[PATCH 6/8] stm32mp: stm32prog: handle interruption during the first enumeration

[Patrice CHOTARD]

On 3/28/22 19:25, Patrick Delaunay wrote:
> When an interruption is received during the first USB enumeration
> used to received the FlashLayout, with handle ctrl-c, the second
> enumeration is not needed and the result for stm32prog_usb_loop
> is false (reset is not needed).
> 
> This patch avoids the need of a second ctrl to interrupt the command
> stm32prog.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
> index 82b702f93b..a8b57c4d8f 100644
> --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c
> @@ -206,9 +206,12 @@ bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)
>  	g_dnl_set_product(product);
>  
>  	if (stm32prog_data->phase == PHASE_FLASHLAYOUT) {
> +		/* forget any previous Control C */
> +		clear_ctrlc();
>  		ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu");
> -		if (ret || stm32prog_data->phase != PHASE_FLASHLAYOUT)
> -			return ret;
> +		/* DFU reset received, no error or CtrlC */
> +		if (ret || stm32prog_data->phase != PHASE_FLASHLAYOUT || had_ctrlc())
> +			return ret; /* true = reset on DFU error */
>  		/* prepare the second enumeration with the FlashLayout */
>  		stm32prog_dfu_init(data);
>  	}

Applied to u-boot-stm32

Thanks
Patrice