[PATCH V4 5/5] board: bsh: Switch to nand spl load instead of romapi

[Michael Nazzareno Trimarchi]

Hi Fabio and Stefano

do not consider this patch because I found other problems on manage
flash.bin properly in imx8 family. All the other patches
are needed

Michael

On Sun, May 15, 2022 at 11:35 AM Michael Trimarchi
<michael at amarulasolutions.com> wrote:
>
> romapi is not eble to skip bad block so we need to workaround
> using the spl
>
> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
> ---
>  board/bsh/imx8mn_smm_s2/spl.c | 3 +++
>  1 file changed, 3 insertions(+)
> ---
> V3->V4:
>         - none
> V2->V3:
>         - Add to series and fix if condition
> V1->V2:
>         - none
> ---
> diff --git a/board/bsh/imx8mn_smm_s2/spl.c b/board/bsh/imx8mn_smm_s2/spl.c
> index 0f61acc630..097b60c055 100644
> --- a/board/bsh/imx8mn_smm_s2/spl.c
> +++ b/board/bsh/imx8mn_smm_s2/spl.c
> @@ -18,6 +18,9 @@
>
>  int spl_board_boot_device(enum boot_device boot_dev_spl)
>  {
> +       if (IS_ENABLED(CONFIG_NAND_MXS) && get_boot_device() != USB_BOOT)
> +               return BOOT_DEVICE_NAND;
> +
>         return BOOT_DEVICE_BOOTROM;
>  }
>
> --
> 2.25.1
>


-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com