[PATCH v2 04/16] arm: stm32mp: move code for STM32MP15x
Patrick Delaunay
patrick.delaunay at foss.st.com
Fri May 20 18:24:42 CEST 2022
Move code and defines only needed for CONFIG_STM32MP15x in stm32mp15x.c
when low level init without TFABOOT is supported.
Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
(no changes since v1)
arch/arm/mach-stm32mp/Makefile | 2 +
arch/arm/mach-stm32mp/cpu.c | 331 +----------------
arch/arm/mach-stm32mp/fdt.c | 8 +-
.../arm/mach-stm32mp/include/mach/sys_proto.h | 14 +-
arch/arm/mach-stm32mp/spl.c | 1 +
arch/arm/mach-stm32mp/stm32mp15x.c | 345 ++++++++++++++++++
6 files changed, 377 insertions(+), 324 deletions(-)
create mode 100644 arch/arm/mach-stm32mp/stm32mp15x.c
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index 391b47cf13..d362104fee 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -8,6 +8,8 @@ obj-y += dram_init.o
obj-y += syscon.o
obj-y += bsec.o
+obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
+
ifdef CONFIG_SPL_BUILD
obj-y += spl.o
obj-y += tzc400.o
diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index 6f44c75515..b808964d3e 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -16,7 +16,6 @@
#include <misc.h>
#include <net.h>
#include <asm/io.h>
-#include <asm/arch/bsec.h>
#include <asm/arch/stm32.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
@@ -24,67 +23,6 @@
#include <dm/uclass.h>
#include <linux/bitops.h>
-/* RCC register */
-#define RCC_TZCR (STM32_RCC_BASE + 0x00)
-#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
-#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
-#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
-#define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210)
-#define RCC_BDCR_VSWRST BIT(31)
-#define RCC_BDCR_RTCSRC GENMASK(17, 16)
-#define RCC_DBGCFGR_DBGCKEN BIT(8)
-
-/* Security register */
-#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
-#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)
-
-#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
-#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
-#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)
-
-#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)
-
-#define PWR_CR1 (STM32_PWR_BASE + 0x00)
-#define PWR_MCUCR (STM32_PWR_BASE + 0x14)
-#define PWR_CR1_DBP BIT(8)
-#define PWR_MCUCR_SBF BIT(6)
-
-/* DBGMCU register */
-#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
-#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
-#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
-#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
-#define DBGMCU_IDC_DEV_ID_SHIFT 0
-#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
-#define DBGMCU_IDC_REV_ID_SHIFT 16
-
-/* GPIOZ registers */
-#define GPIOZ_SECCFGR 0x54004030
-
-/* boot interface from Bootrom
- * - boot instance = bit 31:16
- * - boot device = bit 15:0
- */
-#define BOOTROM_PARAM_ADDR 0x2FFC0078
-#define BOOTROM_MODE_MASK GENMASK(15, 0)
-#define BOOTROM_MODE_SHIFT 0
-#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
-#define BOOTROM_INSTANCE_SHIFT 16
-
-/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
-#define RPN_SHIFT 0
-#define RPN_MASK GENMASK(7, 0)
-
-/* Package = bit 27:29 of OTP16
- * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
- * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
- * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
- * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
- * - others: Reserved
- */
-#define PKG_SHIFT 27
-#define PKG_MASK GENMASK(2, 0)
-
/*
* early TLB into the .data section so that it not get cleared
* with 16kB allignment (see TTBR0_BASE_ADDR_MASK)
@@ -93,121 +31,6 @@ u8 early_tlb[PGTABLE_SIZE] __section(".data") __aligned(0x4000);
struct lmb lmb;
-static void security_init(void)
-{
- /* Disable the backup domain write protection */
- /* the protection is enable at each reset by hardware */
- /* And must be disable by software */
- setbits_le32(PWR_CR1, PWR_CR1_DBP);
-
- while (!(readl(PWR_CR1) & PWR_CR1_DBP))
- ;
-
- /* If RTC clock isn't enable so this is a cold boot then we need
- * to reset the backup domain
- */
- if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
- setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
- while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
- ;
- clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
- }
-
- /* allow non secure access in Write/Read for all peripheral */
- writel(GENMASK(25, 0), ETZPC_DECPROT0);
-
- /* Open SYSRAM for no secure access */
- writel(0x0, ETZPC_TZMA1_SIZE);
-
- /* enable TZC1 TZC2 clock */
- writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
-
- /* Region 0 set to no access by default */
- /* bit 0 / 16 => nsaid0 read/write Enable
- * bit 1 / 17 => nsaid1 read/write Enable
- * ...
