[PATCH 6/9] arm: k3: sysfw-loader: add hyperflash support

[Vaishnav Achath]

add support for loading system firmware from hyperflash.

Signed-off-by: Vaishnav Achath <vaishnav.a at ti.com>
---
 arch/arm/mach-k3/sysfw-loader.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
index 5e48c36ccd..988e758629 100644
--- a/arch/arm/mach-k3/sysfw-loader.c
+++ b/arch/arm/mach-k3/sysfw-loader.c
@@ -346,6 +346,25 @@ static void k3_sysfw_spi_copy(u32 *dst, u32 *src, size_t len)
 }
 #endif
 
+#if CONFIG_IS_ENABLED(NOR_SUPPORT)
+static void *get_sysfw_hf_addr(void)
+{
+	struct udevice *dev;
+	fdt_addr_t addr;
+	int ret;
+
+	ret = uclass_find_first_device(UCLASS_MTD, &dev);
+	if (ret)
+		return NULL;
+
+	addr = dev_read_addr_index(dev, 1);
+	if (addr == FDT_ADDR_T_NONE)
+		return NULL;
+
+	return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS);
+}
+#endif
+
 void k3_sysfw_loader(bool rom_loaded_sysfw,
 		     void (*config_pm_pre_callback)(void),
 		     void (*config_pm_done_callback)(void))
@@ -413,6 +432,15 @@ void k3_sysfw_loader(bool rom_loaded_sysfw,
 				  CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
 		break;
 #endif
+#if CONFIG_IS_ENABLED(NOR_SUPPORT)
+	case BOOT_DEVICE_HYPERFLASH:
+		sysfw_spi_base = get_sysfw_hf_addr();
+		if (!sysfw_spi_base)
+			ret = -ENODEV;
+		k3_sysfw_spi_copy(sysfw_load_address, sysfw_spi_base,
+				  CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+		break;
+#endif
 #if CONFIG_IS_ENABLED(YMODEM_SUPPORT)
 	case BOOT_DEVICE_UART:
 #ifdef CONFIG_K3_EARLY_CONS
-- 
2.17.1