[PATCH v2 3/8] imxrt1050: synchronise device tree with linux
Jesse Taube
mr.bossman075 at gmail.com
Mon Oct 24 03:39:42 CEST 2022
On 10/22/22 08:57, Marcel Ziswiler wrote:
> Hi Jesse
>
> Sorry, I kinda missed your reply and imx maintainership was quiet for quite some time. I am now preparing a v3
> taking your feedback into account. Thanks!
>
> On Sun, 2022-08-28 at 02:50 -0400, Jesse Taube wrote:
>>
>>
>> On 8/26/22 14:31, Marcel Ziswiler wrote:
>>> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>>>
>>> Synchronise device tree with linux v6.0-rc1.
>>>
>>> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>>>
>>> ---
>>>
>>> Changes in v2:
>>> - imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
>>>
>>> arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 155 ++++++++++--
>>> arch/arm/dts/imxrt1050-evk.dts | 257 +++-----------------
>>> arch/arm/dts/imxrt1050-pinfunc.h | 2 +-
>>> arch/arm/dts/imxrt1050.dtsi | 168 ++++++-------
>>> include/dt-bindings/clock/imxrt1050-clock.h | 9 +-
>>> 5 files changed, 248 insertions(+), 343 deletions(-)
>>>
>>> diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
>>> index 617cece448a..7db53b19c2f 100644
>>> --- a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
>>> +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
>>> @@ -4,6 +4,8 @@
>>> * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
>>> */
>>>
>>> +#include <dt-bindings/memory/imxrt-sdram.h>
>>> +
>> #include "imxrt1050-pinfunc.h"
>
> Okay.
>
>>> / {
>>> chosen {
>>> u-boot,dm-spl;
>> diff says `tick-timer = &gpt;` its important for boot
>
> Okay.
>
>>> @@ -15,6 +17,52 @@
>>>
>>> soc {
>>> u-boot,dm-spl;
>>> +
>>> + semc at 402f0000 {
>>> + compatible = "fsl,imxrt-semc";
>>> + clocks = <&clks IMXRT1050_CLK_SEMC>;
>>> + pinctrl-0 = <&pinctrl_semc>;
>>> + pinctrl-names = "default";
>>> + reg = <0x402f0000 0x4000>;
>>> + status = "okay";
>>> + u-boot,dm-spl;
>> I dont think this part under should go here tell me if im wrong. It
>> should be move outside as a reference.
>
> Not sure what you mean as this is the U-Boot specific device tree include file after all.
>
>>> + /*
>>> + * Memory configuration from sdram datasheet IS42S16160J-6BLI
>>> + */
>>> + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
>>> + MUX_CSX0_SDRAM_CS1
>>> + 0
>>> + 0
>>> + 0
>>> + 0>;
>>> + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
>>> + BL_8
>>> + COL_9BITS
>>> + CL_3>;
>>> + fsl,sdram-timing = /bits/ 8 <0x2
>>> + 0x2
>>> + 0x9
>>> + 0x1
>>> + 0x5
>>> + 0x6
>>> +
>>> + 0x20
>>> + 0x09
>>> + 0x01
>>> + 0x00
>>> +
>>> + 0x04
>>> + 0x0A
>>> + 0x21
>>> + 0x50>;
>>> +
>>> + bank1: bank at 0 {
>>> + fsl,base-address = <0x80000000>;
>>> + fsl,memory-size = <MEM_SIZE_32M>;
>>> + u-boot,dm-spl;
>>> + };
>>> + };
>>> };
>>> };
>>>
>>> @@ -50,7 +98,7 @@
>>> u-boot,dm-spl;
>>> };
>>>
>>> -&gpt1 {
>>> +&gpt {
>> Add diff:
>> clocks = <&osc>;
>> compatible = "fsl,imxrt-gpt";
>> status = "okay";
>
> Okay.
