[PATCH v2 0/8] imx8: switch missing boards to binman

[Fabio Estevam]

Hi Oliver and Stefano,

On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic <sbabic at denx.de> wrote:

> I have tried to merge the series, but I get build errors, see:
>
> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
>
> Could you take a look ?

One problem I noticed is the missing CONFIG_TEXT_BASE conversion:

diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index 3507489a813c..442e64badc39 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -50,7 +50,7 @@
                                        arch = "arm64";
                                        compression = "none";
                                        description = "U-Boot (64-bit)";
-                                       load = <CONFIG_SYS_TEXT_BASE>;
+                                       load = <CONFIG_TEXT_BASE>;
                                        type = "standalone";

                                        uboot-blob {
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
index 01183f8ade63..e8df5bb8bfea 100644
--- a/arch/arm/dts/imx8qxp-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -50,7 +50,7 @@
                                        arch = "arm64";
                                        compression = "none";
                                        description = "U-Boot (64-bit)";
-                                       load = <CONFIG_SYS_TEXT_BASE>;
+                                       load = <CONFIG_TEXT_BASE>;
                                        type = "standalone";

                                        uboot-blob {

With this fix applied, I got:

WARNING './ahab-container.img' not found, resulting binary is not-functional
make[1]: Nothing to be done for 'SPL'.
  BINMAN  all
binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
spl/u-boot-spl.cfgout -T imx8image -e 0x100000
./mkimage-out.spl.mkimage': Fail open first container file
ahab-container.img

make: *** [Makefile:1116: all] Error 1


but if I manually copy the firmware, then the build succeeds.

binman should not thrown an error in case of missing firmware. Oliver,
any ideas?

Also, some boards use ahab-container.img and others use
mx8qxc0-ahab-container.img.

Is it OK to use mx8qxc0-ahab-container.img for all of them?