[PATCH 06/22] imx: imx8m[m/p]_phycore: Enable DM_SERIAL

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Enable CONFIG_DM_SERIAL. uart and its pinmux was already
marked with u-boot,dm-spl.
Move preloader_console_init after spl_early_init to make sure driver
model work.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Tested-by: Teresa Remmet <t.remmet at phytec.de>
Reviewed-by: Fabio Estevam <festevam at denx.de>
---
 board/phytec/phycore_imx8mm/spl.c | 12 ++----------
 board/phytec/phycore_imx8mp/spl.c |  8 --------
 configs/phycore-imx8mm_defconfig  |  1 +
 configs/phycore-imx8mp_defconfig  |  1 +
 include/configs/phycore_imx8mm.h  |  3 ---
 include/configs/phycore_imx8mp.h  |  3 ---
 6 files changed, 4 insertions(+), 24 deletions(-)

diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index d54145ef995..7f24a3affc8 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -57,14 +57,8 @@ int board_fit_config_name_match(const char *name)
 	return 0;
 }
 
-#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE)
 
-static iomux_v3_cfg_t const uart_pads[] = {
-	IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-	IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static iomux_v3_cfg_t const wdog_pads[] = {
 	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -77,8 +71,6 @@ int board_early_init_f(void)
 
 	set_wdog_reset(wdog);
 
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
 	return 0;
 }
 
@@ -92,8 +84,6 @@ void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	preloader_console_init();
-
 	/* Clear the BSS. */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -103,6 +93,8 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
+	preloader_console_init();
+
 	enable_tzc380();
 
 	/* DDR initialization */
diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c
index 19c486e5517..38a581bef57 100644
--- a/board/phytec/phycore_imx8mp/spl.c
+++ b/board/phytec/phycore_imx8mp/spl.c
@@ -89,14 +89,8 @@ int board_fit_config_name_match(const char *name)
 	return 0;
 }
 
-#define UART_PAD_CTRL   (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL   (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
-static iomux_v3_cfg_t const uart_pads[] = {
-	MX8MP_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX8MP_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static iomux_v3_cfg_t const wdog_pads[] = {
 	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -109,8 +103,6 @@ int board_early_init_f(void)
 
 	set_wdog_reset(wdog);
 
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
 	return 0;
 }
 
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index ba5833f7060..9da222afc54 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -107,6 +107,7 @@ CONFIG_PINCTRL_IMX8M=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 86d0f4df7f6..a851b1bdccb 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -98,6 +98,7 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_POWER_I2C=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index 46fadd56106..564b8125ba3 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -83,9 +83,6 @@
 #define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE                 SZ_2G /* 2GB DDR */
 
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(3)
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		SZ_2K
 #define CONFIG_SYS_MAXARGS		64
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index eb92c423392..3e4315f2b81 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -83,9 +83,6 @@
 #define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000
 
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART_BASE_ADDR(1)
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		SZ_2K
 #define CONFIG_SYS_MAXARGS		64
-- 
2.36.0