[PATCH V2 4/4] configs: imx8m: use common imx8m.h for i.MX8MQ
Peng Fan (OSS)
peng.fan at oss.nxp.com
Thu May 5 11:10:46 CEST 2022
From: Peng Fan <peng.fan at nxp.com>
Some SPL definitions could be gerneralized, so use imx8m.h for iMX8MQ.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
include/configs/imx8m.h | 10 ++++++++++
include/configs/imx8mq_cm.h | 24 +-----------------------
include/configs/imx8mq_evk.h | 19 +------------------
include/configs/imx8mq_phanbell.h | 19 ++-----------------
include/configs/kontron_pitx_imx8m.h | 19 +------------------
include/configs/pico-imx8mq.h | 20 +-------------------
6 files changed, 16 insertions(+), 95 deletions(-)
diff --git a/include/configs/imx8m.h b/include/configs/imx8m.h
index 9dc92f7b2df..7a69493a3b9 100644
--- a/include/configs/imx8m.h
+++ b/include/configs/imx8m.h
@@ -42,6 +42,16 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
+#elif defined(CONFIG_IMX8MQ)
+/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
+#define CONFIG_SPL_STACK 0x187FF0
+#define CONFIG_SPL_BSS_START_ADDR 0x00180000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
+#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x182000
#endif
#endif
#endif
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 34d64f7ae45..016737f0907 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -6,32 +6,10 @@
#ifndef __IMX8M_CM_H
#define __IMX8M_CM_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR 0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x182000
-/* For RAW image gives a error info not panic */
-
-#endif
-
-/* ENET Config */
-/* ENET1 */
-
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 98257e8ba81..29683480be1 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -6,28 +6,11 @@
#ifndef __IMX8M_EVK_H
#define __IMX8M_EVK_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-
#ifdef CONFIG_SPL_BUILD
-/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_STACK 0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR 0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x182000
-/* For RAW image gives a error info not panic */
-
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
#endif
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index 19381b6b778..646b384f342 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -6,25 +6,10 @@
#ifndef __IMX8M_PHANBELL_H
#define __IMX8M_PHANBELL_H
-#include <linux/sizes.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
+#undef CONFIG_SPL_MAX_SIZE
#define CONFIG_SPL_MAX_SIZE (172 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-
-#ifdef CONFIG_SPL_BUILD
-/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_STACK 0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR 0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x182000
-/* For RAW image gives a error info not panic */
-#endif
/* ENET Config */
/* ENET1 */
diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h
index d519935b064..1b8b4671bc5 100644
--- a/include/configs/kontron_pitx_imx8m.h
+++ b/include/configs/kontron_pitx_imx8m.h
@@ -3,33 +3,16 @@
#ifndef __KONTRON_PITX_IMX8M_H
#define __KONTRON_PITX_IMX8M_H
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-#include <asm/arch/imx-regs.h>
+#include <configs/imx8m.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K)
-#define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K)
-
/* GUID for capsule updatable firmware image */
#define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR 0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x182000
-/* For RAW image gives a error info not panic */
-
-
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
#endif
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 1de54e6431c..691e711855d 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -6,25 +6,7 @@
#ifndef __IMX8M_PICOPI_H
#define __IMX8M_PICOPI_H
-#include <linux/sizes.h>
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_SPL_MAX_SIZE (124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-
-#ifdef CONFIG_SPL_BUILD
-/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_STACK 0x187FF0
-#define CONFIG_SPL_BSS_START_ADDR 0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
-
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x182000
-/* For RAW image gives a error info not panic */
-#endif
+#include <configs/imx8m.h>
/* ENET Config */
/* ENET1 */
--
2.36.0
More information about the U-Boot
mailing list