.001614 0.001614] DDRINFO: start DRAM init
> [0.002377 0.000763] DDRINFO: DRAM rate 3000MTS
> [0.278494 0.276117] DDRINFO:ddrphy calibration done
> [0.279266 0.000772] DDRINFO: ddrmix config done
> [0.338432 0.059166] SEC0:  RNG instantiated
> [0.339051 0.000619] Normal Boot
> [0.339431 0.000380] Trying to boot from MMC2
> [0.412587 0.073156] NOTICE:  BL31: v2.4(release):lf-5.15.5-1.0.0-0-g05f788b
> [0.414191 0.001604] NOTICE:  BL31: Built : 10:35:26, Apr  6 2022
> [0.700685 0.286494]
> [0.700793 0.000108]
> [0.700845 0.000052] U-Boot 2021.04-xxxx
> 
> Signed-off-by: Loic Poulain <loic.poulain at linaro.org>


Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/fsl_esdhc_imx.c | 50 ++++++++++++++++++++++++++++++---------------
>  1 file changed, 33 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
> index 02208a5..ec52f93 100644
> --- a/drivers/mmc/fsl_esdhc_imx.c
> +++ b/drivers/mmc/fsl_esdhc_imx.c
> @@ -1060,6 +1060,30 @@ static int esdhc_getcd_common(struct fsl_esdhc_priv *priv)
>  	return timeout > 0;
>  }
>  
> +static int esdhc_wait_dat0_common(struct fsl_esdhc_priv *priv, int state,
> +				  int timeout_us)
> +{
> +	struct fsl_esdhc *regs = priv->esdhc_regs;
> +	int ret, err;
> +	u32 tmp;
> +
> +	/* make sure the card clock keep on */
> +	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
> +
> +	ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
> +				!!(tmp & PRSSTAT_DAT0) == !!state,
> +				timeout_us);
> +
> +	/* change to default setting, let host control the card clock */
> +	esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
> +
> +	err = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100);
> +	if (err)
> +		pr_warn("card clock not gate off as expect.\n");
> +
> +	return ret;
> +}
> +
>  static int esdhc_reset(struct fsl_esdhc *regs)
>  {
>  	ulong start;
> @@ -1109,11 +1133,19 @@ static int esdhc_set_ios(struct mmc *mmc)
>  	return esdhc_set_ios_common(priv, mmc);
>  }
>  
> +static int esdhc_wait_dat0(struct mmc *mmc, int state, int timeout_us)
> +{
> +	struct fsl_esdhc_priv *priv = mmc->priv;
> +
> +	return esdhc_wait_dat0_common(priv, state, timeout_us);
> +}
> +
>  static const struct mmc_ops esdhc_ops = {
>  	.getcd		= esdhc_getcd,
>  	.init		= esdhc_init,
>  	.send_cmd	= esdhc_send_cmd,
>  	.set_ios	= esdhc_set_ios,
> +	.wait_dat0	= esdhc_wait_dat0,
>  };
>  #endif
>  
> @@ -1576,25 +1608,9 @@ static int __maybe_unused fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
>  static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
>  				int timeout_us)
>  {
> -	int ret, err;
> -	u32 tmp;
>  	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
> -	struct fsl_esdhc *regs = priv->esdhc_regs;
>  
> -	/* make sure the card clock keep on */
> -	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
> -
> -	ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
> -				!!(tmp & PRSSTAT_DAT0) == !!state,
> -				timeout_us);
> -
> -	/* change to default setting, let host control the card clock */
> -	esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
> -	err = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100);
> -	if (err)
> -		dev_warn(dev, "card clock not gate off as expect.\n");
> -
> -	return ret;
> +	return esdhc_wait_dat0_common(priv, state, timeout_us);
>  }
>  
>  static const struct dm_mmc_ops fsl_esdhc_ops = {



More information about the U-Boot mailing list