[PATCH v7 2/7] fpga: add fit_fpga_load function
Oleksandr Suvorov
cryosay at gmail.com
Wed May 4 20:26:10 CEST 2022
Hi Adrian,
On Wed, May 4, 2022 at 5:28 PM Adrian Fiergolski
<adrian.fiergolski at fastree3d.com> wrote:
>
> Hi Oleksandr,
>
> On 03.05.2022 09:42, Michal Simek wrote:
> >
> >
> > On 4/11/22 20:00, Adrian Fiergolski wrote:
> >> From: Oleksandr Suvorov <oleksandr.suvorov at foundries.io>
> >>
> >> Introduce a function which passes an fpga compatible string from
> >> FIT images to FPGA drivers. This lets the different implementations
> >> decide how to handle it.
> >>
> >> Some code of Jorge Ramirez-Ortiz <jorge at foundries.io> is reused.
> >>
> >> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at foundries.io>
> >> Tested-by: Ricardo Salveti <ricardo at foundries.io>
> >> Co-developed-by: Adrian Fiergolski <adrian.fiergolski at fastree3d.com>
> >> Signed-off-by: Adrian Fiergolski <adrian.fiergolski at fastree3d.com>
> >> ---
> >> common/spl/spl_fit.c | 6 ++----
> >> drivers/fpga/fpga.c | 23 ++++++++++++++++++++++-
> >> include/fpga.h | 4 ++++
> >> 3 files changed, 28 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> >> index 1bbf824684..0e3c2a94b6 100644
> >> --- a/common/spl/spl_fit.c
> >> +++ b/common/spl/spl_fit.c
> >> @@ -588,11 +588,9 @@ static int spl_fit_upload_fpga(struct
> >> spl_fit_info *ctx, int node,
> >> compatible = fdt_getprop(ctx->fit, node, "compatible", NULL);
> >> if (!compatible)
> >> warn_deprecated("'fpga' image without 'compatible' property");
> >> - else if (strcmp(compatible, "u-boot,fpga-legacy"))
> >> - printf("Ignoring compatible = %s property\n", compatible);
> >> - ret = fpga_load(0, (void *)fpga_image->load_addr,
> >> fpga_image->size,
> >> - BIT_FULL);
> >> + ret = fit_fpga_load(0, (void *)fpga_image->load_addr,
> >> fpga_image->size,
> >> + BIT_FULL, compatible);
> >> if (ret) {
> >> printf("%s: Cannot load the image to the FPGA\n", __func__);
> >> return ret;
> >> diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c
> >> index 3b0a44b242..a306dd81f9 100644
> >> --- a/drivers/fpga/fpga.c
> >> +++ b/drivers/fpga/fpga.c
> >> @@ -249,8 +249,23 @@ int fpga_loads(int devnum, const void *buf,
> >> size_t size,
> >> }
> >> #endif
> >> +int fit_fpga_load(int devnum, const void *buf, size_t bsize,
> >> + bitstream_type bstype, const char *compatible)
> >> +{
> >> + fpga_desc *desc = fpga_get_desc(devnum);
> >
> > this generates warning which you should fix.
> >
> > + fpga_desc *desc = fpga_get_desc(devnum);
> > + ^~~~~~~~~~~~~
> > w+../drivers/fpga/fpga.c: In function ‘fit_fpga_load’:
> > w+../drivers/fpga/fpga.c:255:20: warning: initialization discards
> > ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
>
> As it's your patch, could you address it?
>
> The 'compatible' field can't be set here, as fpga_get_desc returns
> 'const fpga_desc * const'. The descriptors table is populated (fpga_add)
> in board_init. At that stage, I am afraid, we don't have access to the
> fit image information yet to set a proper 'compatible' (would need to
> check the code more carefully). Moreover, IMHO it's not the cleanest way
> to change the 'compatible' field after the driver's initialisation.
Thanks for catching this. I'm addressing the issue this Friday.
> >
> >> +
> >> + /*
> >> + * Store the compatible string to proceed it in underlying
> >> + * functions
> >> + */
> >> + desc->compatible = (char *)compatible;
> >> +
> >> + return fpga_load(devnum, buf, bsize, bstype);
> >> +}
> >> +
> >> /*
> >> - * Generic multiplexing code
> >> + * Generic multiplexing code:
> >> + * Each architecture must handle the mandatory FPGA DT compatible
> >> property.
> >> */
> >> int fpga_load(int devnum, const void *buf, size_t bsize,
> >> bitstream_type bstype)
> >> {
> >> @@ -270,6 +285,9 @@ int fpga_load(int devnum, const void *buf, size_t
> >> bsize, bitstream_type bstype)
> >> break;
> >> case fpga_altera:
> >> #if defined(CONFIG_FPGA_ALTERA)
> >> + if (strncmp(desc->compatible, "u-boot,fpga-legacy", 18))
> >> + printf("Ignoring compatible = %s property\n",
> >> + desc->compatible);
> >> ret_val = altera_load(desc->devdesc, buf, bsize);
> >> #else
> >> fpga_no_sup((char *)__func__, "Altera devices");
> >> @@ -277,6 +295,9 @@ int fpga_load(int devnum, const void *buf, size_t
> >> bsize, bitstream_type bstype)
> >> break;
> >> case fpga_lattice:
> >> #if defined(CONFIG_FPGA_LATTICE)
> >> + if (strncmp(desc->compatible, "u-boot,fpga-legacy", 18))
> >> + printf("Ignoring compatible = %s property\n",
> >> + desc->compatible);
> >> ret_val = lattice_load(desc->devdesc, buf, bsize);
> >> #else
> >> fpga_no_sup((char *)__func__, "Lattice devices");
> >> diff --git a/include/fpga.h b/include/fpga.h
> >> index ec5144334d..2891f32106 100644
> >> --- a/include/fpga.h
> >> +++ b/include/fpga.h
> >> @@ -35,6 +35,7 @@ typedef enum { /* typedef fpga_type */
> >> typedef struct { /* typedef fpga_desc */
> >> fpga_type devtype; /* switch value to select sub-functions */
> >> void *devdesc; /* real device descriptor */
> >> + char *compatible; /* device compatible string */
> >> } fpga_desc; /* end, typedef fpga_desc */
> >> typedef struct { /* typedef fpga_desc */
> >> @@ -63,6 +64,9 @@ int fpga_add(fpga_type devtype, void *desc);
> >> int fpga_count(void);
> >> const fpga_desc *const fpga_get_desc(int devnum);
> >> int fpga_is_partial_data(int devnum, size_t img_len);
> >> +/* the DT compatible property must be handled by the different FPGA
> >> archs */
> >> +int fit_fpga_load(int devnum, const void *buf, size_t bsize,
> >> + bitstream_type bstype, const char *compatible);
> >> int fpga_load(int devnum, const void *buf, size_t bsize,
> >> bitstream_type bstype);
> >> int fpga_fsload(int devnum, const void *buf, size_t size,
> >
> > M
> Adrian
--
Best regards
Oleksandr
Oleksandr Suvorov
cryosay at gmail.com
More information about the U-Boot
mailing list