[PATCH v2 3/3] arm: dts: rockchip: rk3288: partial sync from Linux
Kever Yang
kever.yang at rock-chips.com
Mon Oct 17 14:56:21 CEST 2022
On 2022/9/28 22:24, Johan Jonker wrote:
> Partial sync of rk3288.dtsi from Linux version 5.18
>
> Changed:
> only properties and functions that are not yet included
> swap some clocks positions
> fix some irq numbers
> style and sort nodes
>
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
>
> Changed V2:
> rebase
> ---
> arch/arm/dts/rk3288-veyron-jerry.dts | 6 -
> arch/arm/dts/rk3288-veyron.dtsi | 4 -
> arch/arm/dts/rk3288.dtsi | 352 ++++++++++++++++++++++-----
> 3 files changed, 296 insertions(+), 66 deletions(-)
>
> diff --git a/arch/arm/dts/rk3288-veyron-jerry.dts b/arch/arm/dts/rk3288-veyron-jerry.dts
> index ff7669eb..40fee55c 100644
> --- a/arch/arm/dts/rk3288-veyron-jerry.dts
> +++ b/arch/arm/dts/rk3288-veyron-jerry.dts
> @@ -137,12 +137,6 @@
> };
> };
>
> - edp {
> - edp_hpd: edp_hpd {
> - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
> - };
> - };
> -
> emmc {
> /* Make sure eMMC is not in reset */
> emmc_deassert_reset: emmc-deassert-reset {
> diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
> index 4a9c27a4..35db8827 100644
> --- a/arch/arm/dts/rk3288-veyron.dtsi
> +++ b/arch/arm/dts/rk3288-veyron.dtsi
> @@ -560,10 +560,6 @@
> status = "okay";
> };
>
> -&hdmi_audio {
> - status = "okay";
> -};
> -
> &gpu {
> status = "okay";
> };
> diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
> index f473691c..8c394c1e 100644
> --- a/arch/arm/dts/rk3288.dtsi
> +++ b/arch/arm/dts/rk3288.dtsi
> @@ -15,6 +15,7 @@
>
> interrupt-parent = <&gic>;
> aliases {
> + ethernet0 = &gmac;
> i2c0 = &i2c0;
> i2c1 = &i2c1;
> i2c2 = &i2c2;
> @@ -35,6 +36,15 @@
> spi2 = &spi2;
> };
>
> + arm-pmu {
> + compatible = "arm,cortex-a12-pmu";
> + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -141,6 +151,26 @@
> };
> };
>
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + /*
> + * The rk3288 cannot use the memory area above 0xfe000000
> + * for dma operations for some reason. While there is
> + * probably a better solution available somewhere, we
> + * haven't found it yet and while devices with 2GB of ram
> + * are not affected, this issue prevents 4GB from booting.
> + * So to make these devices at least bootable, block
> + * this area for the time being until the real solution
> + * is found.
