[PATCH 4/5] serial: ns16550: Add support for SPL_DEBUG_UART_BASE

[Pali Rohár]

Use CONFIG_VAL(DEBUG_UART_BASE) instead of CONFIG_DEBUG_UART_BASE, so
proper config value (CONFIG_DEBUG_UART_BASE or CONFIG_SPL_DEBUG_UART_BASE)
is used based on building target.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 drivers/serial/ns16550.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index a4220fd0ae2f..78bfe6281ce3 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -325,7 +325,7 @@ int ns16550_tstc(struct ns16550 *com_port)
 
 static inline void _debug_uart_init(void)
 {
-	struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
+	struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE);
 	int baud_divisor;
 
 	/*
@@ -360,7 +360,7 @@ static inline int NS16550_read_baud_divisor(struct ns16550 *com_port)
 
 static inline void _debug_uart_putc(int ch)
 {
-	struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE;
+	struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE);
 
 	while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) {
 #ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED
-- 
2.20.1