[PATCH v2] pinctrl: sunxi: Add P2WI and RSB pinmuxes

Samuel Holland samuel at sholland.org
Fri Nov 18 05:22:27 CET 2022


P2WI and RSB are used to communicate with a PMIC. Most SoCs have only
one possible pinmux. F1C100s has two possibilities, with different mux
values, so omit it until some board needs one of them.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

Changes in v2:
 - Fix pin list comment for A80 entry

 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 061104be056..c4fbda7a925 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -338,6 +338,7 @@ static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = {
 	{ "gpio_in",	0 },
 	{ "gpio_out",	1 },
 	{ "s_i2c",	2 },	/* PL0-PL1 */
+	{ "s_p2wi",	3 },	/* PL0-PL1 */
 	{ "s_uart",	2 },	/* PL2-PL3 */
 };
 
@@ -404,6 +405,7 @@ static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = {
 	{ "gpio_in",	0 },
 	{ "gpio_out",	1 },
 	{ "s_i2c",	3 },	/* PL0-PL1 */
+	{ "s_rsb",	2 },	/* PL0-PL1 */
 	{ "s_uart",	2 },	/* PL2-PL3 */
 };
 
@@ -469,6 +471,7 @@ static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = {
 	{ "gpio_in",	0 },
 	{ "gpio_out",	1 },
 	{ "s_i2c",	2 },	/* PL8-PL9 */
+	{ "s_rsb",	2 },	/* PL0-PL1 */
 	{ "s_uart",	2 },	/* PL2-PL3 */
 };
 
@@ -574,6 +577,7 @@ static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = {
 	{ "gpio_out",	1 },
 	{ "s_i2c0",	2 },	/* PN0-PN1 */
 	{ "s_i2c1",	3 },	/* PM8-PM9 */
+	{ "s_rsb",	3 },	/* PN0-PN1 */
 	{ "s_uart",	3 },	/* PL0-PL1 */
 };
 
@@ -615,6 +619,7 @@ static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = {
 	{ "gpio_in",	0 },
 	{ "gpio_out",	1 },
 	{ "s_i2c",	2 },	/* PL8-PL9 */
+	{ "s_rsb",	2 },	/* PL0-PL1 */
 	{ "s_uart",	2 },	/* PL2-PL3 */
 };
 
@@ -680,6 +685,7 @@ static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = {
 	{ "gpio_in",	0 },
 	{ "gpio_out",	1 },
 	{ "s_i2c",	3 },	/* PL0-PL1 */
+	{ "s_rsb",	2 },	/* PL0-PL1 */
 	{ "s_uart",	2 },	/* PL2-PL3 */
 };
 
@@ -717,6 +723,7 @@ static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = {
 	{ "gpio_in",	0 },
 	{ "gpio_out",	1 },
 	{ "s_i2c",	3 },	/* PL0-PL1 */
+	{ "s_rsb",	2 },	/* PL0-PL1 */
 	{ "s_uart",	2 },	/* PL2-PL3 */
 };
 
-- 
2.37.4



More information about the U-Boot mailing list