[PATCH v3 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC

William Zhang william.zhang at broadcom.com
Mon May 9 18:28:02 CEST 2022


This is the initial support for Broadcom's ARM-based 47622 SOC.

In this change, our first SOC is an armv7 platform called 47622. The
initial support includes a bare-bone implementation and dts with ARM
PL011 uart.

The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board
related code is in board/broadcom/bcmba.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.

Signed-off-by: William Zhang <william.zhang at broadcom.com>
Signed-off-by: Kursad Oney <kursad.oney at broadcom.com>
Signed-off-by: Anand Gore <anand.gore at broadcom.com>

---

Changes in v3:
- Remove the CONFIG_SYS_BAUDRATE_TABLE to use the u-boot default table

Changes in v2:
- Updated dts and dtsi files which are accpeted in linux-next upstream
- Changed CONFIG_SYS_TEXT_BASE to 0x01000000 from 0x10000000 to work
on boards with 256MB or less memory

 MAINTAINERS                            |  11 +++
 arch/arm/Kconfig                       |   7 ++
 arch/arm/Makefile                      |   1 +
 arch/arm/dts/Makefile                  |   3 +
 arch/arm/dts/bcm47622.dtsi             | 126 +++++++++++++++++++++++++
 arch/arm/dts/bcm947622.dts             |  30 ++++++
 arch/arm/mach-bcmbca/Kconfig           |  17 ++++
 arch/arm/mach-bcmbca/Makefile          |   6 ++
 arch/arm/mach-bcmbca/bcm47622/Kconfig  |  17 ++++
 arch/arm/mach-bcmbca/bcm47622/Makefile |   5 +
 board/broadcom/bcmbca/Kconfig          |  17 ++++
 board/broadcom/bcmbca/Makefile         |   5 +
 board/broadcom/bcmbca/board.c          |  35 +++++++
 configs/bcm947622_defconfig            |  18 ++++
 include/configs/bcm947622.h            |  18 ++++
 15 files changed, 316 insertions(+)
 create mode 100644 arch/arm/dts/bcm47622.dtsi
 create mode 100644 arch/arm/dts/bcm947622.dts
 create mode 100644 arch/arm/mach-bcmbca/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/Makefile
 create mode 100644 arch/arm/mach-bcmbca/bcm47622/Kconfig
 create mode 100644 arch/arm/mach-bcmbca/bcm47622/Makefile
 create mode 100644 board/broadcom/bcmbca/Kconfig
 create mode 100644 board/broadcom/bcmbca/Makefile
 create mode 100644 board/broadcom/bcmbca/board.c
 create mode 100644 configs/bcm947622_defconfig
 create mode 100644 include/configs/bcm947622.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 56be0bfad00c..96cd85dd1c7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -195,6 +195,17 @@ F:	drivers/pinctrl/broadcom/
 F:	configs/rpi_*
 T:	git https://source.denx.de/u-boot/custodians/u-boot-arm.git
 
+ARM BROADCOM BCMBCA
+M:	Anand Gore <anand.gore at broadcom.com>
+M:	William Zhang <william.zhang at broadcom.com>
+M:	Kursad Oney <kursad.oney at broadcom.com>
+M:	Joel Peshkin <joel.peshkin at broadcom.com>
+S:	Maintained
+F:	arch/arm/mach-bcmbca/
+F:	board/broadcom/bcmbca/
+F:	configs/bcm947622_defconfig
+F:	include/configs/bcm947622.h
+
 ARM BROADCOM BCMSTB
 M:	Thomas Fitzsimmons <fitzsim at fitzsim.org>
 S:	Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 57946f61fabe..5e231fc72854 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -712,6 +712,11 @@ config ARCH_BCMSTB
 	  This enables support for Broadcom ARM-based set-top box
 	  chipsets, including the 7445 family of chips.
 
