[PATCH 7/5] serial: Add new config option TPL_DEBUG_UART_BASE

[Stefan Roese]

On 16.05.22 18:49, Pali Rohár wrote:
> TPL_DEBUG_UART_BASE is same as DEBUG_UART_BASE, but applies only for TPL.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   drivers/serial/Kconfig | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 46726d76b162..f6425a530e57 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -515,6 +515,13 @@ config SPL_DEBUG_UART_BASE
>   	help
>   	  This is the base address of your UART for memory-mapped UARTs for SPL.
>   
> +config TPL_DEBUG_UART_BASE
> +	hex "Base address of UART for TPL"
> +	depends on TPL && DEBUG_UART
> +	default DEBUG_UART_BASE
> +	help
> +	  This is the base address of your UART for memory-mapped UARTs for TPL.
> +
>   config DEBUG_UART_CLOCK
>   	int "UART input clock"
>   	depends on DEBUG_UART

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de