[PATCH] board: st: stm32mp1: Consider USB cable connected when boot device is USB

[Patrice CHOTARD]

On 5/6/22 10:51, Patrick DELAUNAY wrote:
> Hi,
> 
> On 4/22/22 09:39, Patrice Chotard wrote:
>> Always consider USB cable is connected when USB boot device is detected.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
>> ---
>>
>>   board/st/stm32mp1/stm32mp1.c | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
>> index fff1880e5b..62a5fc23e6 100644
>> --- a/board/st/stm32mp1/stm32mp1.c
>> +++ b/board/st/stm32mp1/stm32mp1.c
>> @@ -199,6 +199,13 @@ int g_dnl_board_usb_cable_connected(void)
>>       if (!IS_ENABLED(CONFIG_USB_GADGET_DWC2_OTG))
>>           return -ENODEV;
>>   +    /*
>> +     * In case of USB boot device is detected, consider USB cable is
>> +     * connected
>> +     */
>> +    if ((get_bootmode() & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_USB)
>> +        return true;
>> +
>>       /* if typec stusb160x is present, means DK1 or DK2 board */
>>       ret = stusb160x_cable_connected();
>>       if (ret >= 0)
> 
> 
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> 
> Thanks
> Patrick
> 
> 
Applied to u-boot-stm32

Thanks
Patrice