[PATCH 08/16] arm: stm32mp: add support of STM32MP13x
Patrice CHOTARD
patrice.chotard at foss.st.com
Fri May 20 08:49:53 CEST 2022
Hi Patrick
2 minor typo below
Thanks
Patrice
On 5/6/22 16:06, Patrick Delaunay wrote:
> Introduce the code in mach-stm32mp and the configuration file
> stm32mp13_defconfig for the new STM32MP family.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>
> arch/arm/mach-stm32mp/Kconfig | 21 +++-
> arch/arm/mach-stm32mp/Kconfig.13x | 57 +++++++++
> arch/arm/mach-stm32mp/Makefile | 1 +
> arch/arm/mach-stm32mp/cpu.c | 3 +
> arch/arm/mach-stm32mp/fdt.c | 3 +
> arch/arm/mach-stm32mp/include/mach/stm32.h | 26 ++++
> .../arm/mach-stm32mp/include/mach/sys_proto.h | 16 ++-
> arch/arm/mach-stm32mp/stm32mp13x.c | 115 ++++++++++++++++++
> board/st/stm32mp1/Kconfig | 15 +++
> board/st/stm32mp1/MAINTAINERS | 2 +
> configs/stm32mp15_basic_defconfig | 2 +-
> configs/stm32mp15_defconfig | 2 +-
> configs/stm32mp15_trusted_defconfig | 2 +-
> include/configs/stm32mp13_common.h | 106 ++++++++++++++++
> include/configs/stm32mp13_st_common.h | 17 +++
> include/configs/stm32mp15_common.h | 4 +-
> 16 files changed, 385 insertions(+), 7 deletions(-)
> create mode 100644 arch/arm/mach-stm32mp/Kconfig.13x
> create mode 100644 arch/arm/mach-stm32mp/stm32mp13x.c
> create mode 100644 include/configs/stm32mp13_common.h
> create mode 100644 include/configs/stm32mp13_st_common.h
>
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index 3b4936c326..db47baba6d 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -37,6 +37,24 @@ choice
> prompt "Select STMicroelectronics STM32MPxxx Soc"
> default STM32MP15x
>
> +config STM32MP13x
> + bool "Support STMicroelectronics STM32MP13x Soc"
> + select ARM_SMCCC
> + select CPU_V7A
> + select CPU_V7_HAS_NONSEC
> + select CPU_V7_HAS_VIRT
> + select OF_BOARD
> + select OF_BOARD_SETUP
> + select PINCTRL_STM32
> + select STM32_RCC
> + select STM32_RESET
> + select STM32_SERIAL
> + select SYS_ARCH_TIMER
> + imply CMD_NVEDIT_INFO
> + help
> + support of STMicroelectronics SOC STM32MP13x family
> + STMicroelectronics MPU with core ARMv7
> +
> config STM32MP15x
> bool "Support STMicroelectronics STM32MP15x Soc"
> select ARCH_SUPPORT_PSCI
> @@ -85,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
>
> config STM32_ETZPC
> bool "STM32 Extended TrustZone Protection"
> - depends on STM32MP15x
> + depends on STM32MP15x || STM32MP13x
> default y
> imply BOOTP_SERVERIP
> help
> @@ -108,6 +126,7 @@ config CMD_STM32KEY
> This command is used to evaluate the secure boot on stm32mp SOC,
> it is deactivated by default in real products.
>
> +source "arch/arm/mach-stm32mp/Kconfig.13x"
> source "arch/arm/mach-stm32mp/Kconfig.15x"
>
> source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
> diff --git a/arch/arm/mach-stm32mp/Kconfig.13x b/arch/arm/mach-stm32mp/Kconfig.13x
> new file mode 100644
> index 0000000000..5fc000986e
> --- /dev/null
> +++ b/arch/arm/mach-stm32mp/Kconfig.13x
> @@ -0,0 +1,57 @@
> +if STM32MP13x
> +
> +choice
> + prompt "STM32MP13x board select"
> + optional
> +
> +config TARGET_ST_STM32MP13x
> + bool "STMicroelectronics STM32MP13x boards"
> + imply BOOTSTAGE
> + imply CMD_BOOTSTAGE
> + imply CMD_CLS if CMD_BMP
> + imply DISABLE_CONSOLE
> + imply PRE_CONSOLE_BUFFER
> + imply SILENT_CONSOLE
> + help
> + target the STMicroelectronics board with SOC STM32MP13x
> + managed by board/st/stm32mp1.
