[PATCH 08/10] board: sl28: add user friendly names for the boot sources

[Michael Walle]

During startup the SPL will print where the u-boot proper is read from.
Instead of using the default names, provide more user friendly names.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 board/kontron/sl28/spl.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/board/kontron/sl28/spl.c b/board/kontron/sl28/spl.c
index b1fefc22b2..ffaf517a8b 100644
--- a/board/kontron/sl28/spl.c
+++ b/board/kontron/sl28/spl.c
@@ -95,6 +95,22 @@ unsigned int spl_spi_get_uboot_offs(struct spi_flash *flash)
 	}
 }
 
+const char *spl_board_loader_name(u32 boot_device)
+{
+	enum boot_source src = sl28_boot_source();
+
+	switch (src) {
+	case BOOT_SOURCE_SDHC:
+		return "SD card (Test mode)";
+	case BOOT_SOURCE_SPI:
+		return "Failsafe SPI flash";
+	case BOOT_SOURCE_I2C:
+		return "SPI flash";
+	case BOOT_SOURCE_MMC:
+		return "eMMC";
+	default:
+		return "(unknown)";
+	}
 }
 
 int board_early_init_f(void)
-- 
2.30.2