[PATCH] pinctrl: sunxi: Add P2WI and RSB pinmuxes
Samuel Holland
samuel at sholland.org
Fri Nov 18 05:13:17 CET 2022
P2WI and RSB are used to communicate with a PMIC. Most SoCs have only
one possible pinmux. F1C100s has two possibilities, with different mux
values, so omit it until some board needs one of them.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 061104be056..716dd7b5815 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -338,6 +338,7 @@ static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
{ "s_i2c", 2 }, /* PL0-PL1 */
+ { "s_p2wi", 3 }, /* PL0-PL1 */
{ "s_uart", 2 }, /* PL2-PL3 */
};
@@ -404,6 +405,7 @@ static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
{ "s_i2c", 3 }, /* PL0-PL1 */
+ { "s_rsb", 2 }, /* PL0-PL1 */
{ "s_uart", 2 }, /* PL2-PL3 */
};
@@ -469,6 +471,7 @@ static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
{ "s_i2c", 2 }, /* PL8-PL9 */
+ { "s_rsb", 2 }, /* PL0-PL1 */
{ "s_uart", 2 }, /* PL2-PL3 */
};
@@ -574,6 +577,7 @@ static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = {
{ "gpio_out", 1 },
{ "s_i2c0", 2 }, /* PN0-PN1 */
{ "s_i2c1", 3 }, /* PM8-PM9 */
+ { "s_rsb", 3 }, /* PL0-PL1 */
{ "s_uart", 3 }, /* PL0-PL1 */
};
@@ -615,6 +619,7 @@ static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
{ "s_i2c", 2 }, /* PL8-PL9 */
+ { "s_rsb", 2 }, /* PL0-PL1 */
{ "s_uart", 2 }, /* PL2-PL3 */
};
@@ -680,6 +685,7 @@ static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
{ "s_i2c", 3 }, /* PL0-PL1 */
+ { "s_rsb", 2 }, /* PL0-PL1 */
{ "s_uart", 2 }, /* PL2-PL3 */
};
@@ -717,6 +723,7 @@ static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = {
{ "gpio_in", 0 },
{ "gpio_out", 1 },
{ "s_i2c", 3 }, /* PL0-PL1 */
+ { "s_rsb", 2 }, /* PL0-PL1 */
{ "s_uart", 2 }, /* PL2-PL3 */
};
--
2.37.4
More information about the U-Boot
mailing list