- * bit 15 / 31 => nsaid15 read/write Enable
- */
- writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
- /* bit 30 / 31 => Secure Global Enable : write/read */
- /* bit 0 / 1 => Region Enable for filter 0/1 */
- writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
-
- /* Enable Filter 0 and 1 */
- setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
-
- /* RCC trust zone deactivated */
- writel(0x0, RCC_TZCR);
-
- /* TAMP: deactivate the internal tamper
- * Bit 23 ITAMP8E: monotonic counter overflow
- * Bit 20 ITAMP5E: RTC calendar overflow
- * Bit 19 ITAMP4E: HSE monitoring
- * Bit 18 ITAMP3E: LSE monitoring
- * Bit 16 ITAMP1E: RTC power domain supply monitoring
- */
- writel(0x0, TAMP_CR1);
-
- /* GPIOZ: deactivate the security */
- writel(BIT(0), RCC_MP_AHB5ENSETR);
- writel(0x0, GPIOZ_SECCFGR);
-}
-
-/*
- * Debug init
- */
-static void dbgmcu_init(void)
-{
- /*
- * Freeze IWDG2 if Cortex-A7 is in debug mode
- * done in TF-A for TRUSTED boot and
- * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
- */
- if (bsec_dbgswenable()) {
- setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
- setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
- }
-}
-
-void spl_board_init(void)
-{
- struct udevice *dev;
- int ret;
-
- dbgmcu_init();
-
- /* force probe of BSEC driver to shadow the upper OTP */
- ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
- if (ret)
- log_warning("BSEC probe failed: %d\n", ret);
-}
-
-/* get bootmode from ROM code boot context: saved in TAMP register */
-static void update_bootmode(void)
-{
- u32 boot_mode;
- u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
- u32 bootrom_device, bootrom_instance;
-
- /* enable TAMP clock = RTCAPBEN */
- writel(BIT(8), RCC_MP_APB5ENSETR);
-
- /* read bootrom context */
- bootrom_device =
- (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
- bootrom_instance =
- (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
- boot_mode =
- ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
- ((bootrom_instance << BOOT_INSTANCE_SHIFT) &
- BOOT_INSTANCE_MASK);
-
- /* save the boot mode in TAMP backup register */
- clrsetbits_le32(TAMP_BOOT_CONTEXT,
- TAMP_BOOT_MODE_MASK,
- boot_mode << TAMP_BOOT_MODE_SHIFT);
-}
-
u32 get_bootmode(void)
{
/* read bootmode from TAMP backup register */
@@ -277,25 +100,24 @@ static void early_enable_caches(void)
*/
int arch_cpu_init(void)
{
- u32 boot_mode;
-
early_enable_caches();
/* early armv7 timer init: needed for polling */
timer_init();
- if (IS_ENABLED(CONFIG_SPL_BUILD)) {
- security_init();
- update_bootmode();
- }
-/* reset copro state in SPL, when used, or in U-Boot */
- if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
- /* Reset Coprocessor state unless it wakes up from Standby power mode */
- if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
- writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
- writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
- }
- }
+ return 0;
+}
+
+/* weak function for SOC specific initialization */
+__weak void stm32mp_cpu_init(void)
+{
+}
+
+int mach_cpu_init(void)
+{
+ u32 boot_mode;
+
+ stm32mp_cpu_init();
boot_mode = get_bootmode();
@@ -324,122 +146,6 @@ void enable_caches(void)
dcache_enable();
}
-static u32 read_idc(void)
-{
- /* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
- if (bsec_dbgswenable()) {
- setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
-
- return readl(DBGMCU_IDC);
- }
-
- if (CONFIG_IS_ENABLED(STM32MP15x))