> + The difference between board are managed with devicetree
> +
> +endchoice
> +
> +config SYS_TEXT_BASE
> + default 0xC0000000
> +
> +config PRE_CON_BUF_ADDR
> + default 0xC0800000
> +
> +config PRE_CON_BUF_SZ
> + default 4096
> +
> +config BOOTSTAGE_STASH_ADDR
> + default 0xC3000000
> +
> +if BOOTCOUNT_GENERIC
> +config SYS_BOOTCOUNT_SINGLEWORD
> + default y
> +
> +# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(31)
> +config SYS_BOOTCOUNT_ADDR
> + default 0x5C00A17C
> +endif
> +
> +if DEBUG_UART
> +
> +# debug on UART4 by default
> +config DEBUG_UART_BASE
> + default 0x40010000
> +
> +# clock source is HSI on reset
> +config DEBUG_UART_CLOCK
> + default 48000000 if STM32_FPGA
> + default 64000000
> +endif
> +
> +source "board/st/stm32mp1/Kconfig"
> +
> +endif
> diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
> index 0ffec6e02f..1db9057e04 100644
> --- a/arch/arm/mach-stm32mp/Makefile
> +++ b/arch/arm/mach-stm32mp/Makefile
> @@ -8,6 +8,7 @@ obj-y += dram_init.o
> obj-y += syscon.o
> obj-y += bsec.o
>
> +obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
> obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
>
> ifdef CONFIG_SPL_BUILD
> diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
> index b808964d3e..240960ada4 100644
> --- a/arch/arm/mach-stm32mp/cpu.c
> +++ b/arch/arm/mach-stm32mp/cpu.c
> @@ -52,8 +52,11 @@ void dram_bank_mmu_setup(int bank)
> enum dcache_option option;
>
> if (IS_ENABLED(CONFIG_SPL_BUILD)) {
> +/* STM32_SYSRAM_BASE exist only when SPL is supported */
> +#ifdef CONFIG_SPL
> start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE);
> size = ALIGN(STM32_SYSRAM_SIZE, MMU_SECTION_SIZE);
> +#endif
> } else if (gd->flags & GD_FLG_RELOC) {
> /* bd->bi_dram is available only after relocation */
> start = bd->bi_dram[bank].start;
> diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
> index 969e7d94e9..ad45728949 100644
> --- a/arch/arm/mach-stm32mp/fdt.c
> +++ b/arch/arm/mach-stm32mp/fdt.c
> @@ -259,6 +259,9 @@ int ft_system_setup(void *blob, struct bd_info *bd)
> u32 pkg, cpu;
> char name[SOC_NAME_SIZE];
>
> + if (IS_ENABLED(CONFIG_STM32MP13x))
> + return 0;
> +
> soc = fdt_path_offset(blob, "/soc");
> if (soc < 0)
> return soc;
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index 47e88fc3dc..cdb58fd40e 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -17,7 +17,9 @@
> #define STM32_RCC_BASE 0x50000000
> #define STM32_PWR_BASE 0x50001000
> #define STM32_SYSCFG_BASE 0x50020000
> +#ifdef CONFIG_STM32MP15x
> #define STM32_DBGMCU_BASE 0x50081000
> +#endif
> #define STM32_FMC2_BASE 0x58002000
> #define STM32_DDRCTRL_BASE 0x5A003000
> #define STM32_DDRPHYC_BASE 0x5A004000
> @@ -26,8 +28,14 @@
> #define STM32_STGEN_BASE 0x5C008000
> #define STM32_TAMP_BASE 0x5C00A000
>
> +#ifdef CONFIG_STM32MP15x
> #define STM32_USART1_BASE 0x5C000000
> #define STM32_USART2_BASE 0x4000E000
> +#endif
> +#ifdef CONFIG_STM32MP13x
> +#define STM32_USART1_BASE 0x4c000000
> +#define STM32_USART2_BASE 0x4c001000
> +#endif
> #define STM32_USART3_BASE 0x4000F000
