[PATCH] net: ftgmac100: use bus name in mdio error messages

[Zev Weiss]

Previously we'd been using a device name retrieved via
ftgmac100_data->phydev, but the mdio read/write functions may be
called before that member is initialized in ftgmac100_phy_init(),
leading to a NULL pointer dereference while printing the error message
issued if the mdio access fails.  We can instead use bus->name, which
is already available at that point.

Signed-off-by: Zev Weiss <zev at bewilderbeest.net>
Fixes: 538e75d3fc54 ("net: ftgmac100: add MDIO bus and phylib support")
---
 drivers/net/ftgmac100.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c
index 78779d7d60b9..74261d14e548 100644
--- a/drivers/net/ftgmac100.c
+++ b/drivers/net/ftgmac100.c
@@ -119,7 +119,7 @@ static int ftgmac100_mdio_read(struct mii_dev *bus, int phy_addr, int dev_addr,
 				 FTGMAC100_MDIO_TIMEOUT_USEC);
 	if (ret) {
 		pr_err("%s: mdio read failed (phy:%d reg:%x)\n",
-		       priv->phydev->dev->name, phy_addr, reg_addr);
+		       bus->name, phy_addr, reg_addr);
 		return ret;
 	}
 
@@ -151,7 +151,7 @@ static int ftgmac100_mdio_write(struct mii_dev *bus, int phy_addr, int dev_addr,
 				 FTGMAC100_MDIO_TIMEOUT_USEC);
 	if (ret) {
 		pr_err("%s: mdio write failed (phy:%d reg:%x)\n",
-		       priv->phydev->dev->name, phy_addr, reg_addr);
+		       bus->name, phy_addr, reg_addr);
 	}
 
 	return ret;
-- 
2.36.1