> + */
> + dma-unusable at fe000000 {
> + reg = <0xfe000000 0x1000000>;
> + };
> + };
> +
> xin24m: oscillator {
> compatible = "fixed-clock";
> clock-frequency = <24000000>;
> @@ -149,14 +179,22 @@
> };
>
> timer {
> - arm,use-physical-timer;
> compatible = "arm,armv7-timer";
> + arm,cpu-registers-not-fw-configured;
> interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> clock-frequency = <24000000>;
> - always-on;
> + arm,no-tick-in-suspend;
> + };
> +
> + timer: timer at ff810000 {
> + compatible = "rockchip,rk3288-timer";
> + reg = <0x0 0xff810000 0x0 0x20>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_TIMER>, <&xin24m>;
> + clock-names = "pclk", "timer";
> };
>
> display-subsystem {
> @@ -173,6 +211,8 @@
> fifo-depth = <0x100>;
> interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xff0c0000 0x4000>;
> + resets = <&cru SRST_MMC0>;
> + reset-names = "reset";
> status = "disabled";
> };
>
> @@ -185,6 +225,8 @@
> fifo-depth = <0x100>;
> interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xff0d0000 0x4000>;
> + resets = <&cru SRST_SDIO0>;
> + reset-names = "reset";
> status = "disabled";
> };
>
> @@ -197,6 +239,8 @@
> fifo-depth = <0x100>;
> interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xff0e0000 0x4000>;
> + resets = <&cru SRST_SDIO1>;
> + reset-names = "reset";
> status = "disabled";
> };
>
> @@ -209,6 +253,8 @@
> fifo-depth = <0x100>;
> interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xff0f0000 0x4000>;
> + resets = <&cru SRST_EMMC>;
> + reset-names = "reset";
> status = "disabled";
> };
>
> @@ -219,6 +265,8 @@
> #io-channel-cells = <1>;
> clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
> clock-names = "saradc", "apb_pclk";
> + resets = <&cru SRST_SARADC>;
> + reset-names = "saradc-apb";
> status = "disabled";
> };
>
> @@ -318,6 +366,7 @@
> pinctrl-0 = <&i2c5_xfer>;
> status = "disabled";
> };
> +
> uart0: serial at ff180000 {
> compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
> reg = <0xff180000 0x100>;
> @@ -326,6 +375,8 @@
> reg-io-width = <4>;
> clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
> clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac_peri 1>, <&dmac_peri 2>;
> + dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_xfer>;
> status = "disabled";
> @@ -339,6 +390,8 @@
> reg-io-width = <4>;
> clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac_peri 3>, <&dmac_peri 4>;
> + dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&uart1_xfer>;
> status = "disabled";
> @@ -356,6 +409,7 @@
> pinctrl-0 = <&uart2_xfer>;
> status = "disabled";
> };
> +
> uart3: serial at ff1b0000 {
> compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
> reg = <0xff1b0000 0x100>;
> @@ -364,6 +418,8 @@
> reg-io-width = <4>;
> clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
> clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac_peri 7>, <&dmac_peri 8>;
> + dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&uart3_xfer>;
> status = "disabled";
> @@ -377,6 +433,8 @@
> reg-io-width = <4>;
> clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
> clock-names = "baudclk", "apb_pclk";
> + dmas = <&dmac_peri 9>, <&dmac_peri 10>;
> + dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&uart4_xfer>;
> status = "disabled";
> @@ -388,7 +446,8 @@
> interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> #dma-cells = <1>;
> - broken-no-flushp;
> + arm,pl330-broken-no-flushp;
> + arm,pl330-periph-burst;
> clocks = <&cru ACLK_DMAC2>;
> clock-names = "apb_pclk";
> };
> @@ -503,6 +562,8 @@
> "mac_clk_rx", "mac_clk_tx",
> "clk_mac_ref", "clk_mac_refout",
> "aclk_mac", "pclk_mac";
> + resets = <&cru SRST_MAC>;
> + reset-names = "stmmaceth";
> };
>
> usb_host0_ehci: usb at ff500000 {