> #define STM32_UART4_BASE 0x40010000
> #define STM32_UART5_BASE 0x40011000
> @@ -39,8 +47,10 @@
> #define STM32_SDMMC2_BASE 0x58007000
> #define STM32_SDMMC3_BASE 0x48004000
>
> +#ifdef CONFIG_STM32MP15x
> #define STM32_SYSRAM_BASE 0x2FFC0000
> #define STM32_SYSRAM_SIZE SZ_256K
> +#endif
>
> #define STM32_DDR_BASE 0xC0000000
> #define STM32_DDR_SIZE SZ_1G
> @@ -98,6 +108,8 @@ enum boot_device {
>
> /* TAMP registers */
> #define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)
> +
> +#ifdef CONFIG_STM32MP15x
> #define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
> #define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
> #define TAMP_COPRO_RSC_TBL_ADDRESS TAMP_BACKUP_REGISTER(17)
> @@ -111,6 +123,12 @@ enum boot_device {
> #define TAMP_COPRO_STATE_CSTOP 3
> #define TAMP_COPRO_STATE_STANDBY 4
> #define TAMP_COPRO_STATE_CRASH 5
> +#endif
> +
> +#ifdef CONFIG_STM32MP13x
> +#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31)
> +#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30)
> +#endif
>
> #define TAMP_BOOT_MODE_MASK GENMASK(15, 8)
> #define TAMP_BOOT_MODE_SHIFT 8
> @@ -138,11 +156,19 @@ enum forced_boot_mode {
> #define STM32_BSEC_LOCK(id) (STM32_BSEC_LOCK_OFFSET + (id) * 4)
>
> /* BSEC OTP index */
> +#ifdef CONFIG_STM32MP15x
> #define BSEC_OTP_RPN 1
> #define BSEC_OTP_SERIAL 13
> #define BSEC_OTP_PKG 16
> #define BSEC_OTP_MAC 57
> #define BSEC_OTP_BOARD 59
> +#endif
> +#ifdef CONFIG_STM32MP13x
> +#define BSEC_OTP_RPN 1
> +#define BSEC_OTP_SERIAL 13
> +#define BSEC_OTP_MAC 57
> +#define BSEC_OTP_BOARD 60
> +#endif
>
> #endif /* __ASSEMBLY__ */
> #endif /* _MACH_STM32_H_ */
> diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
> index 8b61135aeb..829b3feebf 100644
> --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h
> +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
> @@ -3,7 +3,7 @@
> * Copyright (C) 2015-2017, STMicroelectronics - All Rights Reserved
> */
>
> -/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit7:0) */
> +/* ID = Device Version (bit31:16) + Device Part Number (RPN) (bit15:0) */
> #define CPU_STM32MP157Cxx 0x05000000
> #define CPU_STM32MP157Axx 0x05000001
> #define CPU_STM32MP153Cxx 0x05000024
> @@ -17,10 +17,24 @@
> #define CPU_STM32MP151Fxx 0x050000AE
> #define CPU_STM32MP151Dxx 0x050000AF
>
> +#define CPU_STM32MP135Cxx 0x05010000
> +#define CPU_STM32MP135Axx 0x05010001
> +#define CPU_STM32MP133Cxx 0x050100C0
> +#define CPU_STM32MP133Axx 0x050100C1
> +#define CPU_STM32MP131Cxx 0x050106C8
> +#define CPU_STM32MP131Axx 0x050106C9
> +#define CPU_STM32MP135Fxx 0x05010800
> +#define CPU_STM32MP135Dxx 0x05010801
> +#define CPU_STM32MP133Fxx 0x050108C0
> +#define CPU_STM32MP133Dxx 0x050108C1
> +#define CPU_STM32MP131Fxx 0x05010EC8
> +#define CPU_STM32MP131Dxx 0x05010EC9
> +
> /* return CPU_STMP32MP...Xxx constants */
> u32 get_cpu_type(void);
>
> #define CPU_DEV_STM32MP15 0x500
> +#define CPU_DEV_STM32MP13 0x501
>
> /* return CPU_DEV constants */
> u32 get_cpu_dev(void);
> diff --git a/arch/arm/mach-stm32mp/stm32mp13x.c b/arch/arm/mach-stm32mp/stm32mp13x.c
