[PATCH RFC v2 08/11] ti: tispl.bin: Removed script that packages tispl.bin

[Roger Quadros]

On 06/05/2022 07:37, Neha Malcom Francis wrote:
> As tispl.bin is to be packaged (with ATF, OPTEE, DM and A72 SPL) using
> binman, the shell script k3_fit_atf.sh is no longer needed. Removing

This is not true until you have migrated all K3 platforms to use binman.
So let's leave this script here for now.

> this file.
> 
> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>

cheers,
-roger

> ---
>  tools/k3_fit_atf.sh | 123 --------------------------------------------
>  1 file changed, 123 deletions(-)
>  delete mode 100755 tools/k3_fit_atf.sh
> 
> diff --git a/tools/k3_fit_atf.sh b/tools/k3_fit_atf.sh
> deleted file mode 100755
> index 7bc07ad074..0000000000
> --- a/tools/k3_fit_atf.sh
> +++ /dev/null
> @@ -1,123 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# script to generate FIT image source for K3 Family boards with
> -# ATF, OPTEE, SPL and multiple device trees (given on the command line).
> -# Inspired from board/sunxi/mksunxi_fit_atf.sh
> -#
> -# usage: $0 <atf_load_addr> <dt_name> [<dt_name> [<dt_name] ...]
> -
> -[ -z "$ATF" ] && ATF="bl31.bin"
> -
> -if [ ! -f $ATF ]; then
> -	echo "WARNING ATF file $ATF NOT found, resulting binary is non-functional" >&2
> -	ATF=/dev/null
> -fi
> -
> -[ -z "$TEE" ] && TEE="bl32.bin"
> -
> -if [ ! -f $TEE ]; then
> -	echo "WARNING OPTEE file $TEE NOT found, resulting might be non-functional" >&2
> -	TEE=/dev/null
> -fi
> -
> -[ -z "$DM" ] && DM="dm.bin"
> -
> -if [ ! -e $DM ]; then
> -	echo "WARNING DM file $DM NOT found, resulting might be non-functional" >&2
> -	DM=/dev/null
> -fi
> -
> -if [ ! -z "$IS_HS" ]; then
> -	HS_APPEND=_HS
> -fi
> -
> -cat << __HEADER_EOF
> -/dts-v1/;
> -
> -/ {
> -	description = "Configuration to load ATF and SPL";
> -	#address-cells = <1>;
> -
> -	images {
> -		atf {
> -			description = "ARM Trusted Firmware";
> -			data = /incbin/("$ATF");
> -			type = "firmware";
> -			arch = "arm64";
> -			compression = "none";
> -			os = "arm-trusted-firmware";
> -			load = <$1>;
> -			entry = <$1>;
> -		};
> -		tee {
> -			description = "OPTEE";
> -			data = /incbin/("$TEE");
> -			type = "tee";
> -			arch = "arm64";
> -			compression = "none";
> -			os = "tee";
> -			load = <0x9e800000>;
> -			entry = <0x9e800000>;
> -		};
> -		dm {
> -			description = "DM binary";
> -			data = /incbin/("$DM");
> -			type = "firmware";
> -			arch = "arm32";
> -			compression = "none";
> -			os = "DM";
> -			load = <0x89000000>;
> -			entry = <0x89000000>;
> -		};
> -		spl {
> -			description = "SPL (64-bit)";
> -			data = /incbin/("spl/u-boot-spl-nodtb.bin$HS_APPEND");
> -			type = "standalone";
> -			os = "U-Boot";
> -			arch = "arm64";
> -			compression = "none";
> -			load = <0x80080000>;
> -			entry = <0x80080000>;
> -		};
> -__HEADER_EOF
> -
> -# shift through ATF load address in the command line arguments
> -shift
> -
> -for dtname in $*
> -do
> -	cat << __FDT_IMAGE_EOF
> -		$(basename $dtname) {
> -			description = "$(basename $dtname .dtb)";
> -			data = /incbin/("$dtname$HS_APPEND");
> -			type = "flat_dt";
> -			arch = "arm";
> -			compression = "none";
> -		};
> -__FDT_IMAGE_EOF
> -done
> -
> -cat << __CONF_HEADER_EOF
> -	};
> -	configurations {
> -		default = "$(basename $1)";
> -
> -__CONF_HEADER_EOF
> -
> -for dtname in $*
> -do
> -	cat << __CONF_SECTION_EOF
> -		$(basename $dtname) {
> -			description = "$(basename $dtname .dtb)";
> -			firmware = "atf";
> -			loadables = "tee", "dm", "spl";
> -			fdt = "$(basename $dtname)";
> -		};
> -__CONF_SECTION_EOF
> -done
> -
> -cat << __ITS_EOF
> -	};
> -};
> -__ITS_EOF