[PATCH 04/12] ARM: dts: sun7i: Sync from Linux v5.18-rc1
Andre Przywara
andre.przywara at arm.com
Fri May 6 02:39:40 CEST 2022
On Wed, 27 Apr 2022 15:31:23 -0500
Samuel Holland <samuel at sholland.org> wrote:
> Copy the devicetree source for the A20 SoC and all existing boards
> verbatim from the Linux v5.18-rc1 tag.
>
> This commit also adds the following new board devicetrees:
> - sun7i-a20-haoyu-marsboard.dts
> - sun7i-a20-linutronix-testbox-v2.dts
> - sun7i-a20-olinuxino-lime-emmc.dts
>
> This update includes changes to the USB PHY detection GPIO properties
> which are needed to convert that driver to use the DM GPIO framework.
This looks alright: compared the files to the Linux tree, also skimmed
over the changes, they look harmless. Boot tested on BananaPi M1:
Ethernet and USB work.
There is one thing, though:
the move of the PHY child node into an MDIO subnode also affects the
U-Boot-only sun7i-a20-m5.dts. As this DT gets build with every A20
build, there is now a dtc warning with every A20 board:
===============
arch/arm/dts/sun7i-a20-m5.dtb: Warning (reg_format):
/soc/ethernet at 1c50000/ethernet-phy at 1:reg: property has invalid length
(4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/dts/sun7i-a20-m5.dtb: Warning (avoid_default_addr_size):
/soc/ethernet at 1c50000/ethernet-phy at 1: Relying on default #address-cells
value arch/arm/dts/sun7i-a20-m5.dtb: Warning (avoid_default_addr_size):
/soc/ethernet at 1c50000/ethernet-phy at 1: Relying on default #size-cells
value ===============
Below simple patch fixes that and lets buildman pass (on the whole
series):
===============
diff --git a/arch/arm/dts/sun7i-a20-m5.dts
b/arch/arm/dts/sun7i-a20-m5.dts index 6de52c7c314..cfbc50d9e55 100644
--- a/arch/arm/dts/sun7i-a20-m5.dts
+++ b/arch/arm/dts/sun7i-a20-m5.dts
@@ -39,7 +39,9 @@
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
+};
+&gmac_mdio {
phy1: ethernet-phy at 1 {
reg = <1>;
};
===============
In case there is nothing else, I will just apply this when merging.
With that fixed:
> Signed-off-by: Samuel Holland <samuel at sholland.org>
Reviewed-by: Andre Przywara <andre.przywara at arm.com>
Cheers,
Andre
> ---
>
> arch/arm/dts/Makefile | 3 +
> arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 16 +-
> arch/arm/dts/sun7i-a20-bananapi.dts | 41 ++-
> arch/arm/dts/sun7i-a20-bananapro.dts | 16 +-
> arch/arm/dts/sun7i-a20-cubieboard2.dts | 28 +-
> arch/arm/dts/sun7i-a20-cubietruck.dts | 20 +-
> arch/arm/dts/sun7i-a20-haoyu-marsboard.dts | 182 +++++++++++++
> arch/arm/dts/sun7i-a20-hummingbird.dts | 21 +-
> arch/arm/dts/sun7i-a20-i12-tvbox.dts | 16 +-
> arch/arm/dts/sun7i-a20-icnova-swac.dts | 15 +-
> arch/arm/dts/sun7i-a20-itead-ibox.dts | 8 +-
> arch/arm/dts/sun7i-a20-lamobo-r1.dts | 16 +-
> .../dts/sun7i-a20-linutronix-testbox-v2.dts | 47 ++++
> arch/arm/dts/sun7i-a20-m3.dts | 14 +-
> arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 14 +-
> arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 30 ++-
> .../arm/dts/sun7i-a20-olinuxino-lime-emmc.dts | 32 +++
> arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 32 +--
> arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 46 ++--
> arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 32 +--
> arch/arm/dts/sun7i-a20-orangepi-mini.dts | 28 +-
> arch/arm/dts/sun7i-a20-orangepi.dts | 26 +-
> arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 32 +--
> arch/arm/dts/sun7i-a20-pcduino3.dts | 28 +-
> arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 13 +-
> arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 24 +-
> arch/arm/dts/sun7i-a20.dtsi | 254 ++++++++++++++++--
> 27 files changed, 707 insertions(+), 327 deletions(-)
> create mode 100644 arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
> create mode 100644 arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
> create mode 100644 arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 48ede8888e..7120d6a3aa 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -583,11 +583,13 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-bananapro.dtb \
> sun7i-a20-cubieboard2.dtb \
> sun7i-a20-cubietruck.dtb \
> + sun7i-a20-haoyu-marsboard.dtb \
> sun7i-a20-hummingbird.dtb \
> sun7i-a20-i12-tvbox.dtb \
> sun7i-a20-icnova-swac.dtb \
> sun7i-a20-itead-ibox.dtb \
> sun7i-a20-lamobo-r1.dtb \
> + sun7i-a20-linutronix-testbox-v2.dtb \
> sun7i-a20-m3.dtb \
> sun7i-a20-m5.dtb \
> sun7i-a20-mk808c.dtb \
> @@ -595,6 +597,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-olimex-som204-evb.dtb \
> sun7i-a20-olimex-som204-evb-emmc.dtb \
> sun7i-a20-olinuxino-lime.dtb \
> + sun7i-a20-olinuxino-lime-emmc.dtb \
> sun7i-a20-olinuxino-lime2.dtb \
> sun7i-a20-olinuxino-lime2-emmc.dtb \
> sun7i-a20-olinuxino-micro.dtb \
> diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
> index 4dbcad1343..caa935ca4f 100644
> --- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
> +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
> @@ -74,12 +74,12 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led-0 {
> label = "bananapi-m1-plus:green:usr";
> gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
> };
>
> - pwr {
> + led-1 {
> label = "bananapi-m1-plus:pwr:usr";
> gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -129,14 +129,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii-id";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -171,6 +167,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
> index 33040c43bc..46ecf9db23 100644
> --- a/arch/arm/dts/sun7i-a20-bananapi.dts
> +++ b/arch/arm/dts/sun7i-a20-bananapi.dts
> @@ -77,7 +77,7 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led {
> label = "bananapi:green:usr";
> gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
> };
> @@ -104,16 +104,15 @@
>
> &cpu0 {
> cpu-supply = <®_dcdc2>;
