[PATCH 2/2] rockchip: Add option to prevent booting on power plug-in
Jaehoon Chung
jh80.chung at samsung.com
Thu May 26 06:56:54 CEST 2022
On 5/24/22 04:30, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> For Rockchip boards with the all rk8xx series PMICs (excluding the
> rk808), it is sometimes desirable to not boot whenever the device is
> plugged in. An example would be for the Odroid Go Advance.
>
> This provides a configurable option to check the PMIC says it was
> powered because of a plug-in event. If the value is 1 and this option
> is selected, the device shuts down shortly after printing a message
> to console stating the reason why it's shutting down. Powering up the
> board with the power button is not affected.
>
> This patch parallels the work done in the following patch series:
> https://lore.kernel.org/u-boot/20220121133732.2397273-1-andre.przywara@arm.com/
>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
> arch/arm/mach-rockchip/Kconfig | 10 +++++++++
> drivers/power/pmic/rk8xx.c | 37 ++++++++++++++++++++++++++++++++++
> include/power/rk8xx_pmic.h | 3 +++
> 3 files changed, 50 insertions(+)
>
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index 18aff5480b..c561a77e6a 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -361,6 +361,16 @@ config ROCKCHIP_BOOT_MODE_REG
> The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
> according to the value from this register.
>
> +config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
> + bool "Disable device boot on power plug-in"
> + depends on PMIC_RK8XX
> + default n
> + ---help---
> + Say Y here to prevent the device from booting up because of a plug-in
> + event. When set, the device will boot briefly to determine why it was
> + powered on, and if it was determined because of a plug-in event
> + instead of a button press event it will shut back off.
> +
> config ROCKCHIP_STIMER
> bool "Rockchip STIMER support"
> default y
> diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c
> index 1ffbecc02a..b59675a10e 100644
> --- a/drivers/power/pmic/rk8xx.c
> +++ b/drivers/power/pmic/rk8xx.c
> @@ -51,6 +51,41 @@ U_BOOT_DRIVER(rk8xx_sysreset) = {
> .ops = &rk8xx_sysreset_ops,
> };
>
> +void rk8xx_off_for_plugin(struct udevice *dev)
> +/* In the event of a plug-in and the appropriate option has been
> + * selected, we simply shutdown instead of continue the normal boot
> + * process. Please note the rk808 is not supported as it doesn't
> + * have the appropriate register.
> + */
Could you move comment to above or into function?
> +{
> + struct rk8xx_priv *priv = dev_get_priv(dev);
> + bool plug_in = 0;
> +
> + switch (priv->variant) {
> + case RK805_ID:
> + case RK816_ID:
> + case RK818_ID:
> + plug_in = pmic_reg_read(dev, RK8XX_ON_SOURCE) & RK8XX_ON_PLUG_IN;
> + if (plug_in) {
It seems that doesn't need to use plug_in. Can't use "if (pmic_reg_read() & RK8XX_ON_PLUG_IN)"?
Best Regards,
Jaehoon Chung
> + printf("Power Off due to plug-in event\n");
> + pmic_clrsetbits(dev, REG_DEVCTRL, 0, BIT(0));
> + }
> + break;
> + case RK809_ID:
> + case RK817_ID:
> + plug_in = pmic_reg_read(dev, RK817_ON_SOURCE) & RK8XX_ON_PLUG_IN;
> + if (plug_in) {
> + printf("Power Off due to plug-in event\n");
> + pmic_clrsetbits(dev, RK817_REG_SYS_CFG3, 0,
> + BIT(0));
> + }
> + break;
> + default:
> + printf("PMIC RK%x: Cannot read boot reason.\n",
> + priv->variant);
> + }
> +}
> +
> static struct reg_data rk817_init_reg[] = {
> /* enable the under-voltage protection,
> * the under-voltage protection will shutdown the LDO3 and reset the PMIC
> @@ -211,6 +246,8 @@ static int rk8xx_probe(struct udevice *dev)
> pmic_reg_read(dev, on_source),
> pmic_reg_read(dev, off_source));
> printf("\n");
> + if (CONFIG_IS_ENABLED(ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON))
> + rk8xx_off_for_plugin(dev);
>
> return 0;
> }
> diff --git a/include/power/rk8xx_pmic.h b/include/power/rk8xx_pmic.h
> index 8ff0af35c5..3cbfc02195 100644
> --- a/include/power/rk8xx_pmic.h
> +++ b/include/power/rk8xx_pmic.h
> @@ -214,6 +214,9 @@ enum {
> #define RK817_ON_SOURCE 0xf5
> #define RK817_OFF_SOURCE 0xf6
>
> +#define RK8XX_ON_PWRON BIT(7)
> +#define RK8XX_ON_PLUG_IN BIT(6)
> +
> struct reg_data {
> u8 reg;
> u8 val;
More information about the U-Boot
mailing list