> new file mode 100644
> index 0000000000..38961310dc
> --- /dev/null
> +++ b/arch/arm/mach-stm32mp/stm32mp13x.c
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
> +/*
> + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
s/2020/2022
> + */
> +
> +#define LOG_CATEGORY LOGC_ARCH
> +
> +#include <common.h>
> +#include <log.h>
> +#include <syscon.h>
> +#include <asm/io.h>
> +#include <asm/arch/stm32.h>
> +#include <asm/arch/sys_proto.h>
> +
> +/* SYSCFG register */
> +#define SYSCFG_IDC_OFFSET 0x380
> +#define SYSCFG_IDC_DEV_ID_MASK GENMASK(11, 0)
> +#define SYSCFG_IDC_DEV_ID_SHIFT 0
> +#define SYSCFG_IDC_REV_ID_MASK GENMASK(31, 16)
> +#define SYSCFG_IDC_REV_ID_SHIFT 16
> +
> +/* Device Part Number (RPN) = OTP_DATA1 lower 11 bits */
> +#define RPN_SHIFT 0
> +#define RPN_MASK GENMASK(11, 0)
> +
> +static u32 read_idc(void)
> +{
> + void *syscfg = syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
> +
> + return readl(syscfg + SYSCFG_IDC_OFFSET);
> +}
> +
> +u32 get_cpu_dev(void)
> +{
> + return (read_idc() & SYSCFG_IDC_DEV_ID_MASK) >> SYSCFG_IDC_DEV_ID_SHIFT;
> +}
> +
> +u32 get_cpu_rev(void)
> +{
> + return (read_idc() & SYSCFG_IDC_REV_ID_MASK) >> SYSCFG_IDC_REV_ID_SHIFT;
> +}
> +
> +/* Get Device Part Number (RPN) from OTP */
> +static u32 get_cpu_rpn(void)
> +{
> + return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
> +}
> +
> +u32 get_cpu_type(void)
> +{
> + return (get_cpu_dev() << 16) | get_cpu_rpn();
> +}
> +
> +void get_soc_name(char name[SOC_NAME_SIZE])
> +{
> + char *cpu_s, *cpu_r;
> +
> + /* MPUs Part Numbers */
> + switch (get_cpu_type()) {
> + case CPU_STM32MP135Fxx:
> + cpu_s = "135F";
> + break;
> + case CPU_STM32MP135Dxx:
> + cpu_s = "135D";
> + break;
> + case CPU_STM32MP135Cxx:
> + cpu_s = "135C";
> + break;
> + case CPU_STM32MP135Axx:
> + cpu_s = "135A";
> + break;
> + case CPU_STM32MP133Fxx:
> + cpu_s = "133F";
> + break;
> + case CPU_STM32MP133Dxx:
> + cpu_s = "133D";
> + break;
> + case CPU_STM32MP133Cxx:
> + cpu_s = "133C";
> + break;
> + case CPU_STM32MP133Axx:
> + cpu_s = "133A";
> + break;
> + case CPU_STM32MP131Fxx:
> + cpu_s = "131F";
> + break;
> + case CPU_STM32MP131Dxx:
> + cpu_s = "131D";
> + break;
> + case CPU_STM32MP131Cxx:
> + cpu_s = "131C";
> + break;
> + case CPU_STM32MP131Axx:
> + cpu_s = "131A";
> + break;
> + default:
> + cpu_s = "????";
> + break;
> + }
> +
> + /* REVISION */
> + switch (get_cpu_rev()) {
> + case CPU_REV1:
> + cpu_r = "A";
> + break;
> + case CPU_REV1_1:
> + cpu_r = "Z";
> + break;
> + default:
> + cpu_r = "?";
> + break;
> + }
> +
> + snprintf(name, SOC_NAME_SIZE, "STM32MP%s Rev.%s", cpu_s, cpu_r);
> +}
> diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
> index 89e97aec2b..6ab8f80fa4 100644
> --- a/board/st/stm32mp1/Kconfig
> +++ b/board/st/stm32mp1/Kconfig
> @@ -11,3 +11,18 @@ config SYS_CONFIG_NAME
>
> source "board/st/common/Kconfig"
> endif
> +
> +if TARGET_ST_STM32MP13x
> +
> +config SYS_BOARD
> + default "stm32mp1"
> +
> +config SYS_VENDOR
> + default "st"
> +