> - operating-points = <
> + operating-points =
> /* kHz uV */
> - 960000 1400000
> - 912000 1400000
> - 864000 1350000
> - 720000 1250000
> - 528000 1150000
> - 312000 1100000
> - 144000 1050000
> - >;
> + <960000 1400000>,
> + <912000 1400000>,
> + <864000 1350000>,
> + <720000 1250000>,
> + <528000 1150000>,
> + <312000 1100000>,
> + <144000 1050000>;
> };
>
> &de {
> @@ -131,14 +130,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii-id";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -171,6 +166,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -246,12 +247,6 @@
> "SPI-MISO", "SPI-CE1", "",
> "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
> "", "", "", "", "", "", "", "";
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> };
>
> #include "axp209.dtsi"
> @@ -329,9 +324,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
> index 8a75545e22..e22f0e8bb1 100644
> --- a/arch/arm/dts/sun7i-a20-bananapro.dts
> +++ b/arch/arm/dts/sun7i-a20-bananapro.dts
> @@ -63,12 +63,12 @@
> leds {
> compatible = "gpio-leds";
>
> - blue {
> + led-0 {
> label = "bananapro:blue:usr";
> gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
> };
>
> - green {
> + led-1 {
> label = "bananapro:green:usr";
> gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
> };
> @@ -109,14 +109,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii-id";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -143,6 +139,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
> index 200685b0b1..e35e6990c4 100644
> --- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
> +++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
> @@ -75,12 +75,12 @@
> leds {
> compatible = "gpio-leds";
>
> - blue {
> + led-0 {
> label = "cubieboard2:blue:usr";
> gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
> };
>
> - green {
> + led-1 {
> label = "cubieboard2:green:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
> };
> @@ -115,13 +115,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -161,6 +157,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &ohci0 {
> status = "okay";
> };
> @@ -173,14 +175,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_ahci_5v {
> status = "okay";
> };
> @@ -236,9 +230,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
> index 46a9f4669e..52160e3683 100644
> --- a/arch/arm/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
> @@ -75,22 +75,22 @@
> leds {
> compatible = "gpio-leds";
>
> - blue {
> + led-0 {
> label = "cubietruck:blue:usr";
> gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
> };
>
> - orange {
> + led-1 {
> label = "cubietruck:orange:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
> };
>
> - white {
> + led-2 {
> label = "cubietruck:white:usr";
> gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
> };
>
> - green {
> + led-3 {
> label = "cubietruck:green:usr";
> gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
> };
> @@ -150,13 +150,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii-id";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -194,6 +190,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
> new file mode 100644
> index 0000000000..097e479c27
> --- /dev/null
> +++ b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
> @@ -0,0 +1,182 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2021 Conley Lee
> + * Conley Lee <conleylee at foxmail.com>
> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "HAOYU Electronics Marsboard A20";
> + compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +};
> +
> +&ahci {
> + target-supply = <®_ahci_5v>;
> + status = "okay";
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <®_dcdc2>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&gmac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
> + phy-handle = <&phy0>;
> + phy-mode = "mii";
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + axp209: pmic at 34 {
> + reg = <0x34>;
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
> + status = "okay";
> +};
> +
> +&gmac_mdio {
> + phy0: ethernet-phy at 0 {
> + reg = <0>;
> + };
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&pio {
> + gmac_txerr: gmac-txerr-pin {
> + pins = "PA17";
> + function = "gmac";
> + };
> +};
> +
> +®_ahci_5v {
> + status = "okay";
> +};
> +
> +#include "axp209.dtsi"
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +®_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1450000>;
> + regulator-name = "vdd-cpu";
> +};
> +
> +®_dcdc3 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-int-dll";
> +};
> +
> +®_ldo1 {
> + regulator-name = "vdd-rtc";
> +};
> +
> +®_ldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "avcc";
> +};
> +
> +®_usb1_vbus {
> + status = "okay";
> +};
> +
> +®_usb2_vbus {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pb_pins>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb1_vbus-supply = <®_usb1_vbus>;
> + usb2_vbus-supply = <®_usb2_vbus>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
> index fd0153f656..3def2a3305 100644
> --- a/arch/arm/dts/sun7i-a20-hummingbird.dts
> +++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
> @@ -100,19 +100,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii";
> phy-supply = <®_gmac_vdd>;
> - /* phy reset config */
> - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
> - snps,reset-active-low;
> - /* wait 1s after reset, otherwise fail to read phy id */
> - snps,reset-delays-us = <0 10000 1000000>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -146,6 +137,16 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
> + reset-assert-us = <10000>;
> + /* wait 1s after reset, otherwise fail to read phy id */
> + reset-deassert-us = <1000000>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v0>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
> index 5f1c4f573d..b21ddd0ec1 100644
