[PATCH 0/7] arm: dts: Create common imx8mn-u-boot

[Stefano Babic]

Hi Adam,

On 21.10.22 14:10, Adam Ford wrote:
> On Sun, Sep 11, 2022 at 11:36 AM Adam Ford <aford173 at gmail.com> wrote:
>>
>> On Mon, Aug 15, 2022 at 6:43 AM Adam Ford <aford173 at gmail.com> wrote:
>>>
>>> On Sun, Aug 14, 2022 at 5:57 PM Fabio Estevam <festevam at gmail.com> wrote:
>>>>
>>>> Hi Adam,
>>>>
>>>> On Sun, Jul 31, 2022 at 8:46 PM Adam Ford <aford173 at gmail.com> wrote:
>>>>>
>>>>> Every imx8mn board has a bunch of similar entries on their
>>>>> respective board-u-boot.dtsi file to make the board bootable.
>>>>> Instead of maintaining multiple files with duplicate code,
>>>>> have them all point to a new, common file.  This file includes
>>>>> the necessary nodes that were common to nearly all boards
>>>>> and added spba1 to help faciliate SPL_DM_SERIAL.  This also
>>>>> adds support for CONFIG_FSPI_CONF_HEADER which can be used
>>>>> to generate flash.bin files for booting from FlexSPI.
>>>>>
>>>>> Adam Ford (7):
>>>>>    arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi
>>>>>    arm: dts: imx8mn-beacon-kit: Consolidate with imx8mn-u-boot
>>>>>    arm: dts: imx8mn-bsh-smm-s2: Consolidate with imx8mn-u-boot
>>>>>    arm: dts: imx8mn-ddr4-evk: Consolidate with imx8mn-u-boot
>>>>>    arm: dts: imx8mn-evk: Consolidate with imx8mn-u-boot
>>>>>    arm: dts: imx8mn-var-som-symphony: Consolidate with imx8mn-u-boot
>>>>>    arm: dts: imx8mn-venice: Consolidate with imx8mn-u-boot
>>>>
>>>> For the series:
>>>>
>>>> Reviewed-by: Fabio Estevam <festevam at denx.de>
>>>
>>
>> Stefano,
>>
>> It's been over a month, and I haven't heard any feedback from you and
>> it doesn't appear this series has been accepted.  Without it, Nano
>> boards with DM_SERIAL in SPL won't' boot because of the device tree
>> change which moved the UART's into a subnode.  Are you able to apply
>> to this series?  As I mentioned before, I can squash the dependent
>> patch into this series and push a V2 if you want.  With a pending
>> release in a few weeks, it would be nice to have the Nano boards
>> booting again.
>>
>> thanks!
>>
>> adam
>>
>>> Thanks!
>>>
>>> Stefano,
>>>
>>> If you want me to squash the 1 dependent patch, I can squash it into
>>> this series and submit a V2, but getting this series applied should
>>> fix a bunch of boards which don't boot properly.
> 
> Stefano,
> 
> Gentle nudge on this series.  I posted it back in July and several
> people have responded with positive feedback.  Do you think it can be
> merged?
> 

I have applied a second bunch of patches, this will be in the third one. 
However, I have fixed a couple of small things during first merge. I 
cannot apply them clean, can you check and rebase on top of u-boot-imx ? 
Thanks !

Stefano

> thanks,
> 
> adam
> 
>>>
>>> adam

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================