[PATCH 0/7] arm: dts: Create common imx8mn-u-boot

[Stefano Babic]

On 21.10.22 14:28, Adam Ford wrote:
> On Fri, Oct 21, 2022 at 7:27 AM Stefano Babic <sbabic at denx.de> wrote:
>>
>> Hi Adam,
>>
>> On 21.10.22 14:10, Adam Ford wrote:
>>> On Sun, Sep 11, 2022 at 11:36 AM Adam Ford <aford173 at gmail.com> wrote:
>>>>
>>>> On Mon, Aug 15, 2022 at 6:43 AM Adam Ford <aford173 at gmail.com> wrote:
>>>>>
>>>>> On Sun, Aug 14, 2022 at 5:57 PM Fabio Estevam <festevam at gmail.com> wrote:
>>>>>>
>>>>>> Hi Adam,
>>>>>>
>>>>>> On Sun, Jul 31, 2022 at 8:46 PM Adam Ford <aford173 at gmail.com> wrote:
>>>>>>>
>>>>>>> Every imx8mn board has a bunch of similar entries on their
>>>>>>> respective board-u-boot.dtsi file to make the board bootable.
>>>>>>> Instead of maintaining multiple files with duplicate code,
>>>>>>> have them all point to a new, common file.  This file includes
>>>>>>> the necessary nodes that were common to nearly all boards
>>>>>>> and added spba1 to help faciliate SPL_DM_SERIAL.  This also
>>>>>>> adds support for CONFIG_FSPI_CONF_HEADER which can be used
>>>>>>> to generate flash.bin files for booting from FlexSPI.
>>>>>>>
>>>>>>> Adam Ford (7):
>>>>>>>     arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi
>>>>>>>     arm: dts: imx8mn-beacon-kit: Consolidate with imx8mn-u-boot
>>>>>>>     arm: dts: imx8mn-bsh-smm-s2: Consolidate with imx8mn-u-boot
>>>>>>>     arm: dts: imx8mn-ddr4-evk: Consolidate with imx8mn-u-boot
>>>>>>>     arm: dts: imx8mn-evk: Consolidate with imx8mn-u-boot
>>>>>>>     arm: dts: imx8mn-var-som-symphony: Consolidate with imx8mn-u-boot
>>>>>>>     arm: dts: imx8mn-venice: Consolidate with imx8mn-u-boot
>>>>>>
>>>>>> For the series:
>>>>>>
>>>>>> Reviewed-by: Fabio Estevam <festevam at denx.de>
>>>>>
>>>>
>>>> Stefano,
>>>>
>>>> It's been over a month, and I haven't heard any feedback from you and
>>>> it doesn't appear this series has been accepted.  Without it, Nano
>>>> boards with DM_SERIAL in SPL won't' boot because of the device tree
>>>> change which moved the UART's into a subnode.  Are you able to apply
>>>> to this series?  As I mentioned before, I can squash the dependent
>>>> patch into this series and push a V2 if you want.  With a pending
>>>> release in a few weeks, it would be nice to have the Nano boards
>>>> booting again.
>>>>
>>>> thanks!
>>>>
>>>> adam
>>>>
>>>>> Thanks!
>>>>>
>>>>> Stefano,
>>>>>
>>>>> If you want me to squash the 1 dependent patch, I can squash it into
>>>>> this series and submit a V2, but getting this series applied should
>>>>> fix a bunch of boards which don't boot properly.
>>>
>>> Stefano,
>>>
>>> Gentle nudge on this series.  I posted it back in July and several
>>> people have responded with positive feedback.  Do you think it can be
>>> merged?
>>>
>>
>> I have applied a second bunch of patches, this will be in the third one.
>> However, I have fixed a couple of small things during first merge. I
>> cannot apply them clean, can you check and rebase on top of u-boot-imx ?
>> Thanks !
> 
> Yes, I'll send out a V2 rebased this afternoon

Thanks, CI is testing.

Stefano

> 
> adam
>>
>> Stefano
>>
>>> thanks,
>>>
>>> adam
>>>
>>>>>
>>>>> adam
>>
>> --
>> =====================================================================
>> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
>> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>> =====================================================================
>>

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================