[PATCH v5 07/25] doc: mediatek: add documentation for mt7621 reference boards

[Weijie Gao]

The MT7621 requires external binary blob being executed during u-boot's
boot-up flow. It's necessary to provide a guide here for users to correctly
build the u-boot.

Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
v5 changes: none
v4 changes: new
---
 doc/board/mediatek/mt7621.rst | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 doc/board/mediatek/mt7621.rst

diff --git a/doc/board/mediatek/mt7621.rst b/doc/board/mediatek/mt7621.rst
new file mode 100644
index 0000000000..4f400a4ca4
--- /dev/null
+++ b/doc/board/mediatek/mt7621.rst
@@ -0,0 +1,48 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+mt7621_rfb/mt7621_nand_rfb
+==========================
+
+U-Boot for the MediaTek MT7621 boards
+
+Quick Start
+-----------
+
+- Get the DDR initialization binary blob
+- Configure CPU and DDR parameters
+- Build U-Boot
+
+Get the DDR initialization binary blob
+--------------------
+
+Download one from:
+ - https://raw.githubusercontent.com/mtk-openwrt/mt7621-lowlevel-preloader/master/mt7621_stage_sram.bin
+ - https://raw.githubusercontent.com/mtk-openwrt/mt7621-lowlevel-preloader/master/mt7621_stage_sram_noprint.bin
+
+mt7621_stage_sram_noprint.bin has removed all output logs. To use this one,
+download and rename it to mt7621_stage_sram.bin
+
+Put the binary blob to the u-boot build directory.
+
+Configure CPU and DDR parameters
+--------------------------------
+
+menuconfig > MIPS architecture > MediaTek MIPS platforms > CPU & DDR configuration
+
+Select the correct DDR timing parameters for your board. The size shown here
+must match the DDR size of you board.
+
+The frequency of CPU and DDR can also be adjusted.
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=mipsel-linux-
+   $ make O=build mt7621_rfb_defconfig # or mt7621_nand_rfb_defconfig
+   $ cp mt7621_stage_sram.bin ./build/mt7621_stage_sram.bin
+   $ # or cp mt7621_stage_sram_noprint.bin ./build/mt7621_stage_sram.bin
+   $ make O=build
+
+Burn the u-boot-mt7621.bin to the SPI-NOR or NAND flash.
-- 
2.17.1