> --- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
> +++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
> @@ -62,12 +62,12 @@
> leds {
> compatible = "gpio-leds";
>
> - red {
> + led-0 {
> label = "i12_tvbox:red:usr";
> gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
> };
>
> - blue {
> + led-1 {
> label = "i12_tvbox:blue:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
> };
> @@ -115,14 +115,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -145,6 +141,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
> index 949494730a..413505f45a 100644
> --- a/arch/arm/dts/sun7i-a20-icnova-swac.dts
> +++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
> @@ -49,7 +49,8 @@
>
> / {
> model = "ICnova-A20 SWAC";
> - compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
> + compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
> + "allwinner,sun7i-a20";
>
> aliases {
> serial0 = &uart0;
> @@ -75,13 +76,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -98,6 +95,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
> index b90a7607d0..8ff83016ff 100644
> --- a/arch/arm/dts/sun7i-a20-itead-ibox.dts
> +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
> @@ -53,13 +53,13 @@
> pinctrl-names = "default";
> pinctrl-0 = <&led_pins_itead_core>;
>
> - green {
> + led-0 {
> label = "itead_core:green:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - blue {
> + led-1 {
> label = "itead_core:blue:usr";
> gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -97,10 +97,12 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> +};
>
> +&gmac_mdio {
> phy1: ethernet-phy at 1 {
> reg = <1>;
> };
> diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
> index f91e1bee44..97518afe46 100644
> --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
> +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
> @@ -75,7 +75,7 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led {
> label = "lamobo_r1:green:usr";
> gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
> };
> @@ -123,8 +123,6 @@
> phy-mode = "rgmii";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> - /delete-property/#address-cells;
> - /delete-property/#size-cells;
>
> fixed-link {
> speed = <1000>;
> @@ -229,14 +227,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> #include "axp209.dtsi"
>
> &ac_power_supply {
> @@ -322,9 +312,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
> new file mode 100644
> index 0000000000..da5a2eea4c
> --- /dev/null
> +++ b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2020 Linutronix GmbH
> + * Author: Benedikt Spranger <b.spranger at linutronix.de>
> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20-lamobo-r1.dts"
> +
> +/ {
> + model = "Lamobo R1";
> + compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
> +
> + leds {
> + led-opto1 {
> + label = "lamobo_r1:opto:powerswitch";
> + gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + led-opto2 {
> + label = "lamobo_r1:opto:relay";
> + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + status = "okay";
> +
> + eeprom: eeprom at 50 {
> + compatible = "atmel,24c08";
> + reg = <0x50>;
> + status = "okay";
> + };
> +
> + atecc508a at 60 {
> + compatible = "atmel,atecc508a";
> + reg = <0x60>;
> + };
> +};
> +
> +&can0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&can_ph_pins>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts
> index b8a1aaaf39..f161d52388 100644
> --- a/arch/arm/dts/sun7i-a20-m3.dts
> +++ b/arch/arm/dts/sun7i-a20-m3.dts
> @@ -64,7 +64,7 @@
> leds {
> compatible = "gpio-leds";
>
> - blue {
> + led {
> label = "m3:blue:usr";
> gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
> };
> @@ -82,13 +82,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -111,6 +107,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
> index f0e6a96e57..f05ee32bc9 100644
> --- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
> +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
> @@ -75,7 +75,7 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led {
> label = "a20-olimex-som-evb:green:usr";
> gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -111,13 +111,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -202,6 +198,12 @@
> };
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
> index 823aabce04..54af6c1807 100644
> --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
> +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
> @@ -46,19 +46,19 @@
> leds {
> compatible = "gpio-leds";
>
> - stat {
> + led-0 {
> label = "a20-som204-evb:green:stat";
> gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - led1 {
> + led-1 {
> label = "a20-som204-evb:green:led1";
> gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
>
> - led2 {
> + led-2 {
> label = "a20-som204-evb:yellow:led2";
> gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -105,18 +105,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy3>;
> + phy-handle = <&phy3>;
> phy-mode = "rgmii";
> phy-supply = <®_vcc3v3>;
> -
> - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
> - snps,reset-active-low;
> - snps,reset-delays-us = <0 10000 1000000>;
> status = "okay";
> -
> - phy3: ethernet-phy at 3 {
> - reg = <3>;
> - };
> };
>
> &hdmi {
> @@ -161,6 +153,16 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy3: ethernet-phy at 3 {
> + reg = <3>;
> + reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
> + reset-assert-us = <10000>;
> + /* wait 1s after reset, otherwise fail to read phy id */
> + reset-deassert-us = <1000000>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -314,8 +316,8 @@
> };
>
> &usbphy {
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
> new file mode 100644
> index 0000000000..033cab3443
> --- /dev/null
> +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Olimex Ltd.
