[PATCH v2 07/12] configs: stm32f746-disco: Migrate SPL flags to defconfig

[Patrice CHOTARD]

On 4/27/22 13:53, Patrice Chotard wrote:
> Migrate SPL flags to stm32f746-disco_spl_defconfig
> 
> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm/mach-stm32/Kconfig           | 20 --------------------
>  configs/stm32f746-disco_spl_defconfig | 24 ++++++++++++++++++++----
>  2 files changed, 20 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
> index a439dbd10f..a44ebf2597 100644
> --- a/arch/arm/mach-stm32/Kconfig
> +++ b/arch/arm/mach-stm32/Kconfig
> @@ -25,26 +25,6 @@ config STM32F7
>  	select PINCTRL
>  	select PINCTRL_STM32
>  	select RAM
> -	select SPL
> -	select SPL_BOARD_INIT
> -	select SPL_CLK
> -	select SPL_DM
> -	select SPL_DM_RESET
> -	select SPL_DM_SEQ_ALIAS
> -	select SPL_DRIVERS_MISC
> -	select SPL_GPIO
> -	select SPL_LIBCOMMON_SUPPORT
> -	select SPL_LIBGENERIC_SUPPORT
> -	select SPL_MTD_SUPPORT
> -	select SPL_OF_CONTROL
> -	select SPL_OF_LIBFDT
> -	select SPL_OF_TRANSLATE
> -	select SPL_PINCTRL
> -	select SPL_RAM
> -	select SPL_SERIAL
> -	select SPL_SYS_MALLOC_SIMPLE
> -	select SPL_TIMER
> -	select SPL_XIP_SUPPORT
>  	select STM32_RCC
>  	select STM32_RESET
>  	select STM32_SDRAM
> diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
> index 0133867942..9fef65fa7b 100644
> --- a/configs/stm32f746-disco_spl_defconfig
> +++ b/configs/stm32f746-disco_spl_defconfig
> @@ -3,12 +3,18 @@ CONFIG_ARCH_STM32=y
>  CONFIG_SYS_TEXT_BASE=0x08008000
>  CONFIG_SYS_MALLOC_LEN=0x100000
>  CONFIG_SYS_MALLOC_F_LEN=0xE00
> +CONFIG_SPL_GPIO=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
>  CONFIG_NR_DRAM_BANKS=1
>  CONFIG_ENV_SIZE=0x2000
>  CONFIG_DEFAULT_DEVICE_TREE="stm32f746-disco"
>  CONFIG_SPL_TEXT_BASE=0x8000000
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_DRIVERS_MISC=y
>  CONFIG_STM32F7=y
>  CONFIG_TARGET_STM32F746_DISCO=y
> +CONFIG_SPL=y
>  CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>  CONFIG_SYS_LOAD_ADDR=0x8008000
>  CONFIG_DISTRO_DEFAULTS=y
> @@ -20,6 +26,11 @@ CONFIG_USE_BOOTARGS=y
>  CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_BOARD_LATE_INIT=y
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SPL_MTD_SUPPORT=y
> +CONFIG_SPL_XIP_SUPPORT=y
> +CONFIG_SPL_DM_RESET=y
>  CONFIG_SYS_PROMPT="U-Boot > "
>  CONFIG_CMD_GPT=y
>  # CONFIG_RANDOM_UUID is not set
> @@ -31,15 +42,16 @@ CONFIG_CMD_LINK_LOCAL=y
>  CONFIG_CMD_BMP=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_TIMER=y
> -# CONFIG_SPL_DOS_PARTITION is not set
>  # CONFIG_ISO_PARTITION is not set
> -# CONFIG_SPL_EFI_PARTITION is not set
>  CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_NETCONSOLE=y
> -# CONFIG_SPL_BLK is not set
> -# CONFIG_SPL_DM_MMC is not set
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_OF_TRANSLATE=y
> +CONFIG_SPL_CLK=y
>  CONFIG_ARM_PL180_MMCI=y
>  CONFIG_MTD=y
>  CONFIG_DM_MTD=y
> @@ -53,9 +65,13 @@ CONFIG_DM_ETH=y
>  CONFIG_ETH_DESIGNWARE=y
>  CONFIG_MII=y
>  # CONFIG_PINCTRL_FULL is not set
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_SPL_RAM=y
> +CONFIG_SPECIFY_CONSOLE_INDEX=y
>  CONFIG_SPI=y
>  CONFIG_DM_SPI=y
>  CONFIG_STM32_QSPI=y
> +CONFIG_SPL_TIMER=y
>  CONFIG_DM_VIDEO=y
>  CONFIG_BACKLIGHT_GPIO=y
>  CONFIG_VIDEO_STM32=y
Applied to u-boot-stm32

Thanks
Patrice