[PATCH v3 1/1] arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
Philippe REYNES
philippe.reynes at softathome.com
Wed May 11 15:52:27 CEST 2022
Hi William,
Le 09/05/2022 à 18:28, William Zhang a écrit :
> This is the initial support for Broadcom's ARM-based 47622 SOC.
>
> In this change, our first SOC is an armv7 platform called 47622. The
> initial support includes a bare-bone implementation and dts with ARM
> PL011 uart.
>
> The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board
> related code is in board/broadcom/bcmba.
>
> The u-boot image can be loaded from flash or network to the entry
> point address in the memory and boot from there.
>
> Signed-off-by: William Zhang <william.zhang at broadcom.com>
> Signed-off-by: Kursad Oney <kursad.oney at broadcom.com>
> Signed-off-by: Anand Gore <anand.gore at broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes at softathome.com>
>
> ---
>
> Changes in v3:
> - Remove the CONFIG_SYS_BAUDRATE_TABLE to use the u-boot default table
>
> Changes in v2:
> - Updated dts and dtsi files which are accpeted in linux-next upstream
> - Changed CONFIG_SYS_TEXT_BASE to 0x01000000 from 0x10000000 to work
> on boards with 256MB or less memory
>
> MAINTAINERS | 11 +++
> arch/arm/Kconfig | 7 ++
> arch/arm/Makefile | 1 +
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/bcm47622.dtsi | 126 +++++++++++++++++++++++++
> arch/arm/dts/bcm947622.dts | 30 ++++++
> arch/arm/mach-bcmbca/Kconfig | 17 ++++
> arch/arm/mach-bcmbca/Makefile | 6 ++
> arch/arm/mach-bcmbca/bcm47622/Kconfig | 17 ++++
> arch/arm/mach-bcmbca/bcm47622/Makefile | 5 +
> board/broadcom/bcmbca/Kconfig | 17 ++++
> board/broadcom/bcmbca/Makefile | 5 +
> board/broadcom/bcmbca/board.c | 35 +++++++
> configs/bcm947622_defconfig | 18 ++++
> include/configs/bcm947622.h | 18 ++++
> 15 files changed, 316 insertions(+)
> create mode 100644 arch/arm/dts/bcm47622.dtsi
> create mode 100644 arch/arm/dts/bcm947622.dts
> create mode 100644 arch/arm/mach-bcmbca/Kconfig
> create mode 100644 arch/arm/mach-bcmbca/Makefile
> create mode 100644 arch/arm/mach-bcmbca/bcm47622/Kconfig
> create mode 100644 arch/arm/mach-bcmbca/bcm47622/Makefile
> create mode 100644 board/broadcom/bcmbca/Kconfig
> create mode 100644 board/broadcom/bcmbca/Makefile
> create mode 100644 board/broadcom/bcmbca/board.c
> create mode 100644 configs/bcm947622_defconfig
> create mode 100644 include/configs/bcm947622.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 56be0bfad00c..96cd85dd1c7a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -195,6 +195,17 @@ F: drivers/pinctrl/broadcom/
> F: configs/rpi_*
> T: git https://source.denx.de/u-boot/custodians/u-boot-arm.git
>
> +ARM BROADCOM BCMBCA
> +M: Anand Gore <anand.gore at broadcom.com>
> +M: William Zhang <william.zhang at broadcom.com>
> +M: Kursad Oney <kursad.oney at broadcom.com>
> +M: Joel Peshkin <joel.peshkin at broadcom.com>
> +S: Maintained
> +F: arch/arm/mach-bcmbca/
> +F: board/broadcom/bcmbca/
> +F: configs/bcm947622_defconfig
> +F: include/configs/bcm947622.h
> +
> ARM BROADCOM BCMSTB
> M: Thomas Fitzsimmons <fitzsim at fitzsim.org>
> S: Maintained
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 57946f61fabe..5e231fc72854 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -712,6 +712,11 @@ config ARCH_BCMSTB
> This enables support for Broadcom ARM-based set-top box
> chipsets, including the 7445 family of chips.
