[PATCH V2 14/14] imx: imx8mq-phanbell: enable CONFIG_DM_SERIAL

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Marked related nodes as u-boot,dm-spl for serial driver model
Enable CONFIG_DM_SERIAL

Signed-off-by: Peng Fan <peng.fan at nxp.com>
Reviewed-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/dts/imx8mq-phanbell-u-boot.dtsi | 8 ++++++++
 configs/imx8mq_phanbell_defconfig        | 1 +
 2 files changed, 9 insertions(+)

diff --git a/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi b/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi
index a65a942ee7a..8d6f3058295 100644
--- a/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-phanbell-u-boot.dtsi
@@ -5,3 +5,11 @@
 &reg_usdhc2_vmmc {
 	u-boot,off-on-delay-us = <20000>;
 };
+
+&uart1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-spl;
+};
diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig
index a86311b7cc5..095e42e6ba1 100644
--- a/configs/imx8mq_phanbell_defconfig
+++ b/configs/imx8mq_phanbell_defconfig
@@ -83,5 +83,6 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_POWER_I2C=y
 CONFIG_DM_RESET=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y
-- 
2.36.0