[PATCH v2 3/3] test: efi_bootmgr: add a test case for a short-form path

AKASHI Takahiro takahiro.akashi at linaro.org
Thu May 12 09:10:39 CEST 2022


On Thu, May 12, 2022 at 09:02:36AM +0200, Heinrich Schuchardt wrote:
> On 5/12/22 04:29, AKASHI Takahiro wrote:
> > A short-form path starting with a file device path will be tested in
> > a new test case.
> > 
> > This type of short-form path will be created with "efidebug boot add -b",
> > in particular, when a file system has no partition table.
> > 
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > ---
> >   test/py/tests/test_efi_bootmgr/conftest.py    | 25 +++++++++++++++++++
> >   .../test_efi_bootmgr/test_efi_bootmgr.py      | 25 +++++++++++++++++++
> >   2 files changed, 50 insertions(+)
> > 
> > diff --git a/test/py/tests/test_efi_bootmgr/conftest.py b/test/py/tests/test_efi_bootmgr/conftest.py
> > index a0a754afbe1b..5cd7252671fa 100644
> > --- a/test/py/tests/test_efi_bootmgr/conftest.py
> > +++ b/test/py/tests/test_efi_bootmgr/conftest.py
> > @@ -38,3 +38,28 @@ def efi_bootmgr_data(u_boot_config):
> >                  shell=True)
> > 
> >       return image_path
> > +
> > + at pytest.fixture(scope='session')
> > +def efi_bootmgr_data2(u_boot_config):
> > +    """Set up a file system without a partition table to be used
> > +       in UEFI bootmanager tests
> 
> Why do you want a file system without partition table? This is nothing
> the UEFI specification expects to support.

As we discussed several times in the past, a partition table in the file
system is not mandatory in U-Boot's UEFI subsystem.

> Your test should cover having
> a partition table and a device path which is file only.
> 
> Best regards
> 
> Heinrich
> 
> > +
> > +    Args:
> > +        u_boot_config -- U-boot configuration.
> > +
> > +    Return:
> > +        A path to disk image to be used for testing
> > +    """
> > +    mnt_point = u_boot_config.persistent_data_dir + '/test_efi_bootmgr'
> > +    image_path = u_boot_config.persistent_data_dir + '/efi_bootmgr_data2.img'
> > +
> > +    shutil.rmtree(mnt_point, ignore_errors=True)
> > +    os.mkdir(mnt_point, mode = 0o755)
> > +
> > +    shutil.copyfile(u_boot_config.build_dir + '/lib/efi_loader/helloworld.efi',
> > +                    mnt_point + '/helloworld.efi')
> > +
> > +    check_call(f'virt-make-fs --size=+1M --type=vfat {mnt_point} {image_path}',
> > +               shell=True)
> > +
> > +    return image_path
> > diff --git a/test/py/tests/test_efi_bootmgr/test_efi_bootmgr.py b/test/py/tests/test_efi_bootmgr/test_efi_bootmgr.py
> > index 75a6e7c96296..ab3d53a2dc95 100644
> > --- a/test/py/tests/test_efi_bootmgr/test_efi_bootmgr.py
> > +++ b/test/py/tests/test_efi_bootmgr/test_efi_bootmgr.py
> > @@ -41,3 +41,28 @@ def test_efi_bootmgr(u_boot_console, efi_bootmgr_data):
> > 
> >       u_boot_console.run_command(cmd = 'efidebug boot rm 0001')
> >       u_boot_console.run_command(cmd = 'efidebug boot rm 0002')
> > +
> > + at pytest.mark.boardspec('sandbox')
> > + at pytest.mark.buildconfigspec('cmd_efidebug')
> > + at pytest.mark.buildconfigspec('cmd_bootefi_bootmgr')
> > +def test_efi_bootmgr_short(u_boot_console, efi_bootmgr_data2):
> > +    """ Unit test for UEFI bootmanager with a short-form path
> > +    In this test case,
> > +    - File system has no partition table
> > +    - UEFI load option has a short-form path starting with a file device path
> > +
> > +    Args:
> > +        u_boot_console -- U-Boot console
> > +        efi_bootmgr_data2 -- Path to the disk image used for testing.
> > +    """
> > +    u_boot_console.run_command(cmd = f'host bind 0 {efi_bootmgr_data2}')
> > +
> > +    u_boot_console.run_command(cmd = 'efidebug boot add ' \
> > +        '-b 0001 TEST2 host 0:0 helloworld.efi')
> 
> This will not create a file only device path. So this does not test
> patch 1 and 2.

It does.
See the output from "efidebug boot dump" in the log.

> You could use setenv -e -i to create the boot option.
> 
> Best regards
> 
> Heinrich
> 
> > +    response = u_boot_console.run_command(cmd = 'efidebug boot dump')
> > +    assert 'file_path: /helloworld.efi' in response

Furthermore, here is the check for a device path only with a file.

-Takahiro Akashi

> > +    u_boot_console.run_command(cmd = 'efidebug boot next 0001')
> > +    response = u_boot_console.run_command(cmd = 'bootefi bootmgr')
> > +    assert 'Hello, world!' in response
> > +
> > +    u_boot_console.run_command(cmd = 'efidebug boot rm 0001')
> 


More information about the U-Boot mailing list