[PATCH v2 5/8] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards

Philip Oberfichtner pro at denx.de
Fri May 20 10:46:23 CEST 2022


Firstly the FEC can now use the regulator reg_eth_vio from
imx6qdl-dhcom-som.dtsi instead of defining its own.

Secondly the &fec node is moved to the more generic SoM device tree
file, because it can be used by multiple boards.

Reviewed-by: Marek Vasut <marex at denx.de>
Signed-off-by: Philip Oberfichtner <pro at denx.de>

---

Changes in v2:
- Reviewed-by Marek

 arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi | 13 -------------
 arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi      |  7 +++++++
 2 files changed, 7 insertions(+), 13 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
index a1ffb1d6fc..0673c21e3c 100644
--- a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi
@@ -5,19 +5,6 @@
 
 #include "imx6qdl-dhcom-u-boot.dtsi"
 
-/ {
-	fec_vio: regulator-fec {
-		compatible = "regulator-fixed";
-
-		regulator-name = "fec-vio";
-		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
-	};
-};
-
 &fec {
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-reset-post-delay = <10>;
-
-	phy-supply = <&fec_vio>;
 };
diff --git a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
index 91545ab6e9..190567ab7b 100644
--- a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+)
 /*
  * Copyright (C) 2020 Harald Seiler <hws at denx.de>
+ * Copyright (C) 2022 Philip Oberfichtner <pro at denx.de>
  */
 
 / {
@@ -9,6 +10,12 @@
 	};
 };
 
+&fec {
+	phy-reset-duration = <1>;
+	phy-reset-post-delay = <10>;
+	phy-supply = <&reg_eth_vio>;
+};
+
 &i2c3 {
 	eeprom0: eeprom at 50 {
 	};
-- 
2.34.1



More information about the U-Boot mailing list