[PATCH V3 0/7] arm64: binman: use binman symbols for imx
Peng Fan (OSS)
peng.fan at oss.nxp.com
Tue May 10 15:51:25 CEST 2022
From: Peng Fan <peng.fan at nxp.com>
V3:
Add R-b/T-b
Fix build warning
V2:
resolve some CI failure
include patch 7
binman symbol is a good feature, but only used on X86 for now. This patchset
is to use it for i.MX8M platform.
The current imx8m ddr phy firmware consumes lots of space, because we pad
them to the largest 32KB and 16KB for IMEM and DMEM.
With this patchset we use binman symbols to get firmware location and size,
we could save near 36KB with i.MX8MP-EVK.
Please help check and test
Peng Fan (7):
spl: guard u_boot_any with X86
arm: dts: imx8m: update binman ddr firmware node name
armv8: u-boot-spl.lds: mark __image_copy_start as symbol
tools: binman: section: replace @ with -
ddr: imx8m: helper: load ddr firmware according to binman symbols
arm: dts: imx8m: shrink ddr firmware size to actual file size
binman_sym: guard with CONFIG_SPL_BINMAN_SYMBOLS
arch/arm/cpu/armv8/u-boot-spl.lds | 2 +-
arch/arm/dts/imx8mm-u-boot.dtsi | 16 +++---
arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 8 +--
.../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 4 +-
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 8 +--
arch/arm/dts/imx8mn-evk-u-boot.dtsi | 8 +--
.../dts/imx8mn-var-som-symphony-u-boot.dtsi | 8 +--
arch/arm/dts/imx8mn-venice-u-boot.dtsi | 16 +++---
arch/arm/dts/imx8mp-u-boot.dtsi | 8 +--
arch/arm/dts/imx8mq-cm-u-boot.dtsi | 8 +--
arch/arm/dts/imx8mq-u-boot.dtsi | 16 +++---
common/spl/spl.c | 8 ++-
common/spl/spl_ram.c | 4 ++
drivers/ddr/imx/imx8m/helper.c | 51 ++++++++++++++++---
include/binman_sym.h | 2 +-
tools/binman/etype/section.py | 2 +-
tools/binman/test/u_boot_binman_syms.c | 1 +
tools/binman/test/u_boot_binman_syms_size.c | 1 +
18 files changed, 108 insertions(+), 63 deletions(-)
--
2.36.0
More information about the U-Boot
mailing list