[PATCH 5/7] clk: sunxi: Convert driver private data to platform data

Samuel Holland samuel at sholland.org
Mon May 9 07:29:35 CEST 2022


All of the driver private data should really be platform data since it
is determined statically (selected by the compatible string or extracted
from the devicetree). Move everything to platform data, so it can be
provided when binding the driver. This is useful for SPL, or for
instantiating the driver as part of an MFD.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

 drivers/clk/sunxi/clk_sunxi.c | 41 ++++++++++++++++++++---------------
 include/clk/sunxi.h           |  4 ++--
 2 files changed, 26 insertions(+), 19 deletions(-)

diff --git a/drivers/clk/sunxi/clk_sunxi.c b/drivers/clk/sunxi/clk_sunxi.c
index 7d9e6029ff..cadfca767b 100644
--- a/drivers/clk/sunxi/clk_sunxi.c
+++ b/drivers/clk/sunxi/clk_sunxi.c
@@ -15,19 +15,19 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 
-static const struct ccu_clk_gate *priv_to_gate(struct ccu_priv *priv,
+static const struct ccu_clk_gate *plat_to_gate(struct ccu_plat *plat,
 					       unsigned long id)
 {
-	if (id >= priv->desc->num_gates)
+	if (id >= plat->desc->num_gates)
 		return NULL;
 
-	return &priv->desc->gates[id];
+	return &plat->desc->gates[id];
 }
 
 static int sunxi_set_gate(struct clk *clk, bool on)
 {
-	struct ccu_priv *priv = dev_get_priv(clk->dev);
-	const struct ccu_clk_gate *gate = priv_to_gate(priv, clk->id);
+	struct ccu_plat *plat = dev_get_plat(clk->dev);
+	const struct ccu_clk_gate *gate = plat_to_gate(plat, clk->id);
 	u32 reg;
 
 	if (!gate || !(gate->flags & CCU_CLK_F_IS_VALID)) {
@@ -38,13 +38,13 @@ static int sunxi_set_gate(struct clk *clk, bool on)
 	debug("%s: (CLK#%ld) off#0x%x, BIT(%d)\n", __func__,
 	      clk->id, gate->off, ilog2(gate->bit));
 
-	reg = readl(priv->base + gate->off);
+	reg = readl(plat->base + gate->off);
 	if (on)
 		reg |= gate->bit;
 	else
 		reg &= ~gate->bit;
 
-	writel(reg, priv->base + gate->off);
+	writel(reg, plat->base + gate->off);
 
 	return 0;
 }
@@ -71,19 +71,10 @@ static int sunxi_clk_bind(struct udevice *dev)
 
 static int sunxi_clk_probe(struct udevice *dev)
 {
-	struct ccu_priv *priv = dev_get_priv(dev);
 	struct clk_bulk clk_bulk;
 	struct reset_ctl_bulk rst_bulk;
 	int ret;
 
-	priv->base = dev_read_addr_ptr(dev);
-	if (!priv->base)
-		return -ENOMEM;
-
-	priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev);
-	if (!priv->desc)
-		return -EINVAL;
-
 	ret = clk_get_bulk(dev, &clk_bulk);
 	if (!ret)
 		clk_enable_bulk(&clk_bulk);
@@ -95,6 +86,21 @@ static int sunxi_clk_probe(struct udevice *dev)
 	return 0;
 }
 
+static int sunxi_clk_of_to_plat(struct udevice *dev)
+{
+	struct ccu_plat *plat = dev_get_plat(dev);
+
+	plat->base = dev_read_addr_ptr(dev);
+	if (!plat->base)
+		return -ENOMEM;
+
+	plat->desc = (const struct ccu_desc *)dev_get_driver_data(dev);
+	if (!plat->desc)
+		return -EINVAL;
+
+	return 0;
+}
+
 extern const struct ccu_desc a10_ccu_desc;
 extern const struct ccu_desc a10s_ccu_desc;
 extern const struct ccu_desc a23_ccu_desc;
@@ -205,6 +211,7 @@ U_BOOT_DRIVER(sunxi_clk) = {
 	.of_match	= sunxi_clk_ids,
 	.bind		= sunxi_clk_bind,
 	.probe		= sunxi_clk_probe,
-	.priv_auto	= sizeof(struct ccu_priv),
+	.of_to_plat	= sunxi_clk_of_to_plat,
+	.plat_auto	= sizeof(struct ccu_plat),
 	.ops		= &sunxi_clk_ops,
 };
diff --git a/include/clk/sunxi.h b/include/clk/sunxi.h
index 11caf12b17..e90e078972 100644
--- a/include/clk/sunxi.h
+++ b/include/clk/sunxi.h
@@ -70,12 +70,12 @@ struct ccu_desc {
 };
 
 /**
- * struct ccu_priv - sunxi clock control unit
+ * struct ccu_plat - sunxi clock control unit platform data
  *
  * @base:	base address
  * @desc:	ccu descriptor
  */
-struct ccu_priv {
+struct ccu_plat {
 	void *base;
 	const struct ccu_desc *desc;
 };
-- 
2.35.1



More information about the U-Boot mailing list