- return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
- else
- return 0x0;
-}
-
-u32 get_cpu_dev(void)
-{
- return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
-}
-
-u32 get_cpu_rev(void)
-{
- return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
-}
-
-/* Get Device Part Number (RPN) from OTP */
-static u32 get_cpu_rpn(void)
-{
- return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
-}
-
-u32 get_cpu_type(void)
-{
- return (get_cpu_dev() << 16) | get_cpu_rpn();
-}
-
-/* Get Package options from OTP */
-u32 get_cpu_package(void)
-{
- return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
-}
-
-static const char * const soc_type[] = {
- "????",
- "151C", "151A", "151F", "151D",
- "153C", "153A", "153F", "153D",
- "157C", "157A", "157F", "157D"
-};
-
-static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
-static const char * const soc_rev[] = { "?", "A", "B", "Z" };
-
-static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
- unsigned int *rev)
-{
- u32 cpu_type = get_cpu_type();
- u32 ct = cpu_type & ~(BIT(7) | BIT(0));
- u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
- u32 cp = get_cpu_package();
-
- /* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
- switch (ct) {
- case CPU_STM32MP151Cxx:
- *type = cm + 1;
- break;
- case CPU_STM32MP153Cxx:
- *type = cm + 5;
- break;
- case CPU_STM32MP157Cxx:
- *type = cm + 9;
- break;
- default:
- *type = 0;
- break;
- }
-
- /* Package */
- switch (cp) {
- case PKG_AA_LBGA448:
- case PKG_AB_LBGA354:
- case PKG_AC_TFBGA361:
- case PKG_AD_TFBGA257:
- *pkg = cp;
- break;
- default:
- *pkg = 0;
- break;
- }
-
- /* Revision */
- switch (get_cpu_rev()) {
- case CPU_REV1:
- *rev = 1;
- break;
- case CPU_REV2:
- *rev = 2;
- break;
- case CPU_REV2_1:
- *rev = 3;
- break;
- default:
- *rev = 0;
- break;
- }
-}
-
-void get_soc_name(char name[SOC_NAME_SIZE])
-{
- unsigned int type, pkg, rev;
-
- get_cpu_string_offsets(&type, &pkg, &rev);
-
- snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
- soc_type[type], soc_pkg[pkg], soc_rev[rev]);
-}
-
/* used when CONFIG_DISPLAY_CPUINFO is activated */
int print_cpuinfo(void)
{
@@ -645,15 +351,8 @@ static int setup_serial_number(void)
return 0;
}
-static void setup_soc_type_pkg_rev(void)
+__weak void stm32mp_misc_init(void)
{
- unsigned int type, pkg, rev;
-
- get_cpu_string_offsets(&type, &pkg, &rev);
-
- env_set("soc_type", soc_type[type]);
- env_set("soc_pkg", soc_pkg[pkg]);
- env_set("soc_rev", soc_rev[rev]);
}
int arch_misc_init(void)
@@ -661,7 +360,7 @@ int arch_misc_init(void)
setup_boot_mode();
setup_mac_address();
setup_serial_number();
- setup_soc_type_pkg_rev();
+ stm32mp_misc_init();
return 0;
}
diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
index b1a4b76566..7412f0e029 100644
--- a/arch/arm/mach-stm32mp/fdt.c
+++ b/arch/arm/mach-stm32mp/fdt.c
@@ -312,16 +312,16 @@ int ft_system_setup(void *blob, struct bd_info *bd)
}
switch (get_cpu_package()) {
- case PKG_AA_LBGA448:
+ case STM32MP15_PKG_AA_LBGA448:
pkg = STM32MP_PKG_AA;
break;
- case PKG_AB_LBGA354:
+ case STM32MP15_PKG_AB_LBGA354:
pkg = STM32MP_PKG_AB;
break;
- case PKG_AC_TFBGA361:
+ case STM32MP15_PKG_AC_TFBGA361:
pkg = STM32MP_PKG_AC;
break;
- case PKG_AD_TFBGA257:
+ case STM32MP15_PKG_AD_TFBGA257:
pkg = STM32MP_PKG_AD;
break;
default:
diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
index dc98f0c5a4..8b61135aeb 100644
--- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h
+++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