>
>>> u-boot,dm-spl;
>>> };
>>>
>>> @@ -58,33 +106,108 @@
>>> u-boot,dm-spl;
>>> };
>>>
>>> -&semc {
>>> - u-boot,dm-spl;
>>> -
>>> - bank1: bank at 0 {
>>> - u-boot,dm-spl;
>>> - };
>>> -};
>>> -
>>> &iomuxc {
>>> u-boot,dm-spl;
>>>
>>> imxrt1050-evk {drop unneeded node ^^^
>>> u-boot,dm-spl;
>>> - pinctrl_lpuart1: lpuart1grp {
>>> - u-boot,dm-spl;
>>> - };
>>>
>>> pinctrl_semc: semcgrp {
>>> - u-boot,dm-spl;
>>> - };
>>> -
>>> - pinctrl_usdhc0: usdhc0grp {
>>> + fsl,pins = <
>>> + MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
>>> + 0xf1 /* SEMC_D0 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
>>> + 0xf1 /* SEMC_D1 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
>>> + 0xf1 /* SEMC_D2 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
>>> + 0xf1 /* SEMC_D3 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
>>> + 0xf1 /* SEMC_D4 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
>>> + 0xf1 /* SEMC_D5 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
>>> + 0xf1 /* SEMC_D6 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
>>> + 0xf1 /* SEMC_D7 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
>>> + 0xf1 /* SEMC_DM0 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
>>> + 0xf1 /* SEMC_A0 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
>>> + 0xf1 /* SEMC_A1 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
>>> + 0xf1 /* SEMC_A2 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
>>> + 0xf1 /* SEMC_A3 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
>>> + 0xf1 /* SEMC_A4 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
>>> + 0xf1 /* SEMC_A5 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
>>> + 0xf1 /* SEMC_A6 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
>>> + 0xf1 /* SEMC_A7 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
>>> + 0xf1 /* SEMC_A8 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
>>> + 0xf1 /* SEMC_A9 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
>>> + 0xf1 /* SEMC_A11 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
>>> + 0xf1 /* SEMC_A12 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
>>> + 0xf1 /* SEMC_BA0 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
>>> + 0xf1 /* SEMC_BA1 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
>>> + 0xf1 /* SEMC_A10 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
>>> + 0xf1 /* SEMC_CAS */
>>> + MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
>>> + 0xf1 /* SEMC_RAS */
>>> + MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
>>> + 0xf1 /* SEMC_CLK */
>>> + MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
>>> + 0xf1 /* SEMC_CKE */
>>> + MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
>>> + 0xf1 /* SEMC_WE */
>>> + MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
>>> + 0xf1 /* SEMC_CS0 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
>>> + 0xf1 /* SEMC_D8 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
>>> + 0xf1 /* SEMC_D9 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
>>> + 0xf1 /* SEMC_D10 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
>>> + 0xf1 /* SEMC_D11 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
>>> + 0xf1 /* SEMC_D12 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
>>> + 0xf1 /* SEMC_D13 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
>>> + 0xf1 /* SEMC_D14 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
>>> + 0xf1 /* SEMC_D15 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
>>> + 0xf1 /* SEMC_DM1 */
>>> + MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
>>> + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
>>> + >;
>>> u-boot,dm-spl;
>>> };
>>> };
>>> };
>>>
>>> +&pinctrl_lpuart1 {
>> Add diff:
>> compatible = "fsl,imxrt-lpuart";
>
> You probably meant that to go under the lpuart1 node but I got your point.
>
>>> + u-boot,dm-spl;
>>> +};
>>> +
>>> +&pinctrl_usdhc0 {
>> Add diff:
>> compatible = "fsl,imxrt-usdhc";
>
> And this under the usdhc1 one.
>
>> I tested this
>> https://github.com/Mr-Bossman/u-boot/commit/42a7f430d761bb4d44f646a27649deda15352f2e
>
> That commit seems totally different from any of this series. Not sure.