> @@ -516,7 +577,7 @@
> status = "disabled";
> };
>
> - /* NOTE: doesn't work on RK3288, but fixed on RK3288W */
> + /* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
> usb_host0_ohci: usb at ff520000 {
> compatible = "generic-ohci";
> reg = <0x0 0xff520000 0x0 0x100>;
> @@ -534,8 +595,10 @@
> interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru HCLK_USBHOST1>;
> clock-names = "otg";
> + dr_mode = "host";
> phys = <&usbphy2>;
> phy-names = "usb2-phy";
> + snps,reset-phy-on-wake;
> status = "disabled";
> };
>
> @@ -547,6 +610,9 @@
> clocks = <&cru HCLK_OTG0>;
> clock-names = "otg";
> dr_mode = "otg";
> + g-np-tx-fifo-size = <16>;
> + g-rx-fifo-size = <275>;
> + g-tx-fifo-size = <256 128 128 64 64 32>;
> phys = <&usbphy0>;
> phy-names = "usb2-phy";
> status = "disabled";
> @@ -567,7 +633,8 @@
> interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> #dma-cells = <1>;
> - broken-no-flushp;
> + arm,pl330-broken-no-flushp;
> + arm,pl330-periph-burst;
> clocks = <&cru ACLK_DMAC1>;
> clock-names = "apb_pclk";
> status = "disabled";
> @@ -647,7 +714,7 @@
> status = "disabled";
> };
>
> - bus_intmem: bus_intmem at ff700000 {
> + bus_intmem: sram at ff700000 {
> compatible = "mmio-sram";
> reg = <0xff700000 0x18000>;
> #address-cells = <1>;
> @@ -659,7 +726,7 @@
> };
> };
>
> - sram at ff720000 {
> + pmu_sram: sram at ff720000 {
> compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
> reg = <0xff720000 0x1000>;
> };
> @@ -701,7 +768,7 @@
> compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
> reg = <0xff800000 0x100>;
> clocks = <&cru PCLK_WDT>;
> - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
>
> @@ -709,11 +776,11 @@
> compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
> reg = <0xff8b0000 0x10000>;
> #sound-dai-cells = <0>;
> - clock-names = "hclk", "mclk";
> - clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
> + clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
> + clock-names = "mclk", "hclk";
> dmas = <&dmac_bus_s 3>;
> dma-names = "tx";
> - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&spdif_tx>;
> rockchip,grf = <&grf>;
> @@ -723,50 +790,97 @@
> i2s: i2s at ff890000 {
> compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
> reg = <0xff890000 0x10000>;
> - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #sound-dai-cells = <1>;
> + #sound-dai-cells = <0>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
> + clock-names = "i2s_clk", "i2s_hclk";
> dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
> dma-names = "tx", "rx";
> - clock-names = "i2s_hclk", "i2s_clk";
> - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2s0_bus>;
> + rockchip,playback-channels = <8>;
> + rockchip,capture-channels = <2>;
> + status = "disabled";
> + };
> +
> + crypto: crypto at ff8a0000 {
> + compatible = "rockchip,rk3288-crypto";
> + reg = <0xff8a0000 0x4000>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> + <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> + clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> + resets = <&cru SRST_CRYPTO>;
> + reset-names = "crypto-rst";
> + };
> +
> + iep_mmu: iommu at ff900800 {
> + compatible = "rockchip,iommu";
> + reg = <0xff900800 0x40>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
> + clock-names = "aclk", "iface";
> + #iommu-cells = <0>;
> status = "disabled";
> };
>
> + isp_mmu: iommu at ff914000 {
> + compatible = "rockchip,iommu";
> + reg = <0xff914000 0x100>, <0xff915000 0x100>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
> + clock-names = "aclk", "iface";
> + #iommu-cells = <0>;
> + rockchip,disable-mmu-reset;
> + status = "disabled";
> + };
> +
> + rga: rga at ff920000 {
> + compatible = "rockchip,rk3288-rga";