> + * Author: Stefan Mavrodiev <stefan at olimex.com>
> + */
> +
> +#include "sun7i-a20-olinuxino-lime.dts"
> +
> +/ {
> + model = "Olimex A20-OLinuXino-LIME-eMMC";
> + compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
> +
> + mmc2_pwrseq: pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&mmc2 {
> + vmmc-supply = <®_vcc3v3>;
> + vqmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + non-removable;
> + mmc-pwrseq = <&mmc2_pwrseq>;
> + status = "okay";
> +
> + emmc: emmc at 0 {
> + reg = <0>;
> + compatible = "mmc-card";
> + broken-hpi;
> + };
> +};
> diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
> index 5e411194bf..92938d0222 100644
> --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
> +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
> @@ -78,7 +78,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&led_pins_olinuxinolime>;
>
> - green {
> + led {
> label = "a20-olinuxino-lime:green:usr";
> gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -106,13 +106,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -149,6 +145,12 @@
> };
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -174,18 +176,6 @@
> function = "gpio_out";
> drive-strength = <20>;
> };
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> };
>
> ®_ahci_5v {
> @@ -217,10 +207,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
> index 996201665b..ecb91fb899 100644
> --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
> +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
> @@ -75,7 +75,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&led_pins_olinuxinolime>;
>
> - green {
> + led {
> label = "a20-olinuxino-lime2:green:usr";
> gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -111,13 +111,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii-id";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -154,6 +150,12 @@
> vref-supply = <®_vcc3v0>;
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -174,23 +176,17 @@
> };
>
> &pio {
> + vcc-pa-supply = <®_vcc3v3>;
> + vcc-pc-supply = <®_vcc3v3>;
> + vcc-pe-supply = <®_ldo3>;
> + vcc-pf-supply = <®_vcc3v3>;
> + vcc-pg-supply = <®_ldo4>;
> +
> led_pins_olinuxinolime: led-pins {
> pins = "PH2";
> function = "gpio_out";
> drive-strength = <20>;
> };
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> };
>
> ®_ahci_5v {
> @@ -200,6 +196,14 @@
>
> #include "axp209.dtsi"
>
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&battery_power_supply {
> + status = "okay";
> +};
> +
> ®_dcdc2 {
> regulator-always-on;
> regulator-min-microvolt = <1000000>;
> @@ -267,10 +271,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
> index 840ae1194a..a1b89b2a29 100644
> --- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
> +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
> @@ -82,7 +82,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&led_pins_olinuxino>;
>
> - green {
> + led {
> label = "a20-olinuxino-micro:green:usr";
> gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> @@ -118,13 +118,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -215,6 +211,12 @@
> };
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -252,18 +254,6 @@
> function = "gpio_out";
> drive-strength = <20>;
> };
> -
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -
> - usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> - pins = "PH5";
> - function = "gpio_in";
> - bias-pull-down;
> - };
> };
>
> #include "axp209.dtsi"
> @@ -355,10 +345,8 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
> index 15881081ca..84efa01e7c 100644
> --- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
> +++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
> @@ -75,12 +75,12 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led-0 {
> label = "orangepi:green:usr";
> gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
> };
>
> - blue {
> + led-1 {
> label = "orangepi:blue:usr";
> gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
> };
> @@ -120,14 +120,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -158,6 +154,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -176,14 +178,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_dcdc2 {
> regulator-always-on;
> regulator-min-microvolt = <1000000>;
> @@ -239,9 +233,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
> index d64de2e73a..5d77f1d981 100644