+config ARCH_BCMBCA
+	bool "Broadcom broadband chip family"
+	select DM
+	select OF_CONTROL
+
 config TARGET_VEXPRESS_CA9X4
 	bool "Support vexpress_ca9x4"
 	select CPU_V7A
@@ -2175,6 +2180,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm283x/Kconfig"
 
+source "arch/arm/mach-bcmbca/Kconfig"
+
 source "arch/arm/mach-bcmstb/Kconfig"
 
 source "arch/arm/mach-davinci/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ad757e982e37..0fd127e0e7e4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -59,6 +59,7 @@ machine-$(CONFIG_ARCH_APPLE)		+= apple
 machine-$(CONFIG_ARCH_ASPEED)		+= aspeed
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_BCM283X)		+= bcm283x
+machine-$(CONFIG_ARCH_BCMBCA)		+= bcmbca
 machine-$(CONFIG_ARCH_BCMSTB)		+= bcmstb
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ab2d0da192c6..db42475bba1c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1132,6 +1132,9 @@ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
 
 dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
 
+dtb-$(CONFIG_BCM47622) += \
+	bcm947622.dtb
+
 dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
 dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
 
diff --git a/arch/arm/dts/bcm47622.dtsi b/arch/arm/dts/bcm47622.dtsi
new file mode 100644
index 000000000000..c016e12b7372
--- /dev/null
+++ b/arch/arm/dts/bcm47622.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		CA7_2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		CA7_3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+		cpu_off = <1>;
+		cpu_on = <2>;
+	};
+
+	axi at 81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x818000>;
+
+		gic: interrupt-controller at 1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>;
+		};
+	};
+
+	bus at ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial at 12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/bcm947622.dts b/arch/arm/dts/bcm947622.dts
new file mode 100644
index 000000000000..6f083724ab8e
--- /dev/null
+++ b/arch/arm/dts/bcm947622.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
new file mode 100644
index 000000000000..2d49380f879b
--- /dev/null
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if ARCH_BCMBCA
+
+config BCM47622
+	bool "Support for Broadcom 47622 Family"
+	select SYS_ARCH_TIMER
+	select CPU_V7A
+	select DM_SERIAL
+	select PL01X_SERIAL
+
+endif
+
+source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
new file mode 100644
index 000000000000..072d4ea7b5e6
--- /dev/null
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+obj-$(CONFIG_BCM47622) += bcm47622/
diff --git a/arch/arm/mach-bcmbca/bcm47622/Kconfig b/arch/arm/mach-bcmbca/bcm47622/Kconfig
new file mode 100644
index 000000000000..bce30892e35d
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm47622/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM47622
+
+config TARGET_BCM947622
+	bool "Broadcom 47622 Reference Board"
+	depends on ARCH_BCMBCA
+
+config SYS_SOC
+	default "bcm47622"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm47622/Makefile b/arch/arm/mach-bcmbca/bcm47622/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm47622/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
new file mode 100644
index 000000000000..63d4252da620
--- /dev/null
+++ b/board/broadcom/bcmbca/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+config SYS_BOARD
+	default "bcmbca"
+
+config SYS_VENDOR
+	default "broadcom"
+
+if TARGET_BCM947622
+
+config SYS_CONFIG_NAME
+	default "bcm947622"
+
+endif
diff --git a/board/broadcom/bcmbca/Makefile b/board/broadcom/bcmbca/Makefile
new file mode 100644
index 000000000000..8f06c3111b9b
--- /dev/null
+++ b/board/broadcom/bcmbca/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+
+obj-y	+= board.o
diff --git a/board/broadcom/bcmbca/board.c b/board/broadcom/bcmbca/board.c
new file mode 100644
index 000000000000..4aa1d659d5c7
--- /dev/null
+++ b/board/broadcom/bcmbca/board.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	if (fdtdec_setup_mem_size_base() != 0)
+		puts("fdtdec_setup_mem_size_base() has failed\n");
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	fdtdec_setup_memory_banksize();
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
diff --git a/configs/bcm947622_defconfig b/configs/bcm947622_defconfig
new file mode 100644
index 000000000000..2cb17fb0ac2c
--- /dev/null
+++ b/configs/bcm947622_defconfig
@@ -0,0 +1,18 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM47622=y
+CONFIG_TARGET_BCM947622=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm947622"
+CONFIG_IDENT_STRING=" Broadcom BCM47622"
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm947622.h b/include/configs/bcm947622.h
new file mode 100644
index 000000000000..baa005aed215
--- /dev/null
+++ b/include/configs/bcm947622.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM947622_H
+#define __BCM947622_H
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BOOTM_LEN		(32 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + SZ_16M)
+
+#define COUNTER_FREQUENCY		50000000
+#endif
-- 
2.17.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220509/1b20c869/attachment.bin>


More information about the U-Boot mailing list