> + reg = <0xff920000 0x180>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
> + clock-names = "aclk", "hclk", "sclk";
> + power-domains = <&power RK3288_PD_VIO>;
> + resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
> + reset-names = "core", "axi", "ahb";
> + };
> +
> vopb: vop at ff930000 {
> compatible = "rockchip,rk3288-vop";
> reg = <0xff930000 0x19c>;
> interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
> clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + power-domains = <&power RK3288_PD_VIO>;
> resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
> reset-names = "axi", "ahb", "dclk";
> iommus = <&vopb_mmu>;
> - power-domains = <&power RK3288_PD_VIO>;
> status = "disabled";
> +
> vopb_out: port {
> #address-cells = <1>;
> #size-cells = <0>;
> +
> vopb_out_edp: endpoint at 0 {
> reg = <0>;
> remote-endpoint = <&edp_in_vopb>;
> };
> +
> vopb_out_hdmi: endpoint at 1 {
> reg = <1>;
> remote-endpoint = <&hdmi_in_vopb>;
> };
> +
> vopb_out_lvds: endpoint at 2 {
> reg = <2>;
> remote-endpoint = <&lvds_in_vopb>;
> };
> +
> vopb_out_mipi: endpoint at 3 {
> reg = <3>;
> remote-endpoint = <&mipi_in_vopb>;
> };
> -
> };
> };
>
> @@ -774,7 +888,8 @@
> compatible = "rockchip,iommu";
> reg = <0xff930300 0x100>;
> interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "vopb_mmu";
> + clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
> + clock-names = "aclk", "iface";
> power-domains = <&power RK3288_PD_VIO>;
> #iommu-cells = <0>;
> status = "disabled";
> @@ -786,31 +901,35 @@
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
> clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + power-domains = <&power RK3288_PD_VIO>;
> resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
> reset-names = "axi", "ahb", "dclk";
> iommus = <&vopl_mmu>;
> - power-domains = <&power RK3288_PD_VIO>;
> status = "disabled";
> +
> vopl_out: port {
> #address-cells = <1>;
> #size-cells = <0>;
> +
> vopl_out_edp: endpoint at 0 {
> reg = <0>;
> remote-endpoint = <&edp_in_vopl>;
> };
> +
> vopl_out_hdmi: endpoint at 1 {
> reg = <1>;
> remote-endpoint = <&hdmi_in_vopl>;
> };
> +
> vopl_out_lvds: endpoint at 2 {
> reg = <2>;
> remote-endpoint = <&lvds_in_vopl>;
> };
> +
> vopl_out_mipi: endpoint at 3 {
> reg = <3>;
> remote-endpoint = <&mipi_in_vopl>;
> };
> -
> };
> };
>
> @@ -818,7 +937,8 @@
> compatible = "rockchip,iommu";
> reg = <0xff940300 0x100>;
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "vopl_mmu";
> + clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
> + clock-names = "aclk", "iface";
> power-domains = <&power RK3288_PD_VIO>;
> #iommu-cells = <0>;
> status = "disabled";
> @@ -827,16 +947,14 @@
> mipi_dsi: mipi at ff960000 {
> compatible = "rockchip,rk3288_mipi_dsi";
> reg = <0xff960000 0x4000>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_MIPI_DSI0>;
> clock-names = "pclk_mipi";
> - /*pinctrl-names = "default";
> - pinctrl-0 = <&lcdc0_ctl>;*/
> + power-domains = <&power RK3288_PD_VIO>;
> rockchip,grf = <&grf>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> status = "disabled";
> +
> ports {
> - reg = <1>;
> mipi_in: port {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -858,16 +976,21 @@
> clocks = <&cru PCLK_LVDS_PHY>;
> clock-names = "pclk_lvds";
> pinctrl-names = "default";
> - pinctrl-0 = <&lcdc0_ctl>;
> + pinctrl-0 = <&lcdc_ctl>;
> + power-domains = <&power RK3288_PD_VIO>;
> rockchip,grf = <&grf>;
> status = "disabled";
> +
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> +
> lvds_in: port at 0 {
> reg = <0>;
> +
> #address-cells = <1>;
> #size-cells = <0>;
> +
> lvds_in_vopb: endpoint at 0 {
> reg = <0>;
> remote-endpoint = <&vopb_out_lvds>;
> @@ -885,12 +1008,13 @@
> reg = <0xff970000 0x4000>;
> interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>;
> - rockchip,grf = <&grf>;
> clock-names = "clk_edp", "clk_edp_24m", "pclk_edp";
> - resets = <&cru 111>;
> + resets = <&cru SRST_EDP>;
> reset-names = "edp";
> + rockchip,grf = <&grf>;
> power-domains = <&power RK3288_PD_VIO>;
> status = "disabled";
> +
> ports {
> edp_in: port {
> #address-cells = <1>;
> @@ -911,12 +1035,14 @@
> compatible = "rockchip,rk3288-dw-hdmi";
> reg = <0xff980000 0x20000>;
> reg-io-width = <4>;
> - ddc-i2c-bus = <&i2c5>;
> + #sound-dai-cells = <0>;
> rockchip,grf = <&grf>;
> interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> clock-names = "iahb", "isfr";
> + power-domains = <&power RK3288_PD_VIO>;
> status = "disabled";
> +
> ports {
> hdmi_in: port {
> #address-cells = <1>;
> @@ -933,31 +1059,36 @@
> };
> };
>
> - hdmi_audio: hdmi_audio {
> - compatible = "rockchip,rk3288-hdmi-audio";
> - i2s-controller = <&i2s>;
> - status = "disable";
> - };
> -
> vpu: video-codec at ff9a0000 {
> compatible = "rockchip,rk3288-vpu";
> reg = <0xff9a0000 0x800>;
> interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "vepu", "vdpu";
> clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> - clock-names = "aclk_vcodec", "hclk_vcodec";
> - power-domains = <&power RK3288_PD_VIDEO>;
> + clock-names = "aclk", "hclk";
> iommus = <&vpu_mmu>;
> + power-domains = <&power RK3288_PD_VIDEO>;
> };
>
> vpu_mmu: iommu at ff9a0800 {
> compatible = "rockchip,iommu";
> reg = <0xff9a0800 0x100>;
> interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "vpu_mmu";
> + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> + clock-names = "aclk", "iface";
> + #iommu-cells = <0>;
> power-domains = <&power RK3288_PD_VIDEO>;
> + };
> +
> + hevc_mmu: iommu at ff9c0440 {
> + compatible = "rockchip,iommu";
> + reg = <0xff9c0440 0x40>, <0xff9c0480 0x40>;
> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
> + clock-names = "aclk", "iface";
> #iommu-cells = <0>;
> + status = "disabled";
> };
>
> gpu: gpu at ffa30000 {
> @@ -999,13 +1130,84 @@
> };
> };
>
> + qos_gpu_r: qos at ffaa0000 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffaa0000 0x20>;
> + };
> +
> + qos_gpu_w: qos at ffaa0080 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffaa0080 0x20>;
> + };
> +
> + qos_vio1_vop: qos at ffad0000 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0000 0x20>;
> + };
> +
> + qos_vio1_isp_w0: qos at ffad0100 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0100 0x20>;
> + };
> +
> + qos_vio1_isp_w1: qos at ffad0180 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0x0 0xffad0180 0x0 0x20>;
> + };
> +
> + qos_vio0_vop: qos at ffad0400 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0x0 0xffad0400 0x0 0x20>;
> + };
> +
> + qos_vio0_vip: qos at ffad0480 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0480 0x20>;
> + };
> +
> + qos_vio0_iep: qos at ffad0500 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0500 0x20>;
> + };
> +
> + qos_vio2_rga_r: qos at ffad0800 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0800 0x20>;
> + };
> +
> + qos_vio2_rga_w: qos at ffad0880 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0880 0x20>;
> + };
> +
> + qos_vio1_isp_r: qos at ffad0900 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffad0900 0x20>;
> + };
> +
> + qos_video: qos at ffae0000 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffae0000 0x20>;
> + };
> +
> + qos_hevc_r: qos at ffaf0000 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffaf0000 0x20>;
> + };
> +
> + qos_hevc_w: qos at ffaf0080 {
> + compatible = "rockchip,rk3288-qos", "syscon";
> + reg = <0xffaf0080 0x20>;
> + };
> +
> dmac_bus_s: dma-controller at ffb20000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0xffb20000 0x4000>;
> interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> #dma-cells = <1>;
> - broken-no-flushp;
> + arm,pl330-broken-no-flushp;
> + arm,pl330-periph-burst;
> clocks = <&cru ACLK_DMAC1>;
> clock-names = "apb_pclk";
> };
> @@ -1013,7 +1215,17 @@
> efuse: efuse at ffb40000 {
> compatible = "rockchip,rk3288-efuse";
> reg = <0xffb40000 0x10000>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + clocks = <&cru PCLK_EFUSE256>;
> + clock-names = "pclk_efuse";
> +
> + cpu_id: cpu-id at 7 {
> + reg = <0x07 0x10>;
> + };
> + cpu_leakage: cpu_leakage at 17 {
> + reg = <0x17 0x1>;
> + };
> };
>
> gic: interrupt-controller at ffc01000 {
> @@ -1072,7 +1284,7 @@
>
> gpio0: gpio0 at ff750000 {
> compatible = "rockchip,gpio-bank";
> - reg = <0xff750000 0x100>;
> + reg = <0xff750000 0x100>;
> interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru PCLK_GPIO0>;
>
> @@ -1191,6 +1403,24 @@
> hdmi_cec_c0: hdmi-cec-c0 {
> rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
> };
> +
> + hdmi_cec_c7: hdmi-cec-c7 {
> + rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>;
> + };
> +
> + hdmi_ddc: hdmi-ddc {
> + rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
> + <7 RK_PC4 2 &pcfg_pull_none>;
> + };
> +
> + hdmi_ddc_unwedge: hdmi-ddc-unwedge {
> + rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
> + <7 RK_PC4 2 &pcfg_pull_none>;
> + };
> + };
> +
> + pcfg_output_low: pcfg-output-low {
> + output-low;
> };
>
> pcfg_pull_up: pcfg-pull-up {
> @@ -1210,7 +1440,7 @@
> drive-strength = <12>;
> };
>
> - sleep {
> + suspend {
> global_pwroff: global-pwroff {
> rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
> };
> @@ -1228,6 +1458,12 @@
> };
> };
>
> + edp {
> + edp_hpd: edp-hpd {
> + rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>;
> + };
> + };
> +
> i2c0 {
> i2c0_xfer: i2c0-xfer {
> rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>,
> @@ -1281,8 +1517,8 @@
> };
> };
>
> - lcdc0 {
> - lcdc0_ctl: lcdc0-ctl {
> + lcdc {
> + lcdc_ctl: lcdc-ctl {
> rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
> <1 RK_PD1 1 &pcfg_pull_none>,
> <1 RK_PD2 1 &pcfg_pull_none>,
> @@ -1299,7 +1535,7 @@
> rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>;
> };
>
> - sdmmc_cd: sdmcc-cd {
> + sdmmc_cd: sdmmc-cd {
> rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>;
> };
>
> @@ -1490,7 +1726,7 @@
> };
>
> uart0_cts: uart0-cts {
> - rockchip,pins = <4 RK_PC2 1 &pcfg_pull_none>;
> + rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>;
> };
>
> uart0_rts: uart0-rts {
> @@ -1505,7 +1741,7 @@
> };
>
> uart1_cts: uart1-cts {
> - rockchip,pins = <5 RK_PB2 1 &pcfg_pull_none>;
> + rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>;
> };
>
> uart1_rts: uart1-rts {
> @@ -1528,7 +1764,7 @@
> };
>
> uart3_cts: uart3-cts {
> - rockchip,pins = <7 RK_PB1 1 &pcfg_pull_none>;
> + rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>;
> };
>
> uart3_rts: uart3-rts {
> @@ -1538,20 +1774,24 @@
>
> uart4 {
> uart4_xfer: uart4-xfer {
> - rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>,
> - <5 RK_PB5 3 &pcfg_pull_none>;
> + rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>,
> + <5 RK_PB6 3 &pcfg_pull_none>;
> };
>
> uart4_cts: uart4-cts {
> - rockchip,pins = <5 RK_PB6 3 &pcfg_pull_none>;
> + rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>;
> };
>
> uart4_rts: uart4-rts {
> - rockchip,pins = <5 RK_PB7 3 &pcfg_pull_none>;
> + rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>;
> };
> };
>
> tsadc {
> + otp_pin: otp-pin {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> otp_out: otp-out {
> rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>;
> };
More information about the U-Boot
mailing list