> --- a/arch/arm/dts/sun7i-a20-orangepi.dts
> +++ b/arch/arm/dts/sun7i-a20-orangepi.dts
> @@ -64,7 +64,7 @@
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led {
> label = "orangepi:green:usr";
> gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
> };
> @@ -96,14 +96,10 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii";
> phy-supply = <®_gmac_3v3>;
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -124,6 +120,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -135,14 +137,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_dcdc2 {
> regulator-always-on;
> regulator-min-microvolt = <1000000>;
> @@ -198,9 +192,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
> index 205eaae44a..e40ecb48d7 100644
> --- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
> +++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
> @@ -1,5 +1,5 @@
> /*
> - * Copyright 2015 Adam Sampson <ats at offog.org>
> + * Copyright 2015-2020 Adam Sampson <ats at offog.org>
> *
> * This file is dual-licensed: you can use it either under the terms
> * of the GPL or the X11 license, at your option. Note that this dual
> @@ -72,14 +72,12 @@
> leds {
> compatible = "gpio-leds";
>
> - /* Marked "LED3" on the PCB. */
> - usr1 {
> + led-3 {
> label = "pcduino3-nano:green:usr1";
> gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
> };
>
> - /* Marked "LED4" on the PCB. */
> - usr2 {
> + led-4 {
> label = "pcduino3-nano:green:usr2";
> gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
> };
> @@ -114,13 +112,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii-id";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &hdmi {
> @@ -149,6 +143,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -168,14 +168,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_ahci_5v {
> gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> status = "okay";
> @@ -226,9 +218,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb1_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
> index a72ed4318d..4f8d55d3ba 100644
> --- a/arch/arm/dts/sun7i-a20-pcduino3.dts
> +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
> @@ -64,12 +64,12 @@
> leds {
> compatible = "gpio-leds";
>
> - tx {
> + led-0 {
> label = "pcduino3:green:tx";
> gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
> };
>
> - rx {
> + led-1 {
> label = "pcduino3:green:rx";
> gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
> };
> @@ -122,13 +122,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_mii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -149,6 +145,12 @@
> status = "okay";
> };
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -168,14 +170,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_ahci_5v {
> gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> status = "okay";
> @@ -226,9 +220,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb1_vbus-supply = <®_usb1_vbus>;
> usb2_vbus-supply = <®_usb2_vbus>;
> status = "okay";
> diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
> index ffade253d1..fef02fcbbd 100644
> --- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
> +++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
> @@ -64,6 +64,7 @@
> brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
> default-brightness-level = <8>;
> enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> + power-supply = <®_vcc3v3>;
> };
>
> chosen {
> @@ -156,14 +157,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> &pwm {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm0_pin>;
> @@ -223,9 +216,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
> index c27e56091f..3bfae98f3c 100644
> --- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
> +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
> @@ -81,13 +81,9 @@
> &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> - phy = <&phy1>;
> + phy-handle = <&phy1>;
> phy-mode = "rgmii";
> status = "okay";
> -
> - phy1: ethernet-phy at 1 {
> - reg = <1>;
> - };
> };
>
> &i2c0 {
> @@ -110,6 +106,12 @@
>
> #include "axp209.dtsi"
>
> +&gmac_mdio {
> + phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_vcc3v3>;
> bus-width = <4>;
> @@ -145,14 +147,6 @@
> status = "okay";
> };
>
> -&pio {
> - usb0_id_detect_pin: usb0-id-detect-pin {
> - pins = "PH4";
> - function = "gpio_in";
> - bias-pull-up;
> - };
> -};
> -
