[PATCH 6/6] sunxi: add CherryPi-F1C200s support

[Jesse Taube]

On 10/13/22 05:53, Andre Przywara wrote:
> On 13/10/2022 09:33, Clément Péron wrote:
> 
> Hi Clément,
> 
>> On Wed, 12 Oct 2022 at 18:35, Andre Przywara <andre.przywara at arm.com> wrote:
>>>
>>> The CherryPi F1C200s board is a small development board, featuring the
>>> F1C200s with 64MB of co-packaged DRAM. It comes with two USB-C sockets,
>>> of which one is connected to a USB-UART chip, that provides easy access
>>> to UART1.
>>
>> A similar board is trying to been upstreamed by Icenowy:
>>
>> see : https://lore.kernel.org/lkml/20221012055602.1544944-11-uwu@icenowy.me/
>> [PATCH v2 10/10] ARM: dts: suniv: add device tree for PopStick v1.1
>>
>> Maybe we should take into account the remarks that Krzysztof Kozlowski
>> made to follow the same device-tree rules on U-boot.
> 
> Yeah, thanks for the heads up, I saw that. I just wanted to post this to
> demonstrate what needs to be done. I will be sending a Linux DT patch
> anyway, since DTs need to go via Linux anyway.
> 
> Thanks,
> Andre
> 
>>
>> Regards,
>> Clement
>>
>>> Beside the usual micro-SD card slot, the board comes with a SPI NAND
>>> flash chip, which is not yet supported.
>>>
>>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>>> ---
>>>    .../dts/suniv-f1c100s-cherrypi-f1c200s.dts    | 45 +++++++++++++++++++
>>>    configs/cherrypi_f1c200s_defconfig            | 11 +++++
>>>    2 files changed, 56 insertions(+)
>>>    create mode 100644 arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
>>>    create mode 100644 configs/cherrypi_f1c200s_defconfig
>>>
>>> diff --git a/arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts b/arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
>>> new file mode 100644
>>> index 00000000000..f0ebcb6d893
>>> --- /dev/null
>>> +++ b/arch/arm/dts/suniv-f1c100s-cherrypi-f1c200s.dts
>>> @@ -0,0 +1,45 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR X11)
>>> +/*
>>> + * Copyright 2022 Arm Ltd.
>>> + * based on another DT, which is:
>>> + *   Copyright 2018 Icenowy Zheng <icenowy at aosc.io>
Her email changed IDK if it is proper to change here.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "suniv-f1c100s.dtsi"
>>> +
>>> +/ {
>>> +       model = "Cherry Pi F1C200s";
>>> +       compatible = "lctech,cherrypi-f1c200s", "allwinner,suniv-f1c100s";
>>> +
>>> +       aliases {
>>> +               mmc0 = &mmc0;
>>> +               serial0 = &uart1;
>>> +               spi0 = &spi0;
no need for spi.
>>> +       };
>>> +
>>> +       chosen {
>>> +               stdout-path = "serial0:115200n8";
>>> +       };
>>> +
>>> +       reg_vcc3v3: vcc3v3 {
>>> +               compatible = "regulator-fixed";
>>> +               regulator-name = "vcc3v3";
>>> +               regulator-min-microvolt = <3300000>;
>>> +               regulator-max-microvolt = <3300000>;
>>> +       };
>>> +};
>>> +
>>> +&mmc0 {
>>> +       broken-cd;
>>> +       bus-width = <4>;
>>> +       disable-wp;
>>> +       status = "okay";
>>> +       vmmc-supply = <&reg_vcc3v3>;
>>> +};
>>> +
>>> +&uart1 {
>>> +       pinctrl-names = "default";
>>> +       pinctrl-0 = <&uart1_pa_pins>;
>>> +       status = "okay";
>>> +};
>>> diff --git a/configs/cherrypi_f1c200s_defconfig b/configs/cherrypi_f1c200s_defconfig
>>> new file mode 100644
>>> index 00000000000..306d363f485
>>> --- /dev/null
>>> +++ b/configs/cherrypi_f1c200s_defconfig
>>> @@ -0,0 +1,11 @@
>>> +CONFIG_ARM=y
>>> +CONFIG_SYS_DCACHE_OFF=y
>>> +CONFIG_ARCH_SUNXI=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-cherrypi-f1c200s"
>>> +CONFIG_SPL=y
>>> +CONFIG_MACH_SUNIV=y
>>> +CONFIG_DRAM_CLK=156
>>> +CONFIG_DRAM_ZQ=0
You need
+CONFIG_SPL_STACK=0x8000

I will test this on both 100s and 200s.
Thanks,
Jesse Taube
>>> +CONFIG_SUNXI_MINIMUM_DRAM_MB=64
>>> +# CONFIG_VIDEO_SUNXI is not set
>>> +CONFIG_CONS_INDEX=2
>>> --
>>> 2.25.1
>>>
>>>
>