@@ -36,10 +36,12 @@ u32 get_cpu_rev(void);
/* Get Package options from OTP */
u32 get_cpu_package(void);
-#define PKG_AA_LBGA448 4
-#define PKG_AB_LBGA354 3
-#define PKG_AC_TFBGA361 2
-#define PKG_AD_TFBGA257 1
+/* package used for STM32MP15x */
+#define STM32MP15_PKG_AA_LBGA448 4
+#define STM32MP15_PKG_AB_LBGA354 3
+#define STM32MP15_PKG_AC_TFBGA361 2
+#define STM32MP15_PKG_AD_TFBGA257 1
+#define STM32MP15_PKG_UNKNOWN 0
/* Get SOC name */
#define SOC_NAME_SIZE 20
@@ -53,5 +55,9 @@ int setup_mac_address(void);
/* board power management : configure vddcore according OPP */
void board_vddcore_init(u32 voltage_mv);
+/* weak function */
+void stm32mp_cpu_init(void);
+void stm32mp_misc_init(void);
+
/* helper function: read data from OTP */
u32 get_otp(int index, int shift, int mask);
diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c
index 78fa9d7edd..19d9fe04e0 100644
--- a/arch/arm/mach-stm32mp/spl.c
+++ b/arch/arm/mach-stm32mp/spl.c
@@ -190,6 +190,7 @@ void board_init_f(ulong dummy)
int ret;
arch_cpu_init();
+ mach_cpu_init();
ret = spl_early_init();
if (ret) {
diff --git a/arch/arm/mach-stm32mp/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp15x.c
new file mode 100644
index 0000000000..800fad2f43
--- /dev/null
+++ b/arch/arm/mach-stm32mp/stm32mp15x.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
+/*
+ * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
+ */
+
+#define LOG_CATEGORY LOGC_ARCH
+
+#include <common.h>
+#include <env.h>
+#include <log.h>
+#include <asm/io.h>
+#include <asm/arch/bsec.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/sys_proto.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+
+/* RCC register */
+#define RCC_TZCR (STM32_RCC_BASE + 0x00)
+#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
+#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
+#define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210)
+#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
+
+#define RCC_BDCR_VSWRST BIT(31)
+#define RCC_BDCR_RTCSRC GENMASK(17, 16)
+
+#define RCC_DBGCFGR_DBGCKEN BIT(8)
+
+/* DBGMCU register */
+#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
+#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
+#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
+
+/* Security register */
+#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
+#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)
+
+#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
+#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
+#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)
+
+#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)
+
+#define PWR_CR1 (STM32_PWR_BASE + 0x00)
+#define PWR_MCUCR (STM32_PWR_BASE + 0x14)
+#define PWR_CR1_DBP BIT(8)
+#define PWR_MCUCR_SBF BIT(6)
+
+/* GPIOZ registers */
+#define GPIOZ_SECCFGR 0x54004030
+
+/* DBGMCU register */
+#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
+#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
+#define DBGMCU_IDC_DEV_ID_SHIFT 0
+#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
+#define DBGMCU_IDC_REV_ID_SHIFT 16
+
+/* boot interface from Bootrom
+ * - boot instance = bit 31:16
+ * - boot device = bit 15:0
+ */
+#define BOOTROM_PARAM_ADDR 0x2FFC0078
+#define BOOTROM_MODE_MASK GENMASK(15, 0)
+#define BOOTROM_MODE_SHIFT 0
+#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
+#define BOOTROM_INSTANCE_SHIFT 16
+
+/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