> ®_dcdc2 {
> regulator-always-on;
> regulator-min-microvolt = <1000000>;
> @@ -206,9 +200,7 @@
> };
>
> &usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> usb0_vbus_power-supply = <&usb_power_supply>;
> usb0_vbus-supply = <®_usb0_vbus>;
> usb1_vbus-supply = <®_usb1_vbus>;
> diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
> index 641a8fa6d4..5574299685 100644
> --- a/arch/arm/dts/sun7i-a20.dtsi
> +++ b/arch/arm/dts/sun7i-a20.dtsi
> @@ -47,6 +47,7 @@
> #include <dt-bindings/dma/sun4i-a10.h>
> #include <dt-bindings/clock/sun7i-a20-ccu.h>
> #include <dt-bindings/reset/sun4i-a10-ccu.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -105,16 +106,15 @@
> reg = <0>;
> clocks = <&ccu CLK_CPU>;
> clock-latency = <244144>; /* 8 32k periods */
> - operating-points = <
> + operating-points =
> /* kHz uV */
> - 960000 1400000
> - 912000 1400000
> - 864000 1300000
> - 720000 1200000
> - 528000 1100000
> - 312000 1000000
> - 144000 1000000
> - >;
> + <960000 1400000>,
> + <912000 1400000>,
> + <864000 1300000>,
> + <720000 1200000>,
> + <528000 1100000>,
> + <312000 1000000>,
> + <144000 1000000>;
> #cooling-cells = <2>;
> };
>
> @@ -124,22 +124,21 @@
> reg = <1>;
> clocks = <&ccu CLK_CPU>;
> clock-latency = <244144>; /* 8 32k periods */
> - operating-points = <
> + operating-points =
> /* kHz uV */
> - 960000 1400000
> - 912000 1400000
> - 864000 1300000
> - 720000 1200000
> - 528000 1100000
> - 312000 1000000
> - 144000 1000000
> - >;
> + <960000 1400000>,
> + <912000 1400000>,
> + <864000 1300000>,
> + <720000 1200000>,
> + <528000 1100000>,
> + <312000 1000000>,
> + <144000 1000000>;
> #cooling-cells = <2>;
> };
> };
>
> thermal-zones {
> - cpu_thermal {
> + cpu-thermal {
> /* milliseconds */
> polling-delay-passive = <250>;
> polling-delay = <1000>;
> @@ -180,7 +179,7 @@
> default-pool {
> compatible = "shared-dma-pool";
> size = <0x6000000>;
> - alloc-ranges = <0x4a000000 0x6000000>;
> + alloc-ranges = <0x40000000 0x10000000>;
> reusable;
> linux,cma-default;
> };
> @@ -333,7 +332,7 @@
> #dma-cells = <2>;
> };
>
> - nfc: nand at 1c03000 {
> + nfc: nand-controller at 1c03000 {
> compatible = "allwinner,sun4i-a10-nand";
> reg = <0x01c03000 0x1000>;
> interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> @@ -376,6 +375,16 @@
> num-cs = <1>;
> };
>
> + csi0: csi at 1c09000 {
> + compatible = "allwinner,sun7i-a20-csi0";
> + reg = <0x01c09000 0x1000>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
> + clock-names = "bus", "isp", "ram";
> + resets = <&ccu RST_CSI0>;
> + status = "disabled";
> + };
> +
> emac: ethernet at 1c0b000 {
> compatible = "allwinner,sun4i-a10-emac";
> reg = <0x01c0b000 0x1000>;
> @@ -394,11 +403,12 @@
> };
>
> tcon0: lcd-controller at 1c0c000 {
> - compatible = "allwinner,sun7i-a20-tcon";
> + compatible = "allwinner,sun7i-a20-tcon0",
> + "allwinner,sun7i-a20-tcon";
> reg = <0x01c0c000 0x1000>;
> interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> - resets = <&ccu RST_TCON0>;
> - reset-names = "lcd";
> + resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
> + reset-names = "lcd", "lvds";
> clocks = <&ccu CLK_AHB_LCD0>,
> <&ccu CLK_TCON0_CH0>,
> <&ccu CLK_TCON0_CH1>;
> @@ -406,6 +416,7 @@
> "tcon-ch0",
> "tcon-ch1";
> clock-output-names = "tcon0-pixel-clock";
> + #clock-cells = <0>;
> dmas = <&dma SUN4I_DMA_DEDICATED 14>;
>
> ports {
> @@ -443,7 +454,8 @@
> };
>
> tcon1: lcd-controller at 1c0d000 {
> - compatible = "allwinner,sun7i-a20-tcon";
> + compatible = "allwinner,sun7i-a20-tcon1",
> + "allwinner,sun7i-a20-tcon";
> reg = <0x01c0d000 0x1000>;
> interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> resets = <&ccu RST_TCON1>;
> @@ -455,6 +467,7 @@
> "tcon-ch0",
> "tcon-ch1";
> clock-output-names = "tcon1-pixel-clock";
> + #clock-cells = <0>;
> dmas = <&dma SUN4I_DMA_DEDICATED 15>;
>
> ports {
> @@ -586,13 +599,14 @@
> phy-names = "usb";
> extcon = <&usbphy 0>;
> allwinner,sram = <&otg_sram 1>;
> + dr_mode = "otg";
> status = "disabled";
> };
>
> usbphy: phy at 1c13400 {
> #phy-cells = <1>;
> compatible = "allwinner,sun7i-a20-usb-phy";
> - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
> + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
> reg-names = "phy_ctrl", "pmu1", "pmu2";
> clocks = <&ccu CLK_USB_PHY>;
> clock-names = "usb_phy";
> @@ -716,6 +730,17 @@
> status = "disabled";
> };
>