It's this patch with the changes nessasary to make it boot added on top.
Please sqash them into this patch and take notes as to the diff.
Everything that was removed by the syncing should be added into the
-u-boot.dts So pinctl for SMEC and SMEC timing need to be moved as well
as compatibles.
Thanks,
Jesse
>
>> Some note for future, check if the compatibles are the same they arent
>> here so the soc.dtsi will be broken. Also wait a bit for other people to
>> resopnd to patches before sending out v2 because no one commented on the
>> other patches yet.
>
> Sure, sure.
>
> Cheers
>
> Marcel
>
>> Thanks,
>> Jesse
>>> + u-boot,dm-spl;
>>> +};
>>> +
>>> &usdhc1 {
>>> u-boot,dm-spl;
>>> };
>>> diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts
>>> index fb2da3adfcf..6a9c10decf5 100644
>>> --- a/arch/arm/dts/imxrt1050-evk.dts
>>> +++ b/arch/arm/dts/imxrt1050-evk.dts
>>> @@ -1,4 +1,4 @@
>>> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> /*
>>> * Copyright (C) 2019
>>> * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
>>> @@ -6,7 +6,6 @@
>>>
>>> /dts-v1/;
>>> #include "imxrt1050.dtsi"
>>> -#include "imxrt1050-evk-u-boot.dtsi"
>>> #include "imxrt1050-pinfunc.h"
>>>
>>> / {
>>> @@ -14,210 +13,52 @@
>>> compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
>>>
>>> chosen {
>>> - bootargs = "root=/dev/ram";
>>> - stdout-path = "serial0:115200n8";
>>> - tick-timer = &gpt1;
>>> + stdout-path = &lpuart1;
>>> };
>>>
>>> - memory {
>>> + aliases {
>>> + gpio0 = &gpio1;
>>> + gpio1 = &gpio2;
>>> + gpio2 = &gpio3;
>>> + gpio3 = &gpio4;
>>> + gpio4 = &gpio5;
>>> + mmc0 = &usdhc1;
>>> + serial0 = &lpuart1;
>>> + };
>>> +
>>> + memory at 80000000 {
>>> device_type = "memory";
>>> reg = <0x80000000 0x2000000>;
>>> };
>>> };
>>>
>>> -&lpuart1 { /* console */
>>> +&lpuart1 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&pinctrl_lpuart1>;
>>> status = "okay";
>>> };
>>>
>>> -&semc {
>>> - /*
>>> - * Memory configuration from sdram datasheet IS42S16160J-6BLI
>>> - */
>>> - fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
>>> - MUX_CSX0_SDRAM_CS1
>>> - 0
>>> - 0
>>> - 0
>>> - 0>;
>>> - fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
>>> - BL_8
>>> - COL_9BITS
>>> - CL_3>;
>>> - fsl,sdram-timing = /bits/ 8 <0x2
>>> - 0x2
>>> - 0x9
>>> - 0x1
>>> - 0x5
>>> - 0x6
>>> -
>>> - 0x20
>>> - 0x09
>>> - 0x01
>>> - 0x00
>>> -
>>> - 0x04
>>> - 0x0A
>>> - 0x21
>>> - 0x50>;
>>> -
>>> - bank1: bank at 0 {
>>> - fsl,base-address = <0x80000000>;
>>> - fsl,memory-size = <MEM_SIZE_32M>;
>>> - };
>>> -};
>>> -
>>> &iomuxc {
>>> pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_lpuart1>;
>>> -
>>> - imxrt1050-evk {
>>> - pinctrl_lpuart1: lpuart1grp {
>>> - fsl,pins = <
>>> - MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
>>> - 0xf1
>>> - MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
>>> - 0xf1
>>> - >;
>>> - };
>>> -
>>> - pinctrl_semc: semcgrp {
>>> - fsl,pins = <
>>> - MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
>>> - 0xf1 /* SEMC_D0 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
>>> - 0xf1 /* SEMC_D1 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
>>> - 0xf1 /* SEMC_D2 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
>>> - 0xf1 /* SEMC_D3 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
>>> - 0xf1 /* SEMC_D4 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
>>> - 0xf1 /* SEMC_D5 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
>>> - 0xf1 /* SEMC_D6 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
