[PATCH V2 5/7] ddr: imx8m: helper: load ddr firmware according to binman symbols

Peng Fan (OSS) peng.fan at oss.nxp.com
Sat May 7 13:03:59 CEST 2022


From: Peng Fan <peng.fan at nxp.com>

By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after
we update the binman dtsi to drop 0x8000/0x4000 length for the firmware.

And that could save binary size for many KBs.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/ddr/imx/imx8m/helper.c | 53 ++++++++++++++++++++++++++++------
 1 file changed, 44 insertions(+), 9 deletions(-)

diff --git a/drivers/ddr/imx/imx8m/helper.c b/drivers/ddr/imx/imx8m/helper.c
index f23904bf712..b10ba602665 100644
--- a/drivers/ddr/imx/imx8m/helper.c
+++ b/drivers/ddr/imx/imx8m/helper.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <binman_sym.h>
 #include <log.h>
 #include <spl.h>
 #include <asm/global_data.h>
@@ -25,15 +26,30 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DMEM_OFFSET_ADDR 0x00054000
 #define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
 
+binman_sym_declare(ulong, blob_ext_1, image_pos);
+binman_sym_declare(ulong, blob_ext_1, size);
+
+binman_sym_declare(ulong, blob_ext_2, image_pos);
+binman_sym_declare(ulong, blob_ext_2, size);
+
+#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
+binman_sym_declare(ulong, blob_ext_3, image_pos);
+binman_sym_declare(ulong, blob_ext_3, size);
+
+binman_sym_declare(ulong, blob_ext_4, image_pos);
+binman_sym_declare(ulong, blob_ext_4, size);
+#endif
+
 /* We need PHY iMEM PHY is 32KB padded */
 void ddr_load_train_firmware(enum fw_type type)
 {
 	u32 tmp32, i;
 	u32 error = 0;
-	unsigned long pr_to32, pr_from32;
-	unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0;
-	unsigned long imem_start = (unsigned long)&_end + fw_offset;
-	unsigned long dmem_start;
+	uint32_t pr_to32, pr_from32;
+	uint32_t fw_offset = type ? IMEM_2D_OFFSET : 0;
+	uint32_t imem_start = (uint32_t)&_end + fw_offset;
+	uint32_t dmem_start;
+	uint32_t imem_len = IMEM_LEN, dmem_len = DMEM_LEN;
 
 #ifdef CONFIG_SPL_OF_CONTROL
 	if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) {
@@ -43,11 +59,30 @@ void ddr_load_train_firmware(enum fw_type type)
 	}
 #endif
 
-	dmem_start = imem_start + IMEM_LEN;
+	if (CONFIG_IS_ENABLED(BINMAN_SYMBOLS)) {
+		switch (type) {
+		case FW_1D_IMAGE:
+			imem_start = binman_sym(ulong, blob_ext_1, image_pos);
+			imem_len = binman_sym(ulong, blob_ext_1, size);
+			dmem_start = binman_sym(ulong, blob_ext_2, image_pos);
+			dmem_len = binman_sym(ulong, blob_ext_2, size);
+			break;
+		case FW_2D_IMAGE:
+#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
+			imem_start = binman_sym(ulong, blob_ext_3, image_pos);
+			imem_len = binman_sym(ulong, blob_ext_3, size);
+			dmem_start = binman_sym(ulong, blob_ext_4, image_pos);
+			dmem_len = binman_sym(ulong, blob_ext_4, size);
+#endif
+			break;
+		}
+	}
+
+	dmem_start = imem_start + imem_len;
 
 	pr_from32 = imem_start;
 	pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
-	for (i = 0x0; i < IMEM_LEN; ) {
+	for (i = 0x0; i < imem_len; ) {
 		tmp32 = readl(pr_from32);
 		writew(tmp32 & 0x0000ffff, pr_to32);
 		pr_to32 += 4;
@@ -59,7 +94,7 @@ void ddr_load_train_firmware(enum fw_type type)
 
 	pr_from32 = dmem_start;
 	pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
-	for (i = 0x0; i < DMEM_LEN; ) {
+	for (i = 0x0; i < dmem_len; ) {
 		tmp32 = readl(pr_from32);
 		writew(tmp32 & 0x0000ffff, pr_to32);
 		pr_to32 += 4;
@@ -72,7 +107,7 @@ void ddr_load_train_firmware(enum fw_type type)
 	debug("check ddr_pmu_train_imem code\n");
 	pr_from32 = imem_start;
 	pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
-	for (i = 0x0; i < IMEM_LEN; ) {
+	for (i = 0x0; i < imem_len; ) {
 		tmp32 = (readw(pr_to32) & 0x0000ffff);
 		pr_to32 += 4;
 		tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
@@ -93,7 +128,7 @@ void ddr_load_train_firmware(enum fw_type type)
 	debug("check ddr4_pmu_train_dmem code\n");
 	pr_from32 = dmem_start;
 	pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR;
-	for (i = 0x0; i < DMEM_LEN;) {
+	for (i = 0x0; i < dmem_len;) {
 		tmp32 = (readw(pr_to32) & 0x0000ffff);
 		pr_to32 += 4;
 		tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16);
-- 
2.36.0



More information about the U-Boot mailing list