> + csi1: csi at 1c1d000 {
> + compatible = "allwinner,sun7i-a20-csi1",
> + "allwinner,sun4i-a10-csi1";
> + reg = <0x01c1d000 0x1000>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
> + clock-names = "bus", "ram";
> + resets = <&ccu RST_CSI1>;
> + status = "disabled";
> + };
> +
> spi3: spi at 1c1f000 {
> compatible = "allwinner,sun4i-a10-spi";
> reg = <0x01c1f000 0x1000>;
> @@ -751,21 +776,70 @@
> #interrupt-cells = <3>;
> #gpio-cells = <3>;
>
> + /omit-if-no-ref/
> + can_pa_pins: can-pa-pins {
> + pins = "PA16", "PA17";
> + function = "can";
> + };
> +
> + /omit-if-no-ref/
> can_ph_pins: can-ph-pins {
> pins = "PH20", "PH21";
> function = "can";
> };
>
> + /omit-if-no-ref/
> clk_out_a_pin: clk-out-a-pin {
> pins = "PI12";
> function = "clk_out_a";
> };
>
> + /omit-if-no-ref/
> clk_out_b_pin: clk-out-b-pin {
> pins = "PI13";
> function = "clk_out_b";
> };
>
> + /omit-if-no-ref/
> + csi0_8bits_pins: csi-8bits-pins {
> + pins = "PE0", "PE2", "PE3", "PE4", "PE5",
> + "PE6", "PE7", "PE8", "PE9", "PE10",
> + "PE11";
> + function = "csi0";
> + };
> +
> + /omit-if-no-ref/
> + csi0_clk_pin: csi-clk-pin {
> + pins = "PE1";
> + function = "csi0";
> + };
> +
> + /omit-if-no-ref/
> + csi1_8bits_pg_pins: csi1-8bits-pg-pins {
> + pins = "PG0", "PG2", "PG3", "PG4", "PG5",
> + "PG6", "PG7", "PG8", "PG9", "PG10",
> + "PG11";
> + function = "csi1";
> + };
> +
> + /omit-if-no-ref/
> + csi1_24bits_ph_pins: csi1-24bits-ph-pins {
> + pins = "PH0", "PH1", "PH2", "PH3", "PH4",
> + "PH5", "PH6", "PH7", "PH8", "PH9",
> + "PH10", "PH11", "PH12", "PH13", "PH14",
> + "PH15", "PH16", "PH17", "PH18", "PH19",
> + "PH20", "PH21", "PH22", "PH23", "PH24",
> + "PH25", "PH26", "PH27";
> + function = "csi1";
> + };
> +
> + /omit-if-no-ref/
> + csi1_clk_pg_pin: csi1-clk-pg-pin {
> + pins = "PG1";
> + function = "csi1";
> + };
> +
> + /omit-if-no-ref/
> emac_pa_pins: emac-pa-pins {
> pins = "PA0", "PA1", "PA2",
> "PA3", "PA4", "PA5", "PA6",
> @@ -775,6 +849,17 @@
> function = "emac";
> };
>
> + /omit-if-no-ref/
> + emac_ph_pins: emac-ph-pins {
> + pins = "PH8", "PH9", "PH10", "PH11",
> + "PH14", "PH15", "PH16", "PH17",
> + "PH18", "PH19", "PH20", "PH21",
> + "PH22", "PH23", "PH24", "PH25",
> + "PH26";
> + function = "emac";
> + };
> +
> + /omit-if-no-ref/
> gmac_mii_pins: gmac-mii-pins {
> pins = "PA0", "PA1", "PA2",
> "PA3", "PA4", "PA5", "PA6",
> @@ -784,6 +869,7 @@
> function = "gmac";
> };
>
> + /omit-if-no-ref/
> gmac_rgmii_pins: gmac-rgmii-pins {
> pins = "PA0", "PA1", "PA2",
> "PA3", "PA4", "PA5", "PA6",
> @@ -798,46 +884,69 @@
> drive-strength = <40>;
> };
>
> + /omit-if-no-ref/
> i2c0_pins: i2c0-pins {
> pins = "PB0", "PB1";
> function = "i2c0";
> };
>
> + /omit-if-no-ref/
> i2c1_pins: i2c1-pins {
> pins = "PB18", "PB19";
> function = "i2c1";
> };
>
> + /omit-if-no-ref/
> i2c2_pins: i2c2-pins {
> pins = "PB20", "PB21";
> function = "i2c2";
> };
>
> + /omit-if-no-ref/
> i2c3_pins: i2c3-pins {
> pins = "PI0", "PI1";
> function = "i2c3";
> };
>
> + /omit-if-no-ref/
> ir0_rx_pin: ir0-rx-pin {
> pins = "PB4";
> function = "ir0";
> };
>
> + /omit-if-no-ref/
> ir0_tx_pin: ir0-tx-pin {
> pins = "PB3";
> function = "ir0";
> };
>
> + /omit-if-no-ref/
> ir1_rx_pin: ir1-rx-pin {
> pins = "PB23";
> function = "ir1";
> };
>
> + /omit-if-no-ref/
> ir1_tx_pin: ir1-tx-pin {
> pins = "PB22";
> function = "ir1";
> };
>
> + /omit-if-no-ref/
> + lcd_lvds0_pins: lcd-lvds0-pins {
> + pins = "PD0", "PD1", "PD2", "PD3", "PD4",
> + "PD5", "PD6", "PD7", "PD8", "PD9";
> + function = "lvds0";
> + };
> +
> + /omit-if-no-ref/
> + lcd_lvds1_pins: lcd-lvds1-pins {
> + pins = "PD10", "PD11", "PD12", "PD13", "PD14",
> + "PD15", "PD16", "PD17", "PD18", "PD19";
> + function = "lvds1";
> + };
> +
> + /omit-if-no-ref/
> mmc0_pins: mmc0-pins {
> pins = "PF0", "PF1", "PF2",
> "PF3", "PF4", "PF5";
> @@ -846,6 +955,7 @@
> bias-pull-up;
> };
>
> + /omit-if-no-ref/
> mmc2_pins: mmc2-pins {
> pins = "PC6", "PC7", "PC8",
> "PC9", "PC10", "PC11";
> @@ -854,6 +964,7 @@
> bias-pull-up;
> };
>
> + /omit-if-no-ref/
> mmc3_pins: mmc3-pins {
> pins = "PI4", "PI5", "PI6",
> "PI7", "PI8", "PI9";
> @@ -862,127 +973,206 @@
> bias-pull-up;
> };
>
> + /omit-if-no-ref/
> ps2_0_pins: ps2-0-pins {
> pins = "PI20", "PI21";
> function = "ps2";
> };
>
> + /omit-if-no-ref/
> ps2_1_ph_pins: ps2-1-ph-pins {
> pins = "PH12", "PH13";
> function = "ps2";
> };
>
