[PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock

[Sean Anderson]

On 4/26/22 8:37 AM, Patrick Delaunay wrote:
> ck_usbo_48m is generated by usbphyc PLL and used by OTG controller
> for Full-Speed use cases with dedicated Full-Speed transceiver.
> 
> ck_usbo_48m is available as soon as the PLL is enabled.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>   drivers/phy/phy-stm32-usbphyc.c | 79 +++++++++++++++++++++++++++++++++
>   1 file changed, 79 insertions(+)
> 
> diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
> index 16c8799eca..e0b8fcb8f2 100644
> --- a/drivers/phy/phy-stm32-usbphyc.c
> +++ b/drivers/phy/phy-stm32-usbphyc.c
> @@ -7,6 +7,7 @@
>   
>   #include <common.h>
>   #include <clk.h>
> +#include <clk-uclass.h>
>   #include <div64.h>
>   #include <dm.h>
>   #include <fdtdec.h>
> @@ -17,6 +18,7 @@
>   #include <usb.h>
>   #include <asm/io.h>
>   #include <dm/device_compat.h>
> +#include <dm/lists.h>
>   #include <linux/bitops.h>
>   #include <linux/delay.h>
>   #include <power/regulator.h>
> @@ -49,6 +51,9 @@
>   #define PLL_INFF_MIN_RATE	19200000 /* in Hz */
>   #define PLL_INFF_MAX_RATE	38400000 /* in Hz */
>   
> +/* USBPHYC_CLK48 */
> +#define USBPHYC_CLK48_FREQ	48000000 /* in Hz */
> +
>   struct pll_params {
>   	u8 ndiv;
>   	u16 frac;
> @@ -355,6 +360,16 @@ static const struct phy_ops stm32_usbphyc_phy_ops = {
>   	.of_xlate = stm32_usbphyc_of_xlate,
>   };
>   
> +static int stm32_usbphyc_bind(struct udevice *dev)
> +{
> +	int ret;
> +
> +	ret = device_bind_driver_to_node(dev, "stm32-usbphyc-clk", "ck_usbo_48m",
> +					 dev_ofnode(dev), NULL);
> +
> +	return log_ret(ret);
> +}
> +
>   static int stm32_usbphyc_probe(struct udevice *dev)
>   {
>   	struct stm32_usbphyc *usbphyc = dev_get_priv(dev);
> @@ -444,6 +459,70 @@ U_BOOT_DRIVER(stm32_usb_phyc) = {
>   	.id = UCLASS_PHY,
>   	.of_match = stm32_usbphyc_of_match,
>   	.ops = &stm32_usbphyc_phy_ops,
> +	.bind = stm32_usbphyc_bind,
>   	.probe = stm32_usbphyc_probe,
>   	.priv_auto	= sizeof(struct stm32_usbphyc),
>   };
> +
> +struct stm32_usbphyc_clk {
> +	bool enable;
> +};
> +
> +static ulong stm32_usbphyc_clk48_get_rate(struct clk *clk)
> +{
> +	return USBPHYC_CLK48_FREQ;

What is the relationship between this clock and the PLL?

> +}
> +
> +static int stm32_usbphyc_clk48_enable(struct clk *clk)
> +{
> +	struct stm32_usbphyc_clk *usbphyc_clk = dev_get_priv(clk->dev);
> +	struct stm32_usbphyc *usbphyc;
> +	int ret;
> +
> +	if (usbphyc_clk->enable)
> +		return 0;
> +
> +	usbphyc = dev_get_priv(clk->dev->parent);
> +
> +	/* ck_usbo_48m is generated by usbphyc PLL */
> +	ret = stm32_usbphyc_pll_enable(usbphyc);
> +	if (ret)
> +		return ret;
> +
> +	usbphyc_clk->enable = true;
> +
> +	return 0;
> +}
> +
> +static int stm32_usbphyc_clk48_disable(struct clk *clk)
> +{
> +	struct stm32_usbphyc_clk *usbphyc_clk = dev_get_priv(clk->dev);
> +	struct stm32_usbphyc *usbphyc;
> +	int ret;
> +
> +	if (!usbphyc_clk->enable)
> +		return 0;
> +
> +	usbphyc = dev_get_priv(clk->dev->parent);
> +
> +	ret = stm32_usbphyc_pll_disable(usbphyc);
> +	if (ret)
> +		return ret;
> +
> +	usbphyc_clk->enable = false;
> +
> +	return 0;
> +}
> +
> +const struct clk_ops usbphyc_clk48_ops = {
> +	.get_rate = stm32_usbphyc_clk48_get_rate,
> +	.enable = stm32_usbphyc_clk48_enable,
> +	.disable = stm32_usbphyc_clk48_disable,
> +};
> +
> +U_BOOT_DRIVER(stm32_usb_phyc_clk) = {
> +	.name = "stm32-usbphyc-clk",
> +	.id = UCLASS_CLK,
> +	.ops = &usbphyc_clk48_ops,
> +	.priv_auto = sizeof(struct stm32_usbphyc_clk),
> +};
> 

I see that in the next patch you call this device from drivers/clk/clk_stm32mp1.c

Why is this clock a separate driver from the clock driver?

--Sean