[PATCH V4 5/5] board: bsh: Switch to nand spl load instead of romapi

[Stefano Babic]

On 18.05.22 12:17, Michael Nazzareno Trimarchi wrote:
> Hi Fabio and Stefano
> 
> do not consider this patch because I found other problems on manage
> flash.bin properly in imx8 family. All the other patches
> are needed
> 


OK, fine, got it !

Stefano
> Michael
> 
> On Sun, May 15, 2022 at 11:35 AM Michael Trimarchi
> <michael at amarulasolutions.com> wrote:
>>
>> romapi is not eble to skip bad block so we need to workaround
>> using the spl
>>
>> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
>> ---
>>   board/bsh/imx8mn_smm_s2/spl.c | 3 +++
>>   1 file changed, 3 insertions(+)
>> ---
>> V3->V4:
>>          - none
>> V2->V3:
>>          - Add to series and fix if condition
>> V1->V2:
>>          - none
>> ---
>> diff --git a/board/bsh/imx8mn_smm_s2/spl.c b/board/bsh/imx8mn_smm_s2/spl.c
>> index 0f61acc630..097b60c055 100644
>> --- a/board/bsh/imx8mn_smm_s2/spl.c
>> +++ b/board/bsh/imx8mn_smm_s2/spl.c
>> @@ -18,6 +18,9 @@
>>
>>   int spl_board_boot_device(enum boot_device boot_dev_spl)
>>   {
>> +       if (IS_ENABLED(CONFIG_NAND_MXS) && get_boot_device() != USB_BOOT)
>> +               return BOOT_DEVICE_NAND;
>> +
>>          return BOOT_DEVICE_BOOTROM;
>>   }
>>
>> --
>> 2.25.1
>>
> 
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================