+#define RPN_SHIFT 0
+#define RPN_MASK GENMASK(7, 0)
+
+/* Package = bit 27:29 of OTP16 => STM32MP15_PKG defines
+ * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
+ * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
+ * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
+ * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
+ * - others: Reserved
+ */
+#define PKG_SHIFT 27
+#define PKG_MASK GENMASK(2, 0)
+
+static void security_init(void)
+{
+ /* Disable the backup domain write protection */
+ /* the protection is enable at each reset by hardware */
+ /* And must be disable by software */
+ setbits_le32(PWR_CR1, PWR_CR1_DBP);
+
+ while (!(readl(PWR_CR1) & PWR_CR1_DBP))
+ ;
+
+ /* If RTC clock isn't enable so this is a cold boot then we need
+ * to reset the backup domain
+ */
+ if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
+ setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
+ while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
+ ;
+ clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
+ }
+
+ /* allow non secure access in Write/Read for all peripheral */
+ writel(GENMASK(25, 0), ETZPC_DECPROT0);
+
+ /* Open SYSRAM for no secure access */
+ writel(0x0, ETZPC_TZMA1_SIZE);
+
+ /* enable TZC1 TZC2 clock */
+ writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
+
+ /* Region 0 set to no access by default */
+ /* bit 0 / 16 => nsaid0 read/write Enable
+ * bit 1 / 17 => nsaid1 read/write Enable
+ * ...
+ * bit 15 / 31 => nsaid15 read/write Enable
+ */
+ writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
+ /* bit 30 / 31 => Secure Global Enable : write/read */
+ /* bit 0 / 1 => Region Enable for filter 0/1 */
+ writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
+
+ /* Enable Filter 0 and 1 */
+ setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
+
+ /* RCC trust zone deactivated */
+ writel(0x0, RCC_TZCR);
+
+ /* TAMP: deactivate the internal tamper
+ * Bit 23 ITAMP8E: monotonic counter overflow
+ * Bit 20 ITAMP5E: RTC calendar overflow
+ * Bit 19 ITAMP4E: HSE monitoring
+ * Bit 18 ITAMP3E: LSE monitoring
+ * Bit 16 ITAMP1E: RTC power domain supply monitoring
+ */
+ writel(0x0, TAMP_CR1);
+
+ /* GPIOZ: deactivate the security */
+ writel(BIT(0), RCC_MP_AHB5ENSETR);
+ writel(0x0, GPIOZ_SECCFGR);
+}
+
+/*
+ * Debug init
+ */
+void dbgmcu_init(void)
+{
+ /*
+ * Freeze IWDG2 if Cortex-A7 is in debug mode
+ * done in TF-A for TRUSTED boot and
+ * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
+ */
+ if (bsec_dbgswenable()) {
+ setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
+ setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
+ }
+}
+
+void spl_board_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ dbgmcu_init();
+
+ /* force probe of BSEC driver to shadow the upper OTP */
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
+ if (ret)
+ log_warning("BSEC probe failed: %d\n", ret);
+}
+
+/* get bootmode from ROM code boot context: saved in TAMP register */
+static void update_bootmode(void)
+{
+ u32 boot_mode;
+ u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
+ u32 bootrom_device, bootrom_instance;
+
+ /* enable TAMP clock = RTCAPBEN */
+ writel(BIT(8), RCC_MP_APB5ENSETR);
+
+ /* read bootrom context */
+ bootrom_device =
+ (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
+ bootrom_instance =
+ (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
+ boot_mode =
+ ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