> +config SYS_CONFIG_NAME
> + default "stm32mp13_st_common"
> +
> +source "board/st/common/Kconfig"
> +
> +endif
> diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
> index d57a49820e..c9252e90f4 100644
> --- a/board/st/stm32mp1/MAINTAINERS
> +++ b/board/st/stm32mp1/MAINTAINERS
> @@ -9,5 +9,7 @@ F: board/st/stm32mp1/
> F: configs/stm32mp15_defconfig
> F: configs/stm32mp15_basic_defconfig
> F: configs/stm32mp15_trusted_defconfig
> +F: include/configs/stm32mp13_common.h
> +F: include/configs/stm32mp13_st_common.h
> F: include/configs/stm32mp15_common.h
> F: include/configs/stm32mp15_st_common.h
> diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
> index 998947fe3d..587b087b99 100644
> --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -9,8 +9,8 @@ CONFIG_SPL_TEXT_BASE=0x2FFC2500
> CONFIG_SPL_MMC=y
> CONFIG_SPL=y
> CONFIG_CMD_STM32KEY=y
> -CONFIG_TARGET_ST_STM32MP15x=y
> CONFIG_TYPEC_STUSB160X=y
> +CONFIG_TARGET_ST_STM32MP15x=y
> CONFIG_ENV_OFFSET_REDUND=0x2C0000
> CONFIG_CMD_STM32PROG=y
> CONFIG_SPL_SPI_FLASH_SUPPORT=y
> diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
> index c4f06af732..da4013f1c9 100644
> --- a/configs/stm32mp15_defconfig
> +++ b/configs/stm32mp15_defconfig
> @@ -7,8 +7,8 @@ CONFIG_ENV_SECT_SIZE=0x40000
> CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
> CONFIG_DDR_CACHEABLE_SIZE=0x10000000
> CONFIG_CMD_STM32KEY=y
> -CONFIG_TARGET_ST_STM32MP15x=y
> CONFIG_TYPEC_STUSB160X=y
> +CONFIG_TARGET_ST_STM32MP15x=y
> CONFIG_ENV_OFFSET_REDUND=0x4C0000
> CONFIG_CMD_STM32PROG=y
> # CONFIG_ARMV7_NONSEC is not set
> diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
> index 7c2adb3eb0..73279a4cf6 100644
> --- a/configs/stm32mp15_trusted_defconfig
> +++ b/configs/stm32mp15_trusted_defconfig
> @@ -7,9 +7,9 @@ CONFIG_ENV_SECT_SIZE=0x40000
> CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
> CONFIG_DDR_CACHEABLE_SIZE=0x10000000
> CONFIG_CMD_STM32KEY=y
> +CONFIG_TYPEC_STUSB160X=y
> CONFIG_STM32MP15x_STM32IMAGE=y
> CONFIG_TARGET_ST_STM32MP15x=y
> -CONFIG_TYPEC_STUSB160X=y
> CONFIG_ENV_OFFSET_REDUND=0x2C0000
> CONFIG_CMD_STM32PROG=y
> # CONFIG_ARMV7_NONSEC is not set
> diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h
> new file mode 100644
> index 0000000000..799e3f053b
> --- /dev/null
> +++ b/include/configs/stm32mp13_common.h
> @@ -0,0 +1,106 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */
> +/*
> + * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
s/2021/2022
> + *
> + * Configuration settings for the STM32MP15x CPU
> + */
> +
> +#ifndef __CONFIG_STM32MP13_COMMMON_H
> +#define __CONFIG_STM32MP13_COMMMON_H
> +#include <linux/sizes.h>
> +#include <asm/arch/stm32.h>
> +
> +/*
> + * Configuration of the external SRAM memory used by U-Boot
> + */
> +#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_4M)
> +
> +/*
> + * Console I/O buffer size
> + */
> +#define CONFIG_SYS_CBSIZE SZ_1K
> +
> +/*
> + * For booting Linux, use the first 256 MB of memory, since this is
> + * the maximum mapped by the Linux kernel during initialization.