>>> - 0xf1 /* SEMC_D7 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
>>> - 0xf1 /* SEMC_DM0 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
>>> - 0xf1 /* SEMC_A0 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
>>> - 0xf1 /* SEMC_A1 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
>>> - 0xf1 /* SEMC_A2 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
>>> - 0xf1 /* SEMC_A3 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
>>> - 0xf1 /* SEMC_A4 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
>>> - 0xf1 /* SEMC_A5 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
>>> - 0xf1 /* SEMC_A6 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
>>> - 0xf1 /* SEMC_A7 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
>>> - 0xf1 /* SEMC_A8 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
>>> - 0xf1 /* SEMC_A9 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
>>> - 0xf1 /* SEMC_A11 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
>>> - 0xf1 /* SEMC_A12 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
>>> - 0xf1 /* SEMC_BA0 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
>>> - 0xf1 /* SEMC_BA1 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
>>> - 0xf1 /* SEMC_A10 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
>>> - 0xf1 /* SEMC_CAS */
>>> - MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
>>> - 0xf1 /* SEMC_RAS */
>>> - MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
>>> - 0xf1 /* SEMC_CLK */
>>> - MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
>>> - 0xf1 /* SEMC_CKE */
>>> - MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
>>> - 0xf1 /* SEMC_WE */
>>> - MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
>>> - 0xf1 /* SEMC_CS0 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
>>> - 0xf1 /* SEMC_D8 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
>>> - 0xf1 /* SEMC_D9 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
>>> - 0xf1 /* SEMC_D10 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
>>> - 0xf1 /* SEMC_D11 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
>>> - 0xf1 /* SEMC_D12 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
>>> - 0xf1 /* SEMC_D13 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
>>> - 0xf1 /* SEMC_D14 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
>>> - 0xf1 /* SEMC_D15 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
>>> - 0xf1 /* SEMC_DM1 */
>>> - MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
>>> - (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
>>> - >;
>>> - };
>>> -
>>> - pinctrl_usdhc0: usdhc0grp {
>>> - fsl,pins = <
>>> - MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
>>> - 0x1B000
>>> - MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
>>> - 0xB069
>>> - MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
>>> - 0x17061
>>> - MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
>>> - 0x17061
>>> - MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
>>> - 0x17061
>>> - MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
>>> - 0x17061
>>> - MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
>>> - 0x17061
>>> - MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
>>> - 0x17061
>>> - >;
>>> - };
>>> -
>>> - pinctrl_lcdif: lcdifgrp {
>>> - fsl,pins = <
>>> - MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1
>>> - MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069
>>> - MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069
>>> - >;
>>> - };
>>> + pinctrl_lpuart1: lpuart1grp {
