[PATCH 1/2] arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals

[Stefan Roese]

On 23.05.22 11:14, Pali Rohár wrote:
> This allows to compile U-Boot without some boot option for some A3720 board
> which does not have that peripheral.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   include/configs/mvebu_armada-37xx.h | 42 ++++++++++++++++++++++++-----
>   1 file changed, 36 insertions(+), 6 deletions(-)
> 
> diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
> index a39db075eae9..2ed6125f5c43 100644
> --- a/include/configs/mvebu_armada-37xx.h
> +++ b/include/configs/mvebu_armada-37xx.h
> @@ -40,13 +40,43 @@
>   #define CONFIG_LBA48
>   #define CONFIG_SYS_64BIT_LBA
>   
> +#ifdef CONFIG_MMC
> +#define BOOT_TARGET_DEVICES_MMC(func, i) func(MMC, mmc, i)
> +#else
> +#define BOOT_TARGET_DEVICES_MMC(func, i)
> +#endif
> +
> +#ifdef CONFIG_USB_STORAGE
> +#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
> +#else
> +#define BOOT_TARGET_DEVICES_USB(func)
> +#endif
> +
> +#ifdef CONFIG_SCSI
> +#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
> +#else
> +#define BOOT_TARGET_DEVICES_SCSI(func)
> +#endif
> +
> +#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
> +#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
> +#else
> +#define BOOT_TARGET_DEVICES_PXE(func)
> +#endif
> +
> +#ifdef CONFIG_CMD_DHCP
> +#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
> +#else
> +#define BOOT_TARGET_DEVICES_DHCP(func)
> +#endif
> +
>   #define BOOT_TARGET_DEVICES(func) \
> -	func(MMC, mmc, 1) \
> -	func(MMC, mmc, 0) \
> -	func(USB, usb, 0) \
> -	func(SCSI, scsi, 0) \
> -	func(PXE, pxe, na) \
> -	func(DHCP, dhcp, na)
> +	BOOT_TARGET_DEVICES_MMC(func, 1) \
> +	BOOT_TARGET_DEVICES_MMC(func, 0) \
> +	BOOT_TARGET_DEVICES_USB(func) \
> +	BOOT_TARGET_DEVICES_SCSI(func) \
> +	BOOT_TARGET_DEVICES_PXE(func) \
> +	BOOT_TARGET_DEVICES_DHCP(func)
>   
>   #include <config_distro_bootcmd.h>
>   

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de