[PATCH u-boot-marvell 01/19] net: mvneta: Get rid of platdata
Ramon Fried
rfried.dev at gmail.com
Sun May 1 01:28:02 CEST 2022
On Wed, Apr 27, 2022 at 1:42 PM Marek Behún <kabel at kernel.org> wrote:
>
> From: Marek Behún <marek.behun at nic.cz>
>
> Drop .of_to_plat() from the mvneta driver and parse the two properties
> in .probe().
>
> Signed-off-by: Marek Behún <marek.behun at nic.cz>
> ---
> drivers/net/mvneta.c | 24 ++++--------------------
> 1 file changed, 4 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
> index 15dc714058..d1c5f7930d 100644
> --- a/drivers/net/mvneta.c
> +++ b/drivers/net/mvneta.c
> @@ -1692,7 +1692,6 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
>
> static int mvneta_probe(struct udevice *dev)
> {
> - struct eth_pdata *pdata = dev_get_plat(dev);
> struct mvneta_port *pp = dev_get_priv(dev);
> #if CONFIG_IS_ENABLED(DM_GPIO)
> struct ofnode_phandle_args sfp_args;
> @@ -1729,7 +1728,10 @@ static int mvneta_probe(struct udevice *dev)
> buffer_loc.rx_buffers = (phys_addr_t)(bd_space + size);
> }
>
> - pp->base = (void __iomem *)pdata->iobase;
> + pp->base = dev_read_addr_ptr(dev);
> + pp->phy_interface = dev_read_phy_mode(dev);
> + if (pp->phy_interface == PHY_INTERFACE_MODE_NA)
> + return -EINVAL;
>
> /* Configure MBUS address windows */
> if (device_is_compatible(dev, "marvell,armada-3700-neta"))
> @@ -1737,9 +1739,6 @@ static int mvneta_probe(struct udevice *dev)
> else
> mvneta_conf_mbus_windows(pp);
>
> - /* PHY interface is already decoded in mvneta_of_to_plat() */
> - pp->phy_interface = pdata->phy_interface;
> -
> /* fetch 'fixed-link' property from 'neta' node */
> fl_node = fdt_subnode_offset(blob, node, "fixed-link");
> if (fl_node != -FDT_ERR_NOTFOUND) {
> @@ -1808,20 +1807,6 @@ static const struct eth_ops mvneta_ops = {
> .write_hwaddr = mvneta_write_hwaddr,
> };
>
> -static int mvneta_of_to_plat(struct udevice *dev)
> -{
> - struct eth_pdata *pdata = dev_get_plat(dev);
> -
> - pdata->iobase = dev_read_addr(dev);
> -
> - /* Get phy-mode / phy_interface from DT */
> - pdata->phy_interface = dev_read_phy_mode(dev);
> - if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> static const struct udevice_id mvneta_ids[] = {
> { .compatible = "marvell,armada-370-neta" },
> { .compatible = "marvell,armada-xp-neta" },
> @@ -1833,7 +1818,6 @@ U_BOOT_DRIVER(mvneta) = {
> .name = "mvneta",
> .id = UCLASS_ETH,
> .of_match = mvneta_ids,
> - .of_to_plat = mvneta_of_to_plat,
> .probe = mvneta_probe,
> .ops = &mvneta_ops,
> .priv_auto = sizeof(struct mvneta_port),
> --
> 2.35.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
More information about the U-Boot
mailing list