[PATCH v4 8/8] board: gw_ventana: enable MV88E61XX DSA support

[Fabio Estevam]

Hi Tim,

On Mon, Oct 3, 2022 at 9:23 PM Tim Harvey <tharvey at gateworks.com> wrote:

> Where are you setting your active port? By default eth0 is active and
> thats the cpu uplink. If you have a network connection on lan3 port
> you would need to 'setenv ethact lan3'.

It works now: both 'dhcp' and 'tftp' commands are functional.

Thanks a lot for your work on this and for your help!

If you send a v5 with the CONFIG_MV88E6XXX=y typo fixed,
feel free to add for the whole series:

Reviewed-by: Fabio Estevam <festevam at denx.de>