>
> +config ARCH_BCMBCA
> + bool "Broadcom broadband chip family"
> + select DM
> + select OF_CONTROL
> +
> config TARGET_VEXPRESS_CA9X4
> bool "Support vexpress_ca9x4"
> select CPU_V7A
> @@ -2175,6 +2180,8 @@ source "arch/arm/mach-at91/Kconfig"
>
> source "arch/arm/mach-bcm283x/Kconfig"
>
> +source "arch/arm/mach-bcmbca/Kconfig"
> +
> source "arch/arm/mach-bcmstb/Kconfig"
>
> source "arch/arm/mach-davinci/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index ad757e982e37..0fd127e0e7e4 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -59,6 +59,7 @@ machine-$(CONFIG_ARCH_APPLE) += apple
> machine-$(CONFIG_ARCH_ASPEED) += aspeed
> machine-$(CONFIG_ARCH_AT91) += at91
> machine-$(CONFIG_ARCH_BCM283X) += bcm283x
> +machine-$(CONFIG_ARCH_BCMBCA) += bcmbca
> machine-$(CONFIG_ARCH_BCMSTB) += bcmstb
> machine-$(CONFIG_ARCH_DAVINCI) += davinci
> machine-$(CONFIG_ARCH_EXYNOS) += exynos
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ab2d0da192c6..db42475bba1c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1132,6 +1132,9 @@ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
>
> dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
>
> +dtb-$(CONFIG_BCM47622) += \
> + bcm947622.dtb
> +
> dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
> dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
>
> diff --git a/arch/arm/dts/bcm47622.dtsi b/arch/arm/dts/bcm47622.dtsi
> new file mode 100644
> index 000000000000..c016e12b7372
> --- /dev/null
> +++ b/arch/arm/dts/bcm47622.dtsi
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Broadcom Ltd.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + compatible = "brcm,bcm47622", "brcm,bcmbca";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CA7_0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> +
> + CA7_1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> + CA7_2: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x2>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> + CA7_3: cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x3>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> + L2_0: l2-cache0 {
> + compatible = "cache";
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + arm,cpu-registers-not-fw-configured;
> + };
> +
> + pmu: pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&CA7_0>, <&CA7_1>,
> + <&CA7_2>, <&CA7_3>;
> + };
> +
> + clocks: clocks {
> + periph_clk: periph-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <200000000>;
> + };
> + uart_clk: uart-clk {
> + compatible = "fixed-factor-clock";
> + #clock-cells = <0>;
> + clocks = <&periph_clk>;
> + clock-div = <4>;
> + clock-mult = <1>;
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + cpu_off = <1>;
> + cpu_on = <2>;
> + };
> +
> + axi at 81000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x81000000 0x818000>;
> +
> + gic: interrupt-controller at 1000 {
> + compatible = "arm,cortex-a7-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x1000 0x1000>,
> + <0x2000 0x2000>;
> + };
> + };
> +
> + bus at ff800000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0xff800000 0x800000>;
> +
> + uart0: serial at 12000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12000 0x1000>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>, <&uart_clk>;
> + clock-names = "uartclk", "apb_pclk";
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/arch/arm/dts/bcm947622.dts b/arch/arm/dts/bcm947622.dts
> new file mode 100644
> index 000000000000..6f083724ab8e
> --- /dev/null
> +++ b/arch/arm/dts/bcm947622.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019 Broadcom Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm47622.dtsi"
> +
> +/ {
> + model = "Broadcom BCM947622 Reference Board";
> + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x08000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
> new file mode 100644
> index 000000000000..2d49380f879b
> --- /dev/null
> +++ b/arch/arm/mach-bcmbca/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# (C) Copyright 2022 Broadcom Ltd
> +#
> +
> +if ARCH_BCMBCA
> +
> +config BCM47622