>>> + fsl,pins = <
>>> + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1
>>> + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1
>>> + >;
>>> };
>>> -};
>>>
>>> -&gpt1 {
>>> - status = "okay";
>>> + pinctrl_usdhc0: usdhc0grp {
>>> + fsl,pins = <
>>> + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000
>>> + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069
>>> + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061
>>> + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061
>>> + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061
>>> + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061
>>> + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061
>>> + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061
>>> + >;
>>> + };
>>> };
>>>
>>> &usdhc1 {
>>> @@ -226,42 +67,6 @@
>>> pinctrl-1 = <&pinctrl_usdhc0>;
>>> pinctrl-2 = <&pinctrl_usdhc0>;
>>> pinctrl-3 = <&pinctrl_usdhc0>;
>>> - status = "okay";
>>> -
>>> cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
>>> -};
>>> -
>>> -&lcdif {
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_lcdif>;
>>> - display = <&display0>;
>>> - status = "okay";
>>> -
>>> - display0: display0 {
>>> - bits-per-pixel = <16>;
>>> - bus-width = <16>;
>>> -
>>> - display-timings {
>>> - timing0: timing0 {
>>> - clock-frequency = <9300000>;
>>> - hactive = <480>;
>>> - vactive = <272>;
>>> - hback-porch = <4>;
>>> - hfront-porch = <8>;
>>> - vback-porch = <4>;
>>> - vfront-porch = <8>;
>>> - hsync-len = <41>;
>>> - vsync-len = <10>;
>>> - de-active = <1>;
>>> - pixelclk-active = <0>;
>>> - hsync-active = <0>;
>>> - vsync-active = <0>;
>>> - };
>>> - };
>>> - };
>>> -};
>>> -
>>> -&usbotg1 {
>>> - dr_mode = "host";
>>> status = "okay";
>>> };
>>> diff --git a/arch/arm/dts/imxrt1050-pinfunc.h b/arch/arm/dts/imxrt1050-pinfunc.h
>>> index a29031ab3de..22c14a3262a 100644
>>> --- a/arch/arm/dts/imxrt1050-pinfunc.h
>>> +++ b/arch/arm/dts/imxrt1050-pinfunc.h
>>> @@ -1,4 +1,4 @@
>>> -/* SPDX-License-Identifier: GPL-2.0+ */
>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>>> /*
>>> * Copyright (C) 2019
>>> * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
>>> diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi
>>> index 09f4712af68..03e6a858a7b 100644
>>> --- a/arch/arm/dts/imxrt1050.dtsi
>>> +++ b/arch/arm/dts/imxrt1050.dtsi
>>> @@ -1,4 +1,4 @@
>>> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> /*
>>> * Copyright (C) 2019
>>> * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
>>> @@ -8,53 +8,37 @@
>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> #include <dt-bindings/clock/imxrt1050-clock.h>
>>> #include <dt-bindings/gpio/gpio.h>
>>> -#include <dt-bindings/memory/imxrt-sdram.h>
>>>
>>> / {
>>> #address-cells = <1>;
>>> #size-cells = <1>;
>>>
>>> - aliases {
>>> - display0 = &lcdif;
>>> - gpio0 = &gpio1;
>>> - gpio1 = &gpio2;
>>> - gpio2 = &gpio3;
>>> - gpio3 = &gpio4;
>>> - gpio4 = &gpio5;
>>> - mmc0 = &usdhc1;
>>> - serial0 = &lpuart1;
>>> - usbphy0 = &usbphy1;
>>> - };
>>> -
>>> clocks {
>>> osc: osc {
>>> - compatible = "fsl,imx-osc", "fixed-clock";
>>> + compatible = "fixed-clock";
>>> #clock-cells = <0>;
>>> clock-frequency = <24000000>;
>>> };
>>> - };
>>>
>>> - soc {
>>> - semc: semc at 402f0000 {
>>> - compatible = "fsl,imxrt-semc";
>>> - reg = <0x402f0000 0x4000>;
>>> - clocks = <&clks IMXRT1050_CLK_SEMC>;
>>> - pinctrl-0 = <&pinctrl_semc>;
>>> - pinctrl-names = "default";
>>> - status = "okay";
>>> + osc3M: osc3M {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + clock-frequency = <3000000>;