> + */
> +#define CONFIG_SYS_BOOTMAPSZ SZ_256M
> +
> +/* Extend size of kernel image for uncompression */
> +#define CONFIG_SYS_BOOTM_LEN SZ_32M
> +
> +/*MMC SD*/
> +#define CONFIG_SYS_MMC_MAX_DEVICE 2
> +
> +/* NAND support */
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +
> +/*****************************************************************************/
> +#ifdef CONFIG_DISTRO_DEFAULTS
> +/*****************************************************************************/
> +
> +#ifdef CONFIG_CMD_MMC
> +#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0)
> +#define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1)
> +#else
> +#define BOOT_TARGET_MMC0(func)
> +#define BOOT_TARGET_MMC1(func)
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + BOOT_TARGET_MMC1(func) \
> + BOOT_TARGET_MMC0(func)
> +
> +/*
> + * default bootcmd for stm32mp13:
> + * for mmc boot (eMMC, SD card), distro boot on the same mmc device
> + */
> +#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
> + "echo \"Boot over ${boot_device}${boot_instance}!\";" \
> + "run env_check;" \
> + "if test ${boot_device} = mmc;" \
> + "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
> + "run distro_bootcmd;" \
> + "fi;\0"
> +
> +#define STM32MP_EXTRA \
> + "env_check=if env info -p -d -q; then env save; fi\0" \
> + "boot_net_usb_start=true\0"
> +
> +#ifndef STM32MP_BOARD_EXTRA_ENV
> +#define STM32MP_BOARD_EXTRA_ENV
> +#endif
> +
> +#include <config_distro_bootcmd.h>
> +
> +/*
> + * memory layout for 32M uncompressed/compressed kernel,
> + * 1M fdt, 1M script, 1M pxe and 1M for overlay
> + * and the ramdisk at the end.
> + */
> +#define __KERNEL_ADDR_R __stringify(0xc2000000)
> +#define __FDT_ADDR_R __stringify(0xc4000000)
> +#define __SCRIPT_ADDR_R __stringify(0xc4100000)
> +#define __PXEFILE_ADDR_R __stringify(0xc4200000)
> +#define __FDTOVERLAY_ADDR_R __stringify(0xc4300000)
> +#define __RAMDISK_ADDR_R __stringify(0xc4400000)
> +
> +#define STM32MP_MEM_LAYOUT \
> + "kernel_addr_r=" __KERNEL_ADDR_R "\0" \
> + "fdt_addr_r=" __FDT_ADDR_R "\0" \
> + "scriptaddr=" __SCRIPT_ADDR_R "\0" \
> + "pxefile_addr_r=" __PXEFILE_ADDR_R "\0" \
> + "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
> + "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + STM32MP_MEM_LAYOUT \
> + STM32MP_BOOTCMD \
> + BOOTENV \
> + STM32MP_EXTRA \
> + STM32MP_BOARD_EXTRA_ENV
> +
> +#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
> +
> +#endif /* __CONFIG_STM32MP13_COMMMON_H */
> diff --git a/include/configs/stm32mp13_st_common.h b/include/configs/stm32mp13_st_common.h
> new file mode 100644
> index 0000000000..d73526f14e
> --- /dev/null
> +++ b/include/configs/stm32mp13_st_common.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */
> +/*
> + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
> + *
> + * Configuration settings for the STMicroelectonics STM32MP15x boards
> + */
> +
> +#ifndef __CONFIG_STM32MP13_ST_COMMON_H__
> +#define __CONFIG_STM32MP13_ST_COMMON_H__
> +
> +#define STM32MP_BOARD_EXTRA_ENV \
> + "usb_pgood_delay=1000\0" \
> + "console=ttySTM0\0"
> +
> +#include <configs/stm32mp13_common.h>
> +
> +#endif
> diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
> index 6b40cdb017..adfb2898b0 100644
> --- a/include/configs/stm32mp15_common.h
> +++ b/include/configs/stm32mp15_common.h
> @@ -14,7 +14,7 @@
> * Configuration of the external SRAM memory used by U-Boot
> */
> #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
> -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
> +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
>
> /*
> * Console I/O buffer size
> @@ -97,7 +97,7 @@
> BOOT_TARGET_PXE(func)
>
> /*
> - * default bootcmd for stm32mp1:
> + * default bootcmd for stm32mp15:
> * for serial/usb: execute the stm32prog command
> * for mmc boot (eMMC, SD card), distro boot on the same mmc device
> * for nand or spi-nand boot, distro boot with ubifs on UBI partition
More information about the U-Boot
mailing list