[PATCH 0/7] arm: dts: Create common imx8mn-u-boot

Adam Ford aford173 at gmail.com
Fri Oct 21 14:28:36 CEST 2022


On Fri, Oct 21, 2022 at 7:27 AM Stefano Babic <sbabic at denx.de> wrote:
>
> Hi Adam,
>
> On 21.10.22 14:10, Adam Ford wrote:
> > On Sun, Sep 11, 2022 at 11:36 AM Adam Ford <aford173 at gmail.com> wrote:
> >>
> >> On Mon, Aug 15, 2022 at 6:43 AM Adam Ford <aford173 at gmail.com> wrote:
> >>>
> >>> On Sun, Aug 14, 2022 at 5:57 PM Fabio Estevam <festevam at gmail.com> wrote:
> >>>>
> >>>> Hi Adam,
> >>>>
> >>>> On Sun, Jul 31, 2022 at 8:46 PM Adam Ford <aford173 at gmail.com> wrote:
> >>>>>
> >>>>> Every imx8mn board has a bunch of similar entries on their
> >>>>> respective board-u-boot.dtsi file to make the board bootable.
> >>>>> Instead of maintaining multiple files with duplicate code,
> >>>>> have them all point to a new, common file.  This file includes
> >>>>> the necessary nodes that were common to nearly all boards
> >>>>> and added spba1 to help faciliate SPL_DM_SERIAL.  This also
> >>>>> adds support for CONFIG_FSPI_CONF_HEADER which can be used
> >>>>> to generate flash.bin files for booting from FlexSPI.
> >>>>>
> >>>>> Adam Ford (7):
> >>>>>    arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi
> >>>>>    arm: dts: imx8mn-beacon-kit: Consolidate with imx8mn-u-boot
> >>>>>    arm: dts: imx8mn-bsh-smm-s2: Consolidate with imx8mn-u-boot
> >>>>>    arm: dts: imx8mn-ddr4-evk: Consolidate with imx8mn-u-boot
> >>>>>    arm: dts: imx8mn-evk: Consolidate with imx8mn-u-boot
> >>>>>    arm: dts: imx8mn-var-som-symphony: Consolidate with imx8mn-u-boot
> >>>>>    arm: dts: imx8mn-venice: Consolidate with imx8mn-u-boot
> >>>>
> >>>> For the series:
> >>>>
> >>>> Reviewed-by: Fabio Estevam <festevam at denx.de>
> >>>
> >>
> >> Stefano,
> >>
> >> It's been over a month, and I haven't heard any feedback from you and
> >> it doesn't appear this series has been accepted.  Without it, Nano
> >> boards with DM_SERIAL in SPL won't' boot because of the device tree
> >> change which moved the UART's into a subnode.  Are you able to apply
> >> to this series?  As I mentioned before, I can squash the dependent
> >> patch into this series and push a V2 if you want.  With a pending
> >> release in a few weeks, it would be nice to have the Nano boards
> >> booting again.
> >>
> >> thanks!
> >>
> >> adam
> >>
> >>> Thanks!
> >>>
> >>> Stefano,
> >>>
> >>> If you want me to squash the 1 dependent patch, I can squash it into
> >>> this series and submit a V2, but getting this series applied should
> >>> fix a bunch of boards which don't boot properly.
> >
> > Stefano,
> >
> > Gentle nudge on this series.  I posted it back in July and several
> > people have responded with positive feedback.  Do you think it can be
> > merged?
> >
>
> I have applied a second bunch of patches, this will be in the third one.
> However, I have fixed a couple of small things during first merge. I
> cannot apply them clean, can you check and rebase on top of u-boot-imx ?
> Thanks !

Yes, I'll send out a V2 rebased this afternoon

adam
>
> Stefano
>
> > thanks,
> >
> > adam
> >
> >>>
> >>> adam
>
> --
> =====================================================================
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> =====================================================================
>


More information about the U-Boot mailing list