>>> };
>>> + };
>>>
>>> + soc {
>>> lpuart1: serial at 40184000 {
>>> - compatible = "fsl,imxrt-lpuart";
>>> + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
>>> reg = <0x40184000 0x4000>;
>>> - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <20>;
>>> clocks = <&clks IMXRT1050_CLK_LPUART1>;
>>> - clock-names = "per";
>>> + clock-names = "ipg";
>>> status = "disabled";
>>> };
>>>
>>> - iomuxc: iomuxc at 401f8000 {
>>> - compatible = "fsl,imxrt-iomuxc";
>>> + iomuxc: pinctrl at 401f8000 {
>>> + compatible = "fsl,imxrt1050-iomuxc";
>>> reg = <0x401f8000 0x4000>;
>>> fsl,mux_mask = <0x7>;
>>> };
>>> @@ -64,31 +48,61 @@
>>> reg = <0x400d8000 0x4000>;
>>> };
>>>
>>> - clks: ccm at 400fc000 {
>>> + clks: clock-controller at 400fc000 {
>>> compatible = "fsl,imxrt1050-ccm";
>>> reg = <0x400fc000 0x4000>;
>>> - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <95>, <96>;
>>> + clocks = <&osc>;
>>> + clock-names = "osc";
>>> #clock-cells = <1>;
>>> - };
>>> -
>>> - usdhc1: usdhc at 402c0000 {
>>> - compatible = "fsl,imxrt-usdhc";
>>> - reg = <0x402c0000 0x10000>;
>>> - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&clks IMXRT1050_CLK_USDHC1>;
>>> - clock-names = "per";
>>> + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
>>> + <&clks IMXRT1050_CLK_PLL1_BYPASS>,
>>> + <&clks IMXRT1050_CLK_PLL2_BYPASS>,
>>> + <&clks IMXRT1050_CLK_PLL3_BYPASS>,
>>> + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
>>> + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
>>> + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
>>> + <&clks IMXRT1050_CLK_PLL1_ARM>,
>>> + <&clks IMXRT1050_CLK_PLL2_SYS>,
>>> + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
>>> + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
>>> + <&clks IMXRT1050_CLK_PLL2_SYS>;
>>> + };
>>> +
>>> + edma1: dma-controller at 400e8000 {
>>> + #dma-cells = <2>;
>>> + compatible = "fsl,imx7ulp-edma";
>>> + reg = <0x400e8000 0x4000>,
>>> + <0x400ec000 0x4000>;
>>> + dma-channels = <32>;
>>> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
>>> + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
>>> + clock-names = "dma", "dmamux0";
>>> + clocks = <&clks IMXRT1050_CLK_DMA>,
>>> + <&clks IMXRT1050_CLK_DMA_MUX>;
>>> + };
>>> +
>>> + usdhc1: mmc at 402c0000 {
>>> + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
>>> + reg = <0x402c0000 0x4000>;
>>> + interrupts = <110>;
>>> + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
>>> + <&clks IMXRT1050_CLK_OSC>,
>>> + <&clks IMXRT1050_CLK_USDHC1>;
>>> + clock-names = "ipg", "ahb", "per";
>>> bus-width = <4>;
>>> + fsl,wp-controller;
>>> + no-1-8-v;
>>> + max-frequency = <4000000>;
>>> fsl,tuning-start-tap = <20>;
>>> - fsl,tuning-step= <2>;
>>> + fsl,tuning-step = <2>;
>>> status = "disabled";
>>> };
>>>
>>> gpio1: gpio at 401b8000 {
>>> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>>> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
>>> reg = <0x401b8000 0x4000>;
>>> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <80>, <81>;
>>> gpio-controller;
>>> #gpio-cells = <2>;
>>> interrupt-controller;
>>> @@ -96,10 +110,9 @@
>>> };
>>>
>>> gpio2: gpio at 401bc000 {
>>> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>>> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
>>> reg = <0x401bc000 0x4000>;
>>> - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <82>, <83>;
>>> gpio-controller;
>>> #gpio-cells = <2>;
>>> interrupt-controller;
>>> @@ -107,10 +120,9 @@
>>> };
>>>
>>> gpio3: gpio at 401c0000 {