+ ((bootrom_instance << BOOT_INSTANCE_SHIFT) &
+ BOOT_INSTANCE_MASK);
+
+ /* save the boot mode in TAMP backup register */
+ clrsetbits_le32(TAMP_BOOT_CONTEXT,
+ TAMP_BOOT_MODE_MASK,
+ boot_mode << TAMP_BOOT_MODE_SHIFT);
+}
+
+/* weak function: STM32MP15x mach init for boot without TFA */
+void stm32mp_cpu_init(void)
+{
+ if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+ security_init();
+ update_bootmode();
+ }
+
+ /* reset copro state in SPL, when used, or in U-Boot */
+ if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
+ /* Reset Coprocessor state unless it wakes up from Standby power mode */
+ if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
+ writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
+ writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
+ }
+ }
+}
+
+static u32 read_idc(void)
+{
+ /* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
+ if (bsec_dbgswenable()) {
+ setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
+
+ return readl(DBGMCU_IDC);
+ }
+
+ return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
+}
+
+u32 get_cpu_dev(void)
+{
+ return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
+}
+
+u32 get_cpu_rev(void)
+{
+ return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
+}
+
+/* Get Device Part Number (RPN) from OTP */
+static u32 get_cpu_rpn(void)
+{
+ return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
+}
+
+u32 get_cpu_type(void)
+{
+ return (get_cpu_dev() << 16) | get_cpu_rpn();
+}
+
+/* Get Package options from OTP */
+u32 get_cpu_package(void)
+{
+ return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
+}
+
+static const char * const soc_type[] = {
+ "????",
+ "151C", "151A", "151F", "151D",
+ "153C", "153A", "153F", "153D",
+ "157C", "157A", "157F", "157D"
+};
+
+static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
+static const char * const soc_rev[] = { "?", "A", "B", "Z" };
+
+static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
+ unsigned int *rev)
+{
+ u32 cpu_type = get_cpu_type();
+ u32 ct = cpu_type & ~(BIT(7) | BIT(0));
+ u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
+ u32 cp = get_cpu_package();
+
+ /* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
+ switch (ct) {
+ case CPU_STM32MP151Cxx:
+ *type = cm + 1;
+ break;
+ case CPU_STM32MP153Cxx:
+ *type = cm + 5;
+ break;
+ case CPU_STM32MP157Cxx:
+ *type = cm + 9;
+ break;
+ default:
+ *type = 0;
+ break;
+ }
+
+ /* Package */
+ switch (cp) {
+ case STM32MP15_PKG_AA_LBGA448:
+ case STM32MP15_PKG_AB_LBGA354:
+ case STM32MP15_PKG_AC_TFBGA361:
+ case STM32MP15_PKG_AD_TFBGA257:
+ *pkg = cp;
+ break;
+ default:
+ *pkg = 0;
+ break;
+ }
+
+ /* Revision */
+ switch (get_cpu_rev()) {
+ case CPU_REV1:
+ *rev = 1;
+ break;
+ case CPU_REV2:
+ *rev = 2;
+ break;
+ case CPU_REV2_1:
+ *rev = 3;
+ break;
+ default:
+ *rev = 0;
+ break;
+ }
+}
+
+void get_soc_name(char name[SOC_NAME_SIZE])
+{
+ unsigned int type, pkg, rev;
+
+ get_cpu_string_offsets(&type, &pkg, &rev);
+
+ snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
+ soc_type[type], soc_pkg[pkg], soc_rev[rev]);
+}
+
+static void setup_soc_type_pkg_rev(void)
+{
+ unsigned int type, pkg, rev;
+
+ get_cpu_string_offsets(&type, &pkg, &rev);
+
+ env_set("soc_type", soc_type[type]);
+ env_set("soc_pkg", soc_pkg[pkg]);
+ env_set("soc_rev", soc_rev[rev]);
+}
+
+/* weak function called in arch_misc_init */
+void stm32mp_misc_init(void)
+{
+ setup_soc_type_pkg_rev();
+}
--
2.25.1
More information about the U-Boot
mailing list