> + /omit-if-no-ref/
> pwm0_pin: pwm0-pin {
> pins = "PB2";
> function = "pwm";
> };
>
> + /omit-if-no-ref/
> pwm1_pin: pwm1-pin {
> pins = "PI3";
> function = "pwm";
> };
>
> + /omit-if-no-ref/
> spdif_tx_pin: spdif-tx-pin {
> pins = "PB13";
> function = "spdif";
> bias-pull-up;
> };
>
> + /omit-if-no-ref/
> spi0_pi_pins: spi0-pi-pins {
> pins = "PI11", "PI12", "PI13";
> function = "spi0";
> };
>
> + /omit-if-no-ref/
> spi0_cs0_pi_pin: spi0-cs0-pi-pin {
> pins = "PI10";
> function = "spi0";
> };
>
> + /omit-if-no-ref/
> spi0_cs1_pi_pin: spi0-cs1-pi-pin {
> pins = "PI14";
> function = "spi0";
> };
>
> + /omit-if-no-ref/
> spi1_pi_pins: spi1-pi-pins {
> pins = "PI17", "PI18", "PI19";
> function = "spi1";
> };
>
> + /omit-if-no-ref/
> spi1_cs0_pi_pin: spi1-cs0-pi-pin {
> pins = "PI16";
> function = "spi1";
> };
>
> + /omit-if-no-ref/
> spi2_pb_pins: spi2-pb-pins {
> pins = "PB15", "PB16", "PB17";
> function = "spi2";
> };
>
> + /omit-if-no-ref/
> spi2_cs0_pb_pin: spi2-cs0-pb-pin {
> pins = "PB14";
> function = "spi2";
> };
>
> + /omit-if-no-ref/
> spi2_pc_pins: spi2-pc-pins {
> pins = "PC20", "PC21", "PC22";
> function = "spi2";
> };
>
> + /omit-if-no-ref/
> spi2_cs0_pc_pin: spi2-cs0-pc-pin {
> pins = "PC19";
> function = "spi2";
> };
>
> + /omit-if-no-ref/
> uart0_pb_pins: uart0-pb-pins {
> pins = "PB22", "PB23";
> function = "uart0";
> };
>
> + /omit-if-no-ref/
> + uart0_pf_pins: uart0-pf-pins {
> + pins = "PF2", "PF4";
> + function = "uart0";
> + };
> +
> + /omit-if-no-ref/
> + uart1_pa_pins: uart1-pa-pins {
> + pins = "PA10", "PA11";
> + function = "uart1";
> + };
> +
> + /omit-if-no-ref/
> + uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
> + pins = "PA12", "PA13";
> + function = "uart1";
> + };
> +
> + /omit-if-no-ref/
> + uart2_pa_pins: uart2-pa-pins {
> + pins = "PA2", "PA3";
> + function = "uart2";
> + };
> +
> + /omit-if-no-ref/
> + uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
> + pins = "PA0", "PA1";
> + function = "uart2";
> + };
> +
> + /omit-if-no-ref/
> uart2_pi_pins: uart2-pi-pins {
> pins = "PI18", "PI19";
> function = "uart2";
> };
>
> + /omit-if-no-ref/
> uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
> pins = "PI16", "PI17";
> function = "uart2";
> };
>
> + /omit-if-no-ref/
> uart3_pg_pins: uart3-pg-pins {
> pins = "PG6", "PG7";
> function = "uart3";
> };
>
> + /omit-if-no-ref/
> uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
> pins = "PG8", "PG9";
> function = "uart3";
> };
>
> + /omit-if-no-ref/
> uart3_ph_pins: uart3-ph-pins {
> pins = "PH0", "PH1";
> function = "uart3";
> };
>
> + /omit-if-no-ref/
> + uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
> + pins = "PH2", "PH3";
> + function = "uart3";
> + };
> +
> + /omit-if-no-ref/
> uart4_pg_pins: uart4-pg-pins {
> pins = "PG10", "PG11";
> function = "uart4";
> };
>
> + /omit-if-no-ref/
> uart4_ph_pins: uart4-ph-pins {
> pins = "PH4", "PH5";
> function = "uart4";
> };
>
> + /omit-if-no-ref/
> + uart5_ph_pins: uart5-ph-pins {
> + pins = "PH6", "PH7";
> + function = "uart5";
> + };
> +
> + /omit-if-no-ref/
> uart5_pi_pins: uart5-pi-pins {
> pins = "PI10", "PI11";
> function = "uart5";
> };
>
> + /omit-if-no-ref/
> + uart6_pa_pins: uart6-pa-pins {
> + pins = "PA12", "PA13";
> + function = "uart6";
> + };
> +
> + /omit-if-no-ref/
> uart6_pi_pins: uart6-pi-pins {
> pins = "PI12", "PI13";
> function = "uart6";
> };
>
> + /omit-if-no-ref/
> + uart7_pa_pins: uart7-pa-pins {
> + pins = "PA14", "PA15";
> + function = "uart7";
> + };
> +
> + /omit-if-no-ref/
> uart7_pi_pins: uart7-pi-pins {
> pins = "PI20", "PI21";
> function = "uart7";
> @@ -1004,6 +1194,8 @@
> wdt: watchdog at 1c20c90 {
> compatible = "allwinner,sun4i-a10-wdt";
> reg = <0x01c20c90 0x10>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&osc24M>;
> };
>
> rtc: rtc at 1c20d00 {
> @@ -1326,8 +1518,12 @@
> snps,fixed-burst;
> snps,force_sf_dma_mode;
> status = "disabled";
> - #address-cells = <1>;
> - #size-cells = <0>;
> +
> + gmac_mdio: mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> };
>
> hstimer at 1c60000 {
> @@ -1341,7 +1537,7 @@
> };
>
> gic: interrupt-controller at 1c81000 {
> - compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
> + compatible = "arm,gic-400";
> reg = <0x01c81000 0x1000>,
> <0x01c82000 0x2000>,
> <0x01c84000 0x2000>,
More information about the U-Boot
mailing list