[PATCH v2 09/12] configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile

[Patrice CHOTARD]

On 4/27/22 13:53, Patrice Chotard wrote:
> As stm32f46-disco, stm32f769-disco and stm32746g-eval are very similar
> except their respective device tree file. These 3 boards uses the same
> TARGET_STM32F746_DISCO flag (so same include/configs/stm32f746-disco.h
> and same board file board/st/stm32f746-disco/stm32f746-disco.c)
> 
> To be able to compile these 3 boards, replace the hard-coded device-tree
> name in include/configs/stm32f746-disco.h by CONFIG_DEFAULT_DEVICE_TREE
> which is set in each board defconfig file with the correct value.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  include/configs/stm32f746-disco.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
> index b93acdcc1f..cc3d4b4449 100644
> --- a/include/configs/stm32f746-disco.h
> +++ b/include/configs/stm32f746-disco.h
> @@ -34,7 +34,7 @@
>  #include <config_distro_bootcmd.h>
>  #define CONFIG_EXTRA_ENV_SETTINGS				\
>  			"kernel_addr_r=0xC0008000\0"		\
> -			"fdtfile=stm32f746-disco.dtb\0"	\
> +			"fdtfile="CONFIG_DEFAULT_DEVICE_TREE".dtb\0"	\
>  			"fdt_addr_r=0xC0408000\0"		\
>  			"scriptaddr=0xC0418000\0"		\
>  			"pxefile_addr_r=0xC0428000\0" \
Applied to u-boot-stm32

Thanks
Patrice