[U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround

Thu May 19 18:35:53 CEST 2022

On Thu, May 19, 2022 at 11:47 AM Lee Jones <lee.jones at linaro.org> wrote:
>
> On Thu, 19 May 2022, Lee Jones wrote:
>
> > On Thu, 19 May 2022, Peter Geis wrote:
> >
> > > On Thu, May 19, 2022 at 10:56 AM Lee Jones <lee.jones at linaro.org> wrote:
> > > >
> > > > > > > > It's not clear how this issue (present 3 years ago) was finally
> > > > > > > > resolved.  From the thread, it looks as if the fix might have made its
> > > > > > > > way into ATF, but I'm 87.6% sure ATF is not running on this platform
> > > > > > > > (yet).
> > > > > > >
> > > > > > > The rk3399 SoC has a hardware bug where the power domains are not
> > > > > > > reset upon a soft reset. This leads to situations like this one where
> > > > > > > power domains are shut down during shutdown but aren't restored on
> > > > > > > reboot.
> > > > > >
> > > > > > I assume this isn't something we can patch in the kernel driver?
> > > > >
> > > > > As far as I know it's being worked on by others, I have some ideas for
> > > > > this as well but I've been focused on rk356x lately.
> > > >
> > > > Thanks for the update.
> > > >
> > > > > > > Mainline TF-A was patched to force all power domains online
> > > > > > > when a soft reboot is triggered, which solved that issue.
> > > > > >
> > > > > > Okay, this is what I figured.
> > > > > >
> > > > > > > What particular issues are you having initializing modern u-boot on
> > > > > > > this device?
> > > > > >
> > > > > > This is the output: https://pastebin.ubuntu.com/p/d5DmsSBnrR/
> > > > > >
> > > > > > Speaking with one of the guys who supports RockPi 4 in AOSP, he
> > > > > > suspects the DDR settings.  Apparently settings for older SoCs
> > > > > > sometimes get clobbered when support for newer SoCs is added.
> > > > >
> > > > > The rk3399 TPL code is specific to the rk3399 and it really hasn't
> > > > > been touched much recently. I'm using the latest Mainline U-Boot on
> > > > > both my Rockpro64 and Pinephone-Pro. I don't see TF-A being loaded,
> > > > > which should happen between:
> > > > >
> > > > > Trying to boot from BOOTROM
> > > > > Returning to boot ROM...
> > > > >
> > > > > Otherwise it just looks like the TPL code doesn't like being in a
> > > > > single channel configuration. Does the 2GB model just forgo the second
> > > > > ram chip? Or is this actually a 4GB model and it isn't detecting the
> > > > > second chip in both downstream and mainline? Could you include the
> > > > > TPL/SPL portion of downstream's output?
> > > >
> > > > TPL/SPL are mostly silent on the downstream build:
> > > >
> > > > https://pastebin.ubuntu.com/p/m2bBdjF8Wq/
> > > >
> > > > Not sure if it helps at all, but ArmBian is pretty noisy:
> > > >
> > > > https://pastebin.ubuntu.com/p/fdPjmmqBDM/
> > >
> > > Weird that downstream and mainline are being built with none of the
> > > debug stuff enabled. Armbian clearly shows the initial setup occuring
> > > correctly, and that it's a 4GB board. It's using both the Rockchip
> > > miniloader with a Rockchip TF-A blob as well.
> > >
> > > >
> > > > > > I am yet to investigate the u-boot story in any detail.
> > > > > >
> > > > > > It's on my TODO list for today.
> > > > > >
> > > > > > > Is there a particular reason it isn't using Mainline TF-A?
> > > > > >
> > > > > > We're not using Trusted Firmware yet.
> > > > >
> > > > > This platform does not work at all without TF-A. Optee is optional.
> > > > > Either you are using the downstream blob from Rockchip or Mainline
> > > > > built yourself. Personally I prefer using Mainline everything. If you
> > > > > build Mainline U-Boot without TF-A it will throw a warning at the end
> > > > > that says the created binary is non-functional.
> > > >
> > > > Right.  Played a lot with this today.
> > > >
> > > > Our build was using TF-A which was built-in to the primary loader.
> > > >
> > > > I had 2 interesting results today.  No idea how to explain them.
> > > >
> > > > First one was with Mainline u-boot and Mainline TF-A, which found, but
> > > > was seemingly unable to boot the kernel:
> > > >
> > > > https://pastebin.ubuntu.com/p/9HRhPyfjYK/
> > > >
> > > > The second interesting result I had was using our downstream u-boot
> > > > with Mainline TF-A.  It booted perfectly from cold, but managed to get
> > > > stuck in the TPL on soft reboot in a very similar way to the one I
> > > > reported earlier when not booting with TF-A ("Channel 1: col error"):
> > >
> > >
> > > Mainline TF-A defaults to 115200 for its uart messages, so you need to
> > > either A. pass the uart config from U-Boot to TF-A with a platform
> > > config option (unreliable in my experience), B. change U-Boot to
> > > 115200, or C. change TF-A to 1.5M (the path I take). Your mainline
> >
> > Hopefully this is enough:
> >
> > diff --git a/plat/rockchip/rk3399/rk3399_def.h b/plat/rockchip/rk3399/rk3399_def.h
> > index ba83242eb..24ad94ae7 100644
> > --- a/plat/rockchip/rk3399/rk3399_def.h
> > +++ b/plat/rockchip/rk3399/rk3399_def.h
> > @@ -17,7 +17,8 @@
> >  /**************************************************************************
> >   * UART related constants
> >   **************************************************************************/
> > -#define RK3399_BAUDRATE                        115200
> > +//#define RK3399_BAUDRATE                      115200
> > +#define RK3399_BAUDRATE                        1500000
> >  #define RK3399_UART_CLOCK              24000000
> >
> >  /******************************************************************************

Yes, that is sufficient.

> >
> > > hang is exactly where you expect to hang with a non-functional TF-A. I
> > > enable some additional prints in my U-Boot tree to know exactly what
> > > gets loaded during SPL. There are also debug prints you can enable in
> > > TPL to get the setup results.
> >
> > Would you be kind enough to point me to the u-boot/TF-A prints please?
> >
> > > Would you be willing to run make savedefconfig from your mainline
> > > setup and share the result?
> >
> > u-boot or TF-A?
>
> Looks as though savedefconfig aren't u-boot or TF-A commands, so I'm
> guessing you mean kernel:
>
> https://termbin.com/rtr2

make savedefconfig causes the make system to output a defconfig file
in your current tree directory. It's a part of the kernel make system,
which also works in U-Boot mainline since it utilizes the same system.
It's how the configs in configs/ are generated. I can use that
simplified config to examine your current setup.

Or if you want to just host a git repository of your current U-Boot
mainline tree with an intact .config, that works as well.

>
> --
> Lee Jones [李琼斯]
> Principal Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog