[PATCH v2 3/8] imxrt1050: synchronise device tree with linux
Marcel Ziswiler
marcel.ziswiler at toradex.com
Sat Oct 22 14:57:50 CEST 2022
Hi Jesse
Sorry, I kinda missed your reply and imx maintainership was quiet for quite some time. I am now preparing a v3
taking your feedback into account. Thanks!
On Sun, 2022-08-28 at 02:50 -0400, Jesse Taube wrote:
>
>
> On 8/26/22 14:31, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> >
> > Synchronise device tree with linux v6.0-rc1.
> >
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> >
> > ---
> >
> > Changes in v2:
> > - imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
> >
> > arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 155 ++++++++++--
> > arch/arm/dts/imxrt1050-evk.dts | 257 +++-----------------
> > arch/arm/dts/imxrt1050-pinfunc.h | 2 +-
> > arch/arm/dts/imxrt1050.dtsi | 168 ++++++-------
> > include/dt-bindings/clock/imxrt1050-clock.h | 9 +-
> > 5 files changed, 248 insertions(+), 343 deletions(-)
> >
> > diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> > index 617cece448a..7db53b19c2f 100644
> > --- a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> > +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> > @@ -4,6 +4,8 @@
> > * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> > */
> >
> > +#include <dt-bindings/memory/imxrt-sdram.h>
> > +
> #include "imxrt1050-pinfunc.h"
Okay.
> > / {
> > chosen {
> > u-boot,dm-spl;
> diff says `tick-timer = &gpt;` its important for boot
Okay.
> > @@ -15,6 +17,52 @@
> >
> > soc {
> > u-boot,dm-spl;
> > +
> > + semc at 402f0000 {
> > + compatible = "fsl,imxrt-semc";
> > + clocks = <&clks IMXRT1050_CLK_SEMC>;
> > + pinctrl-0 = <&pinctrl_semc>;
> > + pinctrl-names = "default";
> > + reg = <0x402f0000 0x4000>;
> > + status = "okay";
> > + u-boot,dm-spl;
> I dont think this part under should go here tell me if im wrong. It
> should be move outside as a reference.
Not sure what you mean as this is the U-Boot specific device tree include file after all.
> > + /*
> > + * Memory configuration from sdram datasheet IS42S16160J-6BLI
> > + */
> > + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
> > + MUX_CSX0_SDRAM_CS1
> > + 0
> > + 0
> > + 0
> > + 0>;
> > + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
> > + BL_8
> > + COL_9BITS
> > + CL_3>;
> > + fsl,sdram-timing = /bits/ 8 <0x2
> > + 0x2
> > + 0x9
> > + 0x1
> > + 0x5
> > + 0x6
> > +
> > + 0x20
> > + 0x09
> > + 0x01
> > + 0x00
> > +
> > + 0x04
> > + 0x0A
> > + 0x21
> > + 0x50>;
> > +
> > + bank1: bank at 0 {
> > + fsl,base-address = <0x80000000>;
> > + fsl,memory-size = <MEM_SIZE_32M>;
> > + u-boot,dm-spl;
> > + };
> > + };
> > };
> > };
> >
> > @@ -50,7 +98,7 @@
> > u-boot,dm-spl;
> > };
> >
> > -&gpt1 {
> > +&gpt {
> Add diff:
> clocks = <&osc>;
> compatible = "fsl,imxrt-gpt";
> status = "okay";
Okay.
> > u-boot,dm-spl;
> > };
> >
> > @@ -58,33 +106,108 @@
> > u-boot,dm-spl;
> > };
> >
> > -&semc {
> > - u-boot,dm-spl;
> > -
> > - bank1: bank at 0 {
> > - u-boot,dm-spl;
> > - };
> > -};
> > -
> > &iomuxc {
> > u-boot,dm-spl;
> >
> > imxrt1050-evk {drop unneeded node ^^^
> > u-boot,dm-spl;
> > - pinctrl_lpuart1: lpuart1grp {
> > - u-boot,dm-spl;
> > - };
> >
> > pinctrl_semc: semcgrp {
> > - u-boot,dm-spl;
> > - };
> > -
> > - pinctrl_usdhc0: usdhc0grp {
> > + fsl,pins = <
> > + MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
> > + 0xf1 /* SEMC_D0 */
> > + MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
> > + 0xf1 /* SEMC_D1 */
> > + MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
> > + 0xf1 /* SEMC_D2 */
> > + MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
> > + 0xf1 /* SEMC_D3 */
> > + MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
> > + 0xf1 /* SEMC_D4 */
> > + MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
> > + 0xf1 /* SEMC_D5 */
> > + MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
> > + 0xf1 /* SEMC_D6 */
> > + MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
> > + 0xf1 /* SEMC_D7 */
> > + MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
> > + 0xf1 /* SEMC_DM0 */
> > + MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
> > + 0xf1 /* SEMC_A0 */
> > + MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
> > + 0xf1 /* SEMC_A1 */
> > + MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
> > + 0xf1 /* SEMC_A2 */
> > + MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
> > + 0xf1 /* SEMC_A3 */
> > + MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
> > + 0xf1 /* SEMC_A4 */
> > + MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
> > + 0xf1 /* SEMC_A5 */
> > + MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
> > + 0xf1 /* SEMC_A6 */
> > + MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
> > + 0xf1 /* SEMC_A7 */
> > + MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
> > + 0xf1 /* SEMC_A8 */
> > + MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
> > + 0xf1 /* SEMC_A9 */
> > + MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
> > + 0xf1 /* SEMC_A11 */
> > + MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
> > + 0xf1 /* SEMC_A12 */
> > + MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
> > + 0xf1 /* SEMC_BA0 */
> > + MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
> > + 0xf1 /* SEMC_BA1 */
> > + MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
> > + 0xf1 /* SEMC_A10 */
> > + MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
> > + 0xf1 /* SEMC_CAS */
> > + MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
> > + 0xf1 /* SEMC_RAS */
> > + MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
> > + 0xf1 /* SEMC_CLK */
> > + MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
> > + 0xf1 /* SEMC_CKE */
> > + MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
> > + 0xf1 /* SEMC_WE */
> > + MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
> > + 0xf1 /* SEMC_CS0 */
> > + MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
> > + 0xf1 /* SEMC_D8 */
> > + MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
> > + 0xf1 /* SEMC_D9 */
> > + MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
> > + 0xf1 /* SEMC_D10 */
> > + MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
> > + 0xf1 /* SEMC_D11 */
> > + MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
> > + 0xf1 /* SEMC_D12 */
> > + MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
> > + 0xf1 /* SEMC_D13 */
> > + MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
> > + 0xf1 /* SEMC_D14 */
> > + MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
> > + 0xf1 /* SEMC_D15 */
> > + MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
> > + 0xf1 /* SEMC_DM1 */
> > + MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
> > + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
> > + >;
> > u-boot,dm-spl;
> > };
> > };
> > };
> >
> > +&pinctrl_lpuart1 {
> Add diff:
> compatible = "fsl,imxrt-lpuart";
You probably meant that to go under the lpuart1 node but I got your point.
> > + u-boot,dm-spl;
> > +};
> > +
> > +&pinctrl_usdhc0 {
> Add diff:
> compatible = "fsl,imxrt-usdhc";
And this under the usdhc1 one.
> I tested this
> https://github.com/Mr-Bossman/u-boot/commit/42a7f430d761bb4d44f646a27649deda15352f2e
That commit seems totally different from any of this series. Not sure.
> Some note for future, check if the compatibles are the same they arent
> here so the soc.dtsi will be broken. Also wait a bit for other people to
> resopnd to patches before sending out v2 because no one commented on the
> other patches yet.
Sure, sure.
Cheers
Marcel
> Thanks,
> Jesse
> > + u-boot,dm-spl;
> > +};
> > +
> > &usdhc1 {
> > u-boot,dm-spl;
> > };
> > diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts
> > index fb2da3adfcf..6a9c10decf5 100644
> > --- a/arch/arm/dts/imxrt1050-evk.dts
> > +++ b/arch/arm/dts/imxrt1050-evk.dts
> > @@ -1,4 +1,4 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > /*
> > * Copyright (C) 2019
> > * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> > @@ -6,7 +6,6 @@
> >
> > /dts-v1/;
> > #include "imxrt1050.dtsi"
> > -#include "imxrt1050-evk-u-boot.dtsi"
> > #include "imxrt1050-pinfunc.h"
> >
> > / {
> > @@ -14,210 +13,52 @@
> > compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
> >
> > chosen {
> > - bootargs = "root=/dev/ram";
> > - stdout-path = "serial0:115200n8";
> > - tick-timer = &gpt1;
> > + stdout-path = &lpuart1;
> > };
> >
> > - memory {
> > + aliases {
> > + gpio0 = &gpio1;
> > + gpio1 = &gpio2;
> > + gpio2 = &gpio3;
> > + gpio3 = &gpio4;
> > + gpio4 = &gpio5;
> > + mmc0 = &usdhc1;
> > + serial0 = &lpuart1;
> > + };
> > +
> > + memory at 80000000 {
> > device_type = "memory";
> > reg = <0x80000000 0x2000000>;
> > };
> > };
> >
> > -&lpuart1 { /* console */
> > +&lpuart1 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_lpuart1>;
> > status = "okay";
> > };
> >
> > -&semc {
> > - /*
> > - * Memory configuration from sdram datasheet IS42S16160J-6BLI
> > - */
> > - fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
> > - MUX_CSX0_SDRAM_CS1
> > - 0
> > - 0
> > - 0
> > - 0>;
> > - fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
> > - BL_8
> > - COL_9BITS
> > - CL_3>;
> > - fsl,sdram-timing = /bits/ 8 <0x2
> > - 0x2
> > - 0x9
> > - 0x1
> > - 0x5
> > - 0x6
> > -
> > - 0x20
> > - 0x09
> > - 0x01
> > - 0x00
> > -
> > - 0x04
> > - 0x0A
> > - 0x21
> > - 0x50>;
> > -
> > - bank1: bank at 0 {
> > - fsl,base-address = <0x80000000>;
> > - fsl,memory-size = <MEM_SIZE_32M>;
> > - };
> > -};
> > -
> > &iomuxc {
> > pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_lpuart1>;
> > -
> > - imxrt1050-evk {
> > - pinctrl_lpuart1: lpuart1grp {
> > - fsl,pins = <
> > - MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
> > - 0xf1
> > - MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
> > - 0xf1
> > - >;
> > - };
> > -
> > - pinctrl_semc: semcgrp {
> > - fsl,pins = <
> > - MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
> > - 0xf1 /* SEMC_D0 */
> > - MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
> > - 0xf1 /* SEMC_D1 */
> > - MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
> > - 0xf1 /* SEMC_D2 */
> > - MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
> > - 0xf1 /* SEMC_D3 */
> > - MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
> > - 0xf1 /* SEMC_D4 */
> > - MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
> > - 0xf1 /* SEMC_D5 */
> > - MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
> > - 0xf1 /* SEMC_D6 */
> > - MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
> > - 0xf1 /* SEMC_D7 */
> > - MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
> > - 0xf1 /* SEMC_DM0 */
> > - MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
> > - 0xf1 /* SEMC_A0 */
> > - MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
> > - 0xf1 /* SEMC_A1 */
> > - MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
> > - 0xf1 /* SEMC_A2 */
> > - MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
> > - 0xf1 /* SEMC_A3 */
> > - MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
> > - 0xf1 /* SEMC_A4 */
> > - MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
> > - 0xf1 /* SEMC_A5 */
> > - MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
> > - 0xf1 /* SEMC_A6 */
> > - MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
> > - 0xf1 /* SEMC_A7 */
> > - MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
> > - 0xf1 /* SEMC_A8 */
> > - MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
> > - 0xf1 /* SEMC_A9 */
> > - MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
> > - 0xf1 /* SEMC_A11 */
> > - MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
> > - 0xf1 /* SEMC_A12 */
> > - MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
> > - 0xf1 /* SEMC_BA0 */
> > - MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
> > - 0xf1 /* SEMC_BA1 */
> > - MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
> > - 0xf1 /* SEMC_A10 */
> > - MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
> > - 0xf1 /* SEMC_CAS */
> > - MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
> > - 0xf1 /* SEMC_RAS */
> > - MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
> > - 0xf1 /* SEMC_CLK */
> > - MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
> > - 0xf1 /* SEMC_CKE */
> > - MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
> > - 0xf1 /* SEMC_WE */
> > - MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
> > - 0xf1 /* SEMC_CS0 */
> > - MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
> > - 0xf1 /* SEMC_D8 */
> > - MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
> > - 0xf1 /* SEMC_D9 */
> > - MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
> > - 0xf1 /* SEMC_D10 */
> > - MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
> > - 0xf1 /* SEMC_D11 */
> > - MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
> > - 0xf1 /* SEMC_D12 */
> > - MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
> > - 0xf1 /* SEMC_D13 */
> > - MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
> > - 0xf1 /* SEMC_D14 */
> > - MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
> > - 0xf1 /* SEMC_D15 */
> > - MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
> > - 0xf1 /* SEMC_DM1 */
> > - MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
> > - (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
> > - >;
> > - };
> > -
> > - pinctrl_usdhc0: usdhc0grp {
> > - fsl,pins = <
> > - MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
> > - 0x1B000
> > - MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
> > - 0xB069
> > - MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
> > - 0x17061
> > - MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
> > - 0x17061
> > - MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
> > - 0x17061
> > - MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
> > - 0x17061
> > - MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
> > - 0x17061
> > - MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
> > - 0x17061
> > - >;
> > - };
> > -
> > - pinctrl_lcdif: lcdifgrp {
> > - fsl,pins = <
> > - MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1
> > - MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069
> > - MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069
> > - >;
> > - };
> > + pinctrl_lpuart1: lpuart1grp {
> > + fsl,pins = <
> > + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1
> > + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1
> > + >;
> > };
> > -};
> >
> > -&gpt1 {
> > - status = "okay";
> > + pinctrl_usdhc0: usdhc0grp {
> > + fsl,pins = <
> > + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000
> > + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069
> > + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061
> > + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061
> > + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061
> > + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061
> > + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061
> > + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061
> > + >;
> > + };
> > };
> >
> > &usdhc1 {
> > @@ -226,42 +67,6 @@
> > pinctrl-1 = <&pinctrl_usdhc0>;
> > pinctrl-2 = <&pinctrl_usdhc0>;
> > pinctrl-3 = <&pinctrl_usdhc0>;
> > - status = "okay";
> > -
> > cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
> > -};
> > -
> > -&lcdif {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&pinctrl_lcdif>;
> > - display = <&display0>;
> > - status = "okay";
> > -
> > - display0: display0 {
> > - bits-per-pixel = <16>;
> > - bus-width = <16>;
> > -
> > - display-timings {
> > - timing0: timing0 {
> > - clock-frequency = <9300000>;
> > - hactive = <480>;
> > - vactive = <272>;
> > - hback-porch = <4>;
> > - hfront-porch = <8>;
> > - vback-porch = <4>;
> > - vfront-porch = <8>;
> > - hsync-len = <41>;
> > - vsync-len = <10>;
> > - de-active = <1>;
> > - pixelclk-active = <0>;
> > - hsync-active = <0>;
> > - vsync-active = <0>;
> > - };
> > - };
> > - };
> > -};
> > -
> > -&usbotg1 {
> > - dr_mode = "host";
> > status = "okay";
> > };
> > diff --git a/arch/arm/dts/imxrt1050-pinfunc.h b/arch/arm/dts/imxrt1050-pinfunc.h
> > index a29031ab3de..22c14a3262a 100644
> > --- a/arch/arm/dts/imxrt1050-pinfunc.h
> > +++ b/arch/arm/dts/imxrt1050-pinfunc.h
> > @@ -1,4 +1,4 @@
> > -/* SPDX-License-Identifier: GPL-2.0+ */
> > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> > /*
> > * Copyright (C) 2019
> > * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> > diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi
> > index 09f4712af68..03e6a858a7b 100644
> > --- a/arch/arm/dts/imxrt1050.dtsi
> > +++ b/arch/arm/dts/imxrt1050.dtsi
> > @@ -1,4 +1,4 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > /*
> > * Copyright (C) 2019
> > * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> > @@ -8,53 +8,37 @@
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/clock/imxrt1050-clock.h>
> > #include <dt-bindings/gpio/gpio.h>
> > -#include <dt-bindings/memory/imxrt-sdram.h>
> >
> > / {
> > #address-cells = <1>;
> > #size-cells = <1>;
> >
> > - aliases {
> > - display0 = &lcdif;
> > - gpio0 = &gpio1;
> > - gpio1 = &gpio2;
> > - gpio2 = &gpio3;
> > - gpio3 = &gpio4;
> > - gpio4 = &gpio5;
> > - mmc0 = &usdhc1;
> > - serial0 = &lpuart1;
> > - usbphy0 = &usbphy1;
> > - };
> > -
> > clocks {
> > osc: osc {
> > - compatible = "fsl,imx-osc", "fixed-clock";
> > + compatible = "fixed-clock";
> > #clock-cells = <0>;
> > clock-frequency = <24000000>;
> > };
> > - };
> >
> > - soc {
> > - semc: semc at 402f0000 {
> > - compatible = "fsl,imxrt-semc";
> > - reg = <0x402f0000 0x4000>;
> > - clocks = <&clks IMXRT1050_CLK_SEMC>;
> > - pinctrl-0 = <&pinctrl_semc>;
> > - pinctrl-names = "default";
> > - status = "okay";
> > + osc3M: osc3M {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <3000000>;
> > };
> > + };
> >
> > + soc {
> > lpuart1: serial at 40184000 {
> > - compatible = "fsl,imxrt-lpuart";
> > + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
> > reg = <0x40184000 0x4000>;
> > - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <20>;
> > clocks = <&clks IMXRT1050_CLK_LPUART1>;
> > - clock-names = "per";
> > + clock-names = "ipg";
> > status = "disabled";
> > };
> >
> > - iomuxc: iomuxc at 401f8000 {
> > - compatible = "fsl,imxrt-iomuxc";
> > + iomuxc: pinctrl at 401f8000 {
> > + compatible = "fsl,imxrt1050-iomuxc";
> > reg = <0x401f8000 0x4000>;
> > fsl,mux_mask = <0x7>;
> > };
> > @@ -64,31 +48,61 @@
> > reg = <0x400d8000 0x4000>;
> > };
> >
> > - clks: ccm at 400fc000 {
> > + clks: clock-controller at 400fc000 {
> > compatible = "fsl,imxrt1050-ccm";
> > reg = <0x400fc000 0x4000>;
> > - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <95>, <96>;
> > + clocks = <&osc>;
> > + clock-names = "osc";
> > #clock-cells = <1>;
> > - };
> > -
> > - usdhc1: usdhc at 402c0000 {
> > - compatible = "fsl,imxrt-usdhc";
> > - reg = <0x402c0000 0x10000>;
> > - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clks IMXRT1050_CLK_USDHC1>;
> > - clock-names = "per";
> > + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
> > + <&clks IMXRT1050_CLK_PLL1_BYPASS>,
> > + <&clks IMXRT1050_CLK_PLL2_BYPASS>,
> > + <&clks IMXRT1050_CLK_PLL3_BYPASS>,
> > + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
> > + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
> > + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
> > + <&clks IMXRT1050_CLK_PLL1_ARM>,
> > + <&clks IMXRT1050_CLK_PLL2_SYS>,
> > + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
> > + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
> > + <&clks IMXRT1050_CLK_PLL2_SYS>;
> > + };
> > +
> > + edma1: dma-controller at 400e8000 {
> > + #dma-cells = <2>;
> > + compatible = "fsl,imx7ulp-edma";
> > + reg = <0x400e8000 0x4000>,
> > + <0x400ec000 0x4000>;
> > + dma-channels = <32>;
> > + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
> > + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
> > + clock-names = "dma", "dmamux0";
> > + clocks = <&clks IMXRT1050_CLK_DMA>,
> > + <&clks IMXRT1050_CLK_DMA_MUX>;
> > + };
> > +
> > + usdhc1: mmc at 402c0000 {
> > + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
> > + reg = <0x402c0000 0x4000>;
> > + interrupts = <110>;
> > + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
> > + <&clks IMXRT1050_CLK_OSC>,
> > + <&clks IMXRT1050_CLK_USDHC1>;
> > + clock-names = "ipg", "ahb", "per";
> > bus-width = <4>;
> > + fsl,wp-controller;
> > + no-1-8-v;
> > + max-frequency = <4000000>;
> > fsl,tuning-start-tap = <20>;
> > - fsl,tuning-step= <2>;
> > + fsl,tuning-step = <2>;
> > status = "disabled";
> > };
> >
> > gpio1: gpio at 401b8000 {
> > - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> > + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> > reg = <0x401b8000 0x4000>;
> > - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <80>, <81>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > @@ -96,10 +110,9 @@
> > };
> >
> > gpio2: gpio at 401bc000 {
> > - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> > + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> > reg = <0x401bc000 0x4000>;
> > - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <82>, <83>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > @@ -107,10 +120,9 @@
> > };
> >
> > gpio3: gpio at 401c0000 {
> > - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> > + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> > reg = <0x401c0000 0x4000>;
> > - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <84>, <85>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > @@ -118,10 +130,9 @@
> > };
> >
> > gpio4: gpio at 401c4000 {
> > - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> > + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> > reg = <0x401c4000 0x4000>;
> > - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <86>, <87>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > @@ -129,60 +140,21 @@
> > };
> >
> > gpio5: gpio at 400c0000 {
> > - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> > + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> > reg = <0x400c0000 0x4000>;
> > - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupts = <88>, <89>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > #interrupt-cells = <2>;
> > };
> >
> > - lcdif: lcdif at 402b8000 {
> > - compatible = "fsl,imxrt-lcdif";
> > - reg = <0x402b8000 0x4000>;
> > - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
> > - <&clks IMXRT1050_CLK_LCDIF_APB>;
> > - clock-names = "pix", "axi";
> > - assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
> > - assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
> > - status = "disabled";
> > - };
> > -
> > - gpt1: gpt1 at 401ec000 {
> > - compatible = "fsl,imxrt-gpt";
> > + gpt: timer at 401ec000 {
> > + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
> > reg = <0x401ec000 0x4000>;
> > interrupts = <100>;
> > - clocks = <&osc>;
> > - status = "disabled";
> > - };
> > -
> > - usbphy1: usbphy at 400d9000 {
> > - compatible = "fsl,imxrt-usbphy";
> > - reg = <0x400d9000 0x1000>;
> > - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> > - };
> > -
> > - usbmisc: usbmisc at 402e0800 {
> > - #index-cells = <1>;
> > - compatible = "fsl,imxrt-usbmisc";
> > - reg = <0x402e0800 0x200>;
> > - clocks = <&clks IMXRT1050_CLK_USBOH3>;
> > - };
> > -
> > - usbotg1: usb at 402e0000 {
> > - compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
> > - reg = <0x402e0000 0x200>;
> > - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clks IMXRT1050_CLK_USBOH3>;
> > - fsl,usbphy = <&usbphy1>;
> > - fsl,usbmisc = <&usbmisc 0>;
> > - ahb-burst-config = <0x0>;
> > - tx-burst-size-dword = <0x10>;
> > - rx-burst-size-dword = <0x10>;
> > - status = "disabled";
> > + clocks = <&osc3M>;
> > + clock-names = "per";
> > };
> > };
> > };
> > diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h
> > index f74dbbcf937..93bef0832d1 100644
> > --- a/include/dt-bindings/clock/imxrt1050-clock.h
> > +++ b/include/dt-bindings/clock/imxrt1050-clock.h
> > @@ -1,4 +1,4 @@
> > -/* SPDX-License-Identifier: GPL-2.0+ */
> > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> > /*
> > * Copyright(C) 2019
> > * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> > @@ -62,6 +62,11 @@
> > #define IMXRT1050_CLK_PLL7_USB_HOST 53
> > #define IMXRT1050_CLK_LCDIF_PIX 54
> > #define IMXRT1050_CLK_USBOH3 55
> > -#define IMXRT1050_CLK_END 56
> > +#define IMXRT1050_CLK_IPG_PDOF 56
> > +#define IMXRT1050_CLK_PER_CLK_SEL 57
> > +#define IMXRT1050_CLK_PER_PDOF 58
> > +#define IMXRT1050_CLK_DMA 59
> > +#define IMXRT1050_CLK_DMA_MUX 60
> > +#define IMXRT1050_CLK_END 61
> >
> > #endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
More information about the U-Boot
mailing list