[PATCH u-boot-marvell 01/19] net: mvneta: Get rid of platdata

Stefan Roese sr at denx.de
Mon May 2 08:48:05 CEST 2022


On 27.04.22 12:41, Marek Behún wrote:
> From: Marek Behún <marek.behun at nic.cz>
> 
> Drop .of_to_plat() from the mvneta driver and parse the two properties
> in .probe().
> 
> Signed-off-by: Marek Behún <marek.behun at nic.cz>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   drivers/net/mvneta.c | 24 ++++--------------------
>   1 file changed, 4 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
> index 15dc714058..d1c5f7930d 100644
> --- a/drivers/net/mvneta.c
> +++ b/drivers/net/mvneta.c
> @@ -1692,7 +1692,6 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
>   
>   static int mvneta_probe(struct udevice *dev)
>   {
> -	struct eth_pdata *pdata = dev_get_plat(dev);
>   	struct mvneta_port *pp = dev_get_priv(dev);
>   #if CONFIG_IS_ENABLED(DM_GPIO)
>   	struct ofnode_phandle_args sfp_args;
> @@ -1729,7 +1728,10 @@ static int mvneta_probe(struct udevice *dev)
>   		buffer_loc.rx_buffers = (phys_addr_t)(bd_space + size);
>   	}
>   
> -	pp->base = (void __iomem *)pdata->iobase;
> +	pp->base = dev_read_addr_ptr(dev);
> +	pp->phy_interface = dev_read_phy_mode(dev);
> +	if (pp->phy_interface == PHY_INTERFACE_MODE_NA)
> +		return -EINVAL;
>   
>   	/* Configure MBUS address windows */
>   	if (device_is_compatible(dev, "marvell,armada-3700-neta"))
> @@ -1737,9 +1739,6 @@ static int mvneta_probe(struct udevice *dev)
>   	else
>   		mvneta_conf_mbus_windows(pp);
>   
> -	/* PHY interface is already decoded in mvneta_of_to_plat() */
> -	pp->phy_interface = pdata->phy_interface;
> -
>   	/* fetch 'fixed-link' property from 'neta' node */
>   	fl_node = fdt_subnode_offset(blob, node, "fixed-link");
>   	if (fl_node != -FDT_ERR_NOTFOUND) {
> @@ -1808,20 +1807,6 @@ static const struct eth_ops mvneta_ops = {
>   	.write_hwaddr	= mvneta_write_hwaddr,
>   };
>   
> -static int mvneta_of_to_plat(struct udevice *dev)
> -{
> -	struct eth_pdata *pdata = dev_get_plat(dev);
> -
> -	pdata->iobase = dev_read_addr(dev);
> -
> -	/* Get phy-mode / phy_interface from DT */
> -	pdata->phy_interface = dev_read_phy_mode(dev);
> -	if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
> -		return -EINVAL;
> -
> -	return 0;
> -}
> -
>   static const struct udevice_id mvneta_ids[] = {
>   	{ .compatible = "marvell,armada-370-neta" },
>   	{ .compatible = "marvell,armada-xp-neta" },
> @@ -1833,7 +1818,6 @@ U_BOOT_DRIVER(mvneta) = {
>   	.name	= "mvneta",
>   	.id	= UCLASS_ETH,
>   	.of_match = mvneta_ids,
> -	.of_to_plat = mvneta_of_to_plat,
>   	.probe	= mvneta_probe,
>   	.ops	= &mvneta_ops,
>   	.priv_auto	= sizeof(struct mvneta_port),

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list