[PATCH] board: gateowrks: venice: add GW7903 PMIC

Tim Harvey tharvey at gateworks.com
Fri May 20 17:55:13 CEST 2022


The GW7903 has a BD71847 PMIC on I2C1. Adjust the model compare strings
to add it.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/venice/spl.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 4c0feb4381c9..914a56a96f52 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -173,11 +173,12 @@ static int power_init_board(void)
 	}
 
 	else if ((!strncmp(model, "GW7901", 6)) ||
-		 (!strncmp(model, "GW7902", 6))) {
-		if (!strncmp(model, "GW7901", 6))
-			ret = uclass_get_device_by_seq(UCLASS_I2C, 1, &bus);
-		else
+		 (!strncmp(model, "GW7902", 6)) ||
+		 (!strncmp(model, "GW7903", 6))) {
+		if (!strncmp(model, "GW7902", 6))
 			ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
+		else
+			ret = uclass_get_device_by_seq(UCLASS_I2C, 1, &bus);
 		if (ret) {
 			printf("PMIC    : failed I2C2 probe: %d\n", ret);
 			return ret;
-- 
2.17.1



More information about the U-Boot mailing list