>>> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>>> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
>>> reg = <0x401c0000 0x4000>;
>>> - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <84>, <85>;
>>> gpio-controller;
>>> #gpio-cells = <2>;
>>> interrupt-controller;
>>> @@ -118,10 +130,9 @@
>>> };
>>>
>>> gpio4: gpio at 401c4000 {
>>> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>>> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
>>> reg = <0x401c4000 0x4000>;
>>> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <86>, <87>;
>>> gpio-controller;
>>> #gpio-cells = <2>;
>>> interrupt-controller;
>>> @@ -129,60 +140,21 @@
>>> };
>>>
>>> gpio5: gpio at 400c0000 {
>>> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>>> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
>>> reg = <0x400c0000 0x4000>;
>>> - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
>>> - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupts = <88>, <89>;
>>> gpio-controller;
>>> #gpio-cells = <2>;
>>> interrupt-controller;
>>> #interrupt-cells = <2>;
>>> };
>>>
>>> - lcdif: lcdif at 402b8000 {
>>> - compatible = "fsl,imxrt-lcdif";
>>> - reg = <0x402b8000 0x4000>;
>>> - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
>>> - <&clks IMXRT1050_CLK_LCDIF_APB>;
>>> - clock-names = "pix", "axi";
>>> - assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
>>> - assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - gpt1: gpt1 at 401ec000 {
>>> - compatible = "fsl,imxrt-gpt";
>>> + gpt: timer at 401ec000 {
>>> + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
>>> reg = <0x401ec000 0x4000>;
>>> interrupts = <100>;
>>> - clocks = <&osc>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - usbphy1: usbphy at 400d9000 {
>>> - compatible = "fsl,imxrt-usbphy";
>>> - reg = <0x400d9000 0x1000>;
>>> - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
>>> - };
>>> -
>>> - usbmisc: usbmisc at 402e0800 {
>>> - #index-cells = <1>;
>>> - compatible = "fsl,imxrt-usbmisc";
>>> - reg = <0x402e0800 0x200>;
>>> - clocks = <&clks IMXRT1050_CLK_USBOH3>;
>>> - };
>>> -
>>> - usbotg1: usb at 402e0000 {
>>> - compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
>>> - reg = <0x402e0000 0x200>;
>>> - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
>>> - clocks = <&clks IMXRT1050_CLK_USBOH3>;
>>> - fsl,usbphy = <&usbphy1>;
>>> - fsl,usbmisc = <&usbmisc 0>;
>>> - ahb-burst-config = <0x0>;
>>> - tx-burst-size-dword = <0x10>;
>>> - rx-burst-size-dword = <0x10>;
>>> - status = "disabled";
>>> + clocks = <&osc3M>;
>>> + clock-names = "per";
>>> };
>>> };
>>> };
>>> diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h
>>> index f74dbbcf937..93bef0832d1 100644
>>> --- a/include/dt-bindings/clock/imxrt1050-clock.h
>>> +++ b/include/dt-bindings/clock/imxrt1050-clock.h
>>> @@ -1,4 +1,4 @@
>>> -/* SPDX-License-Identifier: GPL-2.0+ */
>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>>> /*
>>> * Copyright(C) 2019
>>> * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
>>> @@ -62,6 +62,11 @@
>>> #define IMXRT1050_CLK_PLL7_USB_HOST 53
>>> #define IMXRT1050_CLK_LCDIF_PIX 54
>>> #define IMXRT1050_CLK_USBOH3 55
>>> -#define IMXRT1050_CLK_END 56
>>> +#define IMXRT1050_CLK_IPG_PDOF 56
>>> +#define IMXRT1050_CLK_PER_CLK_SEL 57
>>> +#define IMXRT1050_CLK_PER_PDOF 58
>>> +#define IMXRT1050_CLK_DMA 59
>>> +#define IMXRT1050_CLK_DMA_MUX 60
>>> +#define IMXRT1050_CLK_END 61
>>>
>>> #endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
More information about the U-Boot
mailing list