> + bool "Support for Broadcom 47622 Family"
> + select SYS_ARCH_TIMER
> + select CPU_V7A
> + select DM_SERIAL
> + select PL01X_SERIAL
> +
> +endif
> +
> +source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
> diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
> new file mode 100644
> index 000000000000..072d4ea7b5e6
> --- /dev/null
> +++ b/arch/arm/mach-bcmbca/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# (C) Copyright 2022 Broadcom Ltd
> +#
> +
> +obj-$(CONFIG_BCM47622) += bcm47622/
> diff --git a/arch/arm/mach-bcmbca/bcm47622/Kconfig b/arch/arm/mach-bcmbca/bcm47622/Kconfig
> new file mode 100644
> index 000000000000..bce30892e35d
> --- /dev/null
> +++ b/arch/arm/mach-bcmbca/bcm47622/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# (C) Copyright 2022 Broadcom Ltd
> +#
> +
> +if BCM47622
> +
> +config TARGET_BCM947622
> + bool "Broadcom 47622 Reference Board"
> + depends on ARCH_BCMBCA
> +
> +config SYS_SOC
> + default "bcm47622"
> +
> +source "board/broadcom/bcmbca/Kconfig"
> +
> +endif
> diff --git a/arch/arm/mach-bcmbca/bcm47622/Makefile b/arch/arm/mach-bcmbca/bcm47622/Makefile
> new file mode 100644
> index 000000000000..beb979af7520
> --- /dev/null
> +++ b/arch/arm/mach-bcmbca/bcm47622/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# (C) Copyright 2022 Broadcom Ltd
> +#
> +obj- += dummy.o
> diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
> new file mode 100644
> index 000000000000..63d4252da620
> --- /dev/null
> +++ b/board/broadcom/bcmbca/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# (C) Copyright 2022 Broadcom Ltd
> +#
> +
> +config SYS_BOARD
> + default "bcmbca"
> +
> +config SYS_VENDOR
> + default "broadcom"
> +
> +if TARGET_BCM947622
> +
> +config SYS_CONFIG_NAME
> + default "bcm947622"
> +
> +endif
> diff --git a/board/broadcom/bcmbca/Makefile b/board/broadcom/bcmbca/Makefile
> new file mode 100644
> index 000000000000..8f06c3111b9b
> --- /dev/null
> +++ b/board/broadcom/bcmbca/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# (C) Copyright 2022 Broadcom Ltd
> +
> +obj-y += board.o
> diff --git a/board/broadcom/bcmbca/board.c b/board/broadcom/bcmbca/board.c
> new file mode 100644
> index 000000000000..4aa1d659d5c7
> --- /dev/null
> +++ b/board/broadcom/bcmbca/board.c
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2022 Broadcom Ltd.
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + if (fdtdec_setup_mem_size_base() != 0)
> + puts("fdtdec_setup_mem_size_base() has failed\n");
> +
> + return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> + fdtdec_setup_memory_banksize();
> + return 0;
> +}
> +
> +int print_cpuinfo(void)
> +{
> + return 0;
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> +}
> diff --git a/configs/bcm947622_defconfig b/configs/bcm947622_defconfig
> new file mode 100644
> index 000000000000..2cb17fb0ac2c
> --- /dev/null
> +++ b/configs/bcm947622_defconfig
> @@ -0,0 +1,18 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_BCMBCA=y
> +CONFIG_SYS_TEXT_BASE=0x01000000
> +CONFIG_SYS_MALLOC_LEN=0x2000000
> +CONFIG_SYS_MALLOC_F_LEN=0x8000
> +CONFIG_BCM47622=y
> +CONFIG_TARGET_BCM947622=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_DEVICE_TREE="bcm947622"
> +CONFIG_IDENT_STRING=" Broadcom BCM47622"
> +CONFIG_ENV_VARS_UBOOT_CONFIG=y
> +CONFIG_SYS_LOAD_ADDR=0x01000000
> +CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_OF_EMBED=y
> +CONFIG_CLK=y
> diff --git a/include/configs/bcm947622.h b/include/configs/bcm947622.h
> new file mode 100644
> index 000000000000..baa005aed215
> --- /dev/null
> +++ b/include/configs/bcm947622.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2022 Broadcom Ltd.
> + */
> +
> +#ifndef __BCM947622_H
> +#define __BCM947622_H
> +#include <linux/sizes.h>
> +
> +#define CONFIG_SYS_MAXARGS 64
> +#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024)
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x00000000
> +
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
> +
> +#define COUNTER_FREQUENCY 50000000
> +#endif